Instrukcja obsługi bezprzewodowego systemu mikrofonowego LiNKFOR UHF

Wstęp

Thank you for choosing the LiNKFOR UHF Wireless Microphone System. This system is designed to provide clear, high-fidelity audio for various applications, including outdoor events, weddings, conferences, karaoke, and parties. With stable UHF signal transmission and high-sensitivity sound capture, it ensures an excellent audio experience. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's lifespan.

Informacje dotyczące bezpieczeństwa

• This package contains only the wireless microphone system. An additional audio device (speaker or amplifier) is required to output sound.
• The output volume depends on the power output of your speakers. We do not recommend using this microphone with speakers less than 15 watts.
• Do not use the microphone too close to the receiver to avoid sound interference.
• Keep the receiver away from metal objects or any digital devices (such as computers, mobile phones, etc.) to avoid potential sources of interference.
• Do not cover the microphone head with your hand, as this may damage it or affect performance.
• For optimal performance and to reduce plosives, we recommend using a foam cover on the microphone.

Zawartość opakowania

Proszę dokładnie sprawdzić przesyłkę i upewnić się, że znajdują się w niej wszystkie elementy:

• 1 x Wireless Microphone Receiver
• 2 x mikrofony ręczne
• 2 x Anteny
• 1 x Batteries (AA, quantity 4 needed for microphones)
• 1 x kabel audio (6.35 mm)
• 1 x Certified Power Adapter
• 1 x 3.5mm Male to 6.35mm Female Stereo Adapter
• 1 x Instrukcja obsługi

Produkt ponadview

Figure 1: Complete LiNKFOR UHF Wireless Microphone System

Rysunek 2: Szczegółowy view of the receiver and microphones

Kluczowe komponenty:

• Odbiornik bezprzewodowy: The central unit that receives signals from the microphones. Features power button, volume controls (Vol-A, Vol-B), and input/output ports.
• Mikrofony ręczne: Two dynamic, non-directional microphones with ON/OFF switches and LCD displays showing channel/frequency.
• Anteny: Two antennas for stable UHF signal reception.
• Zasilacz: For powering the receiver.
• Audio Cables/Adapters: For connecting the receiver to an amplifier lub głośnik aktywny.

Instrukcje konfiguracji

Follow these steps to set up your LiNKFOR Wireless Microphone System:

1. Włącz odbiornik: Plug the receiver's power adapter into a power outlet and then into the receiver. Turn on the receiver.
2. Connect to Audio Output: Use the provided audio cable to connect the receiver's output jack to the input jack of your ampgłośniki niskotonowe lub aktywne.
   • If your speaker has a 3.5mm jack, use the included 6.35mm to 3.5mm adapter.
3. Connect Background Audio (Optional): To play background music, connect your TV, PC, DVD, VOD, or other audio devices to your amplifier lub głośnik aktywny.
4. Connect External Speaker (If applicable): If using a passive speaker, connect it to your amplifier using an audio cable to produce sound. (Skip this step if using active speakers).
5. Insert Microphone Batteries: Insert 2 AA batteries into each handheld microphone. Ensure correct polarity.
6. Włączanie mikrofonów: Turn on the handheld microphones. They should automatically connect to the receiver.

Figure 3: User enjoying the wireless microphone system.

Instrukcja obsługi

Once setup is complete, you can begin using your microphone system:

• Regulacja głośności: Use the volume knobs on the receiver (Vol-A for Microphone A, Vol-B for Microphone B) to adjust the individual microphone volumes.
• Użycie mikrofonu: Aby uzyskać optymalny odbiór dźwięku, trzymaj mikrofon w odległości około 2-6 cm od ust.
• Freedom of Movement: The wireless design allows you to move freely within the transmission range (up to 60m, ideally 80m).
• Jakość dźwięku: The system is equipped with a sound filter and high-sensitivity sound head to effectively filter excessive external noise and capture strong, clear audio.

Figure 4: The system is suitable for various performance settings.

Konserwacja

• Czyszczenie: Use a soft, dry cloth to clean the receiver and microphones. Do not use liquid cleaners or abrasive materials.
• Składowanie: Jeśli system nie będzie używany przez dłuższy czas, należy wyjąć baterie z mikrofonów i przechowywać go w chłodnym, suchym miejscu.
• Czas pracy baterii: The microphones offer a long battery life (typically 2 to 8 hours). Replace batteries when performance degrades.

Rozwiązywanie problemów

How to Avoid Interference:

• Microphone Proximity: Do not use the microphone too close to the receiver to prevent sound interference (feedback).
• Umieszczenie odbiornika: Keep the receiver away from metal objects or any digital devices (e.g., computers, mobile phones) to avoid potential interference sources.
• Obsługa mikrofonu: Do not cover the microphone head with your hand, as this can cause damage or affect sound quality.
• Low Volume/No Sound:
  • Ensure the receiver is powered on and connected correctly to your ampwzmacniacz/głośnik.
  • Check if the microphones are turned on and have fresh batteries.
  • Verify the volume levels on both the receiver and your ampwzmacniacz/głośnik.
  • Potwierdź, że amplifier/speaker has sufficient power (recommended 15 watts or more).
• Zniekształcony dźwięk:
  • Reduce the microphone volume on the receiver or the ampliyfikator.
  • Ensure the microphone is not too close to your mouth or the speaker.
  • Check for strong electromagnetic interference from other devices nearby.

Specyfikacje

Gwarancja i wsparcie

For warranty information and technical support, please refer to the contact details provided on the LiNKFOR official webOdwiedź witrynę lub skontaktuj się ze sprzedawcą. Zachowaj paragon jako dowód zakupu na wypadek roszczeń gwarancyjnych.