Wstęp
Thank you for choosing the Lepro 5m RGB LED Strip Light. This manual provides detailed instructions for the safe and efficient use of your new LED strip light. Please read this manual thoroughly before installation and operation, and retain it for future reference.
This LED strip light features music synchronization, remote control operation, and offers a wide range of colors for various indoor decorative lighting applications.
Zawartość opakowania
Ensure all components are present and in good condition:
- 1 x 5m RGB LED Strip Light
- 1 x Pilot zdalnego sterowania
- 1 x Skrzynka sterownicza
- 1 x Power Adapter (GS Certified)
- 6 x Fixing Clips with Screws
- 1 x Instrukcja obsługi
Instrukcje bezpieczeństwa
Aby zapewnić bezpieczną obsługę, należy przestrzegać następujących zasad:
- Ten produkt jest przeznaczony dla tylko do użytku wewnątrz pomieszczeńNie wystawiać na działanie wody i wysokiej wilgotności.
- Upewnij się, że napięcie zasilaniatage matches the product's requirements (12V DC).
- Do not connect the LED strip directly to 240V AC power without the provided adapter.
- Avoid bending the LED strip sharply or folding it, as this may damage the circuit.
- Nie należy przykrywać paska LED materiałami, które mogą utrudniać odprowadzanie ciepła.
- Przechowywać w miejscu niedostępnym dla dzieci.
- Odłącz zasilanie przed czyszczeniem lub konserwacją.
Główne cechy
The Lepro 5m LED Strip Light offers a range of features for an enhanced lighting experience:
- Żywe oświetlenie RGB: Enjoy a spectrum of colors including Red, Green, Blue, and White, with dimmable options to set the perfect mood.
- Synchronizacja muzyki: A built-in high-sensitivity microphone allows the lights to flash and change color in sync with music beats or voice.
- Metody podwójnej kontroli: Conveniently control your lights using either the included infrared remote control or the inline control box.
- Łatwa instalacja: Equipped with strong 3M adhesive and additional fixing clips for secure and straightforward setup on various surfaces.
- Zwiększona jasność: Features 30 LEDs per meter, providing 250% more brightness compared to standard LED strips with fewer LEDs.

Image: Brightness comparison of Lepro LED strip.

Image: Lepro 5m LED Strip Lights creating a vibrant atmosphere.
Konfiguracja i instalacja
Aby przeprowadzić prawidłową instalację, wykonaj następujące czynności:
1. Prepare the Surface
Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free from dust or oil. This will ensure optimal adhesion of the 3M adhesive tape.

Image: Step 1 - Wipe the surface clean.
2. Attach the LED Strip
Peel off the protective backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the prepared surface, ensuring firm contact along its entire length. For corners, avoid sharp bends; use connectors (not included) or gently curve the strip.

Image: Step 2 - Stick the strip light.
3. Secure with Fixing Clips (Optional but Recommended)
For added security, especially on textured surfaces or in areas where the strip might be disturbed, use the provided fixing clips. Place clips at regular intervals and secure them with screws. This helps maintain the strip's position firmly.

Image: Fixing clips for enhanced stability.
4. Podłącz zasilacz
Connect the LED strip to the control box, and then connect the control box to the power adapter. Finally, plug the power adapter into a standard electrical outlet. Ensure all connections are secure.

Image: Power supply connection diagram. Remember to pull out the plastic chip from the remote before use.
Instrukcja obsługi
Your Lepro LED Strip Light can be controlled via the included remote control or the inline control box.
Obsługa za pomocą pilota
Ensure the remote control's plastic battery tab is removed before first use. Point the remote directly at the infrared receiver on the control box.

Image: Remote control layout.
- WŁ./WYŁ.: Naciśnij, aby włączyć lub wyłączyć światło.
- Kontrola jasności: Użyj Jasność +/- buttons to adjust light intensity.
- Wybór kolorów: Choose from 16 preset colors using the color buttons.
- Tryby oświetlenia: Select from 7 dynamic lighting modes (e.g., Flash, Strobe, Fade, Smooth).
- Kontrola prędkości: Dostosuj prędkość trybów dynamicznych za pomocą Prędkość +/- pikolak.
- Tryby muzyczne: Activate 4 music synchronization modes. The built-in microphone will detect sound and change colors/brightness accordingly.
Działanie skrzynki kontrolnej
The inline control box provides basic functionality:

Image: Dual control methods with remote and inline controller.
- Przycisk zasilania: Naciśnij, aby włączyć lub wyłączyć światło.
- Przycisk trybu: Cycle through various colors and dynamic modes.
- Synchronizacja muzyki: The control box also has a built-in microphone for music synchronization.
Music Synchronization Feature
The integrated high-sensitivity microphone allows the LED strip to react to sound. In music mode, the lights will flash and change color in sync with the rhythm, melody, or beat of your music or voice.

Image: LED strip lights synchronizing with music.
Konserwacja
Regular maintenance ensures the longevity and optimal performance of your LED strip light.
- Czyszczenie: Disconnect the power before cleaning. Use a soft, dry cloth to gently wipe the LED strip and control box. Do not use abrasive cleaners or immerse any part in water.
- Kontrola przyczepności: Periodically check the adhesion of the strip. If it starts to peel, re-secure it with additional adhesive tape or the provided fixing clips.
- Składowanie: If storing the LED strip for an extended period, ensure it is clean, dry, and rolled loosely to prevent damage to the circuit.
Rozwiązywanie problemów
Jeśli napotkasz problemy, zapoznaj się z poniższymi typowymi problemami i rozwiązaniami:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Światła nie włączają się. |
|
|
| Pilot nie działa. |
|
|
| Światła są słabe lub migoczą. |
|
|
| Synchronizacja muzyki nie działa. |
|
|
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Numer modelu | PR410089-RGB-EU |
| Marka | Trąd |
| Długość | 5 metrów |
| Kolor | RGB (Red, Green, Blue, White) |
| Typ źródła światła | PROWADZONY |
| Liczba diod LED | 300 |
| Cotage | 18 watów |
| Tomtage | 240 Volts (AC input), 12V DC (output) |
| Metoda kontroli | Remote Control, Control Box |
| Technologia łączności | Podczerwony |
| Cechy specjalne | Dimmable, RGB, Music Synchronization |
| Do użytku wewnątrz/na zewnątrz | Wnętrz |
| Poziom wodoodporności | Nie wodoodporny |
| Tworzywo | Plastikowy |
| Współczynnik kształtu | Elastyczny pasek |
| Wymiary produktu (dł. x szer. x wys.) | 10 x 7 x 10 cm (packaging/controller dimensions) |
| Waga przedmiotu | 220 gram |
| Bateria | 1 Lithium metal (included for remote) |
Gwarancja i wsparcie
This product comes with a 1-year warranty for spare parts, as indicated by the manufacturer. For warranty claims, technical support, or any questions regarding your Lepro LED Strip Light, please contact Lepro customer service through your retailer or the official Lepro webstrona.
Please have your model number (PR410089-RGB-EU) and proof of purchase ready when contacting support.