Hamilton H82375161

Hamilton Khaki Navy Automatic Men's Watch

Model: H82375161

Wstęp

Thank you for choosing the Hamilton Khaki Navy Automatic Men's Watch. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.

Organizować coś

1. Rozpakowanie i wstępna inspekcja

Upon receiving your Hamilton Khaki Navy Automatic watch, carefully remove it from its packaging. Inspect the watch for any visible damage or irregularities. Ensure all protective films are removed from the crystal, case, and bracelet.

2. Nakręcanie zegarka

Your Hamilton Khaki Navy Automatic watch is powered by a Swiss automatic movement. Before setting the time, it is recommended to manually wind the watch to ensure sufficient power reserve. To do this:

  1. Unscrew the crown counter-clockwise until it is in the unwound position (Position 0).
  2. Turn the crown clockwise approximately 20-30 times. This will initiate the movement and build up a power reserve.
  3. The watch will start running.

3. Ustawianie godziny i daty

Aby ustawić godzinę i datę na zegarku:

  1. Unscrew the crown counter-clockwise to Position 0.
  2. Pull the crown out to Position 2 (first click) to set the date. Turn the crown clockwise or counter-clockwise until the correct date is displayed. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement.
  3. Pull the crown out to Position 3 (second click) to set the time. Turn the crown to move the hands clockwise until the correct time is displayed. Ensure the AM/PM is correctly set by observing if the date changes when passing midnight.
  4. Once the time and date are set, push the crown back into Position 0 and screw it clockwise firmly against the case to ensure water resistance.
Przód view of the Hamilton Khaki Navy Automatic watch with a green dial and stainless steel bracelet.

Obraz: Przód view of the Hamilton Khaki Navy Automatic watch, showcasing its green dial, luminous hands, and stainless steel bracelet. The crown is visible on the right side of the case.

4. Regulacja bransoletki

The stainless steel bracelet of your watch can be adjusted for a comfortable fit. This typically involves removing or adding links. It is recommended to have this adjustment performed by a qualified watchmaker or an authorized Hamilton service center to prevent damage to the bracelet or clasp.

Obsługa zegarka

1. Automatic Movement Functionality

Your watch features a self-winding automatic movement. This means the watch is powered by the natural motion of your wrist. When worn regularly, the movement of your arm causes an oscillating weight inside the watch to rotate, winding the mainspring and storing energy. If the watch is not worn for an extended period, it will stop. Simply wind it manually as described in the 'Setup' section or wear it for several hours to restart it.

2. Water Resistance (100m / 330ft)

The Hamilton Khaki Navy Automatic watch is water-resistant up to 100 meters (330 feet). This rating makes it suitable for swimming, snorkeling, and showering. However, it is not designed for scuba diving. Always ensure the crown is fully screwed down before exposing the watch to water. Do not operate the crown or pushers (if present) while the watch is wet or submerged, as this can compromise its water resistance.

3. Jednokierunkowo obrotowy pierścień

The watch is equipped with a unidirectional rotating bezel. This bezel can be used to measure elapsed time, typically for diving or other timed activities. To use it:

  1. Obróć pierścień przeciwnie do ruchu wskazówek zegara, aż znacznik zera zrówna się ze wskazówką minutową.
  2. W miarę upływu czasu, wskazówka minutowa będzie wskazywać upływający czas na skali pierścienia.
  3. The bezel rotates only in one direction to prevent accidental changes that could overestimate elapsed time, a critical safety feature for divers.
Strona view of the Hamilton Khaki Navy Automatic watch, showing the crown and bezel.

Obraz: Bok view of the Hamilton Khaki Navy Automatic watch, highlighting the textured crown and the edge of the unidirectional rotating bezel.

Konserwacja

1. Czyszczenie zegarka

To maintain the appearance of your watch, clean it regularly. For stainless steel cases and bracelets, use a soft, damp cloth. For more thorough cleaning, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly with a soft cloth. Ensure the crown is fully screwed down before cleaning with water.

2. Przechowywanie

Gdy nie nosisz zegarka, przechowuj go w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego, ekstremalnych temperatur i silnych pól magnetycznych. Oryginalne pudełko na zegarek jest idealne do przechowywania.

3. Service and Inspection

Like any precision instrument, your automatic watch requires periodic servicing to ensure optimal performance and accuracy. It is recommended to have your watch inspected and serviced by an authorized Hamilton service center every 3-5 years. This service typically includes cleaning, lubrication, and adjustment of the movement, as well as replacement of seals to maintain water resistance.

4. Sapphire Crystal Care

The watch features a scratch-resistant sapphire crystal. While highly durable, it is not entirely impervious to damage. Avoid impacts and contact with abrasive surfaces to prevent scratches or chips.

Rozwiązywanie problemów

  • Uważaj, żeby nie biegać: If the watch has stopped, it likely needs to be wound. Manually wind it 20-30 times using the crown (Position 0, clockwise rotation) or wear it consistently for several hours.
  • Niedokładność czasu: Minor variations in timekeeping are normal for mechanical watches. If your watch is consistently running too fast or too slow beyond acceptable limits (typically +/- 15-30 seconds per day), it may require adjustment by a professional watchmaker. Exposure to strong magnetic fields can also affect accuracy; demagnetization may be necessary.
  • Kondensacja pod kryształem: If you notice condensation under the crystal, this indicates a breach in water resistance. Immediately take the watch to an authorized service center to prevent further damage to the movement.

Specyfikacje

Numer modeluH82375161
Typ ruchuSzwajcarski Automatyczny
Materiał obudowyStal nierdzewna
Średnica koperty40 milimetrów
Grubość obudowy12.95 milimetrów
Materiał paskaStal nierdzewna
Przepustowość łącza20 milimetrów
Kolor tarczyZielony
KryształSzkło szafirowe
Głębokość wodoodporności100 metrów (330 stopy)
Rodzaj zapięciaZapięcie składane
Waga przedmiotu156 gram
Hamilton Khaki Navy Automatic watch on a wrist.

Image: The Hamilton Khaki Navy Automatic watch displayed on a wrist, showing its proportions and fit.

Gwarancja

Your Hamilton Khaki Navy Automatic watch comes with a Limited Warranty. The terms and conditions of this warranty are provided with your purchase documentation. For detailed information regarding warranty coverage, duration, and claims, please refer to the official Hamilton website or contact an authorized Hamilton retailer.

Wsparcie

For any questions, service requests, or technical assistance not covered in this manual, please contact Hamilton Customer Service or visit an authorized Hamilton service center. Contact information can typically be found on the official Hamilton webna stronie internetowej lub w miejscu zakupu.

Official Hamilton Webstrona: www.hamiltonwatch.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.