Crivit 3D Sensor Pedometer Instruction Manual

Wstęp

This manual provides essential information for the proper use and maintenance of your Crivit 3D Sensor Pedometer, Model 307012. This device is designed to track your physical activity, including steps, distance, and calories burned, using advanced 3D sensor technology. Please read these instructions carefully before using the pedometer to ensure optimal performance and longevity.

Cechy

• 3D Sensor Technology: Allows for accurate step counting regardless of placement (e.g., pocket, keychain).
• Wyświetlacz wielofunkcyjny: Shows number of steps, distance, duration, speed, calorie consumption, fat burn, temperature, and current time.
• 7-Day Memory: Stores activity data for the past seven days.
• Spersonalizowane ustawienia: Individual adjustment for body height, weight, and stride length for improved accuracy.
• Podświetlany ekran LCD: Zapewnia wyraźną widoczność w różnych warunkach oświetleniowych.
• Attachment Clip: Dla bezpiecznego i wygodnego noszenia.
• Bateria w zestawie: Operates with one CR2032 3V battery.

Produkt ponadview

Image: The Crivit 3D Sensor Pedometer, featuring a red casing, an LCD screen, and an integrated clip for attachment. The display shows numerical data.

Organizować coś

1. Instalacja baterii

1. Locate the battery compartment on the back of the pedometer.
2. Use a small coin or screwdriver to open the battery cover.
3. Insert one CR2032 3V battery with the positive (+) side facing up.
4. Załóż pokrywę baterii i zabezpiecz ją.

2. Ustawienia początkowe

Upon first use or after battery replacement, you will need to set your personal data for accurate tracking.

1. Ustawienie czasu: Follow the on-screen prompts to set the current time (12-hour or 24-hour format).
2. Wybór jednostki: Choose between metric (cm/kg) or imperial (inches/lbs) units.
3. Wysokość: Podaj swój wzrost.
4. Waga: Enter your body weight.
5. Długość kroku: Measure and enter your average stride length. This can be estimated by walking 10 steps, measuring the total distance, and dividing by 10.
6. Confirm all settings to save.

Instrukcja obsługi

1. Włączanie/wyłączanie zasilania

• The pedometer typically powers on automatically when activity is detected or a button is pressed.
• To conserve battery, the device may enter a sleep mode after a period of inactivity. Press any button to wake it up.

2. Nawigacja po trybach wyświetlania

Use the mode button (usually labeled 'MODE' or similar) to cycle through different display screens:

• Kroki: Displays the total number of steps taken for the current day.
• Dystans: Pokazuje całkowity pokonany dystans.
• Kalorie: Indicates the estimated calories burned.
• Czas trwania: Displays the active time.
• Prędkość: Shows your average speed.
• Fat Burn: Displays an estimate of fat burned.
• Temperatura: Pokazuje temperaturę otoczenia.
• Czas: Wyświetla aktualny czas.

3. Resetting Daily Data

To reset the daily activity data (steps, distance, calories) to zero, typically press and hold the 'RESET' button for a few seconds while on the main display screen. Refer to the specific button layout on your device.

4. Accessing 7-Day Memory

The pedometer stores data for the past seven days. Use the 'MEMORY' or 'HISTORY' button (if available) to review previous days' activity. The display will typically show the date and the corresponding activity data.

Konserwacja

Czyszczenie

Wipe the pedometer with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device. Avoid submerging the pedometer in water.

Wymiana baterii

When the battery indicator appears low or the display becomes dim, replace the CR2032 3V battery following the installation steps in the 'Setup' section. Dispose of used batteries responsibly according to local regulations.

Składowanie

Store the pedometer in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.

Rozwiązywanie problemów

• Krokomierz nie zlicza kroków:
  - Ensure the battery is correctly installed and charged.
  - Check if the device is securely attached or placed in a pocket where movement can be detected.
  - Verify that personal settings (stride length, height) are correctly entered.
• Wyświetlacz jest pusty lub przyciemniony:
  - Replace the battery.
  - Ensure the battery is inserted with correct polarity.
• Niedokładne odczyty:
  - Re-enter your personal settings (height, weight, stride length).
  - Ensure the pedometer is not subjected to excessive shaking or vibrations that are not related to walking.
• Przyciski nie reagują:
  - Try removing and reinserting the battery to perform a soft reset.
  - Ensure the buttons are not obstructed.

Specyfikacje

Gwarancja i wsparcie

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Crivit webZachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.