Audimute Soundproofing Acoustic Door Seal Kit

Produkt ponadview

The Audimute Acoustic Door Seal Kit is designed to significantly reduce sound transmission through and around your door. Sound can easily travel through even the smallest gaps. This kit provides an effective solution by sealing these common air gaps, creating a more soundproof environment. It includes both a door seal for the frame and a door sweep for the bottom of the door.

Główne cechy:

• Includes a Door Seal (3/16" x 1/2" x 25') and a Door Sweep (1/2" x 1.5" x 4').
• Designed to treat 1 standard size door.
• Soundproofing Door Seal Kits will help to block sound from traveling through gaps around doors.
• Łatwy w instalacji.
• Great in apartments, studios, or anywhere that sound is entering or exiting through a door.

Instrukcja instalacji

For optimal performance, follow these installation steps carefully. A clean, dry surface is essential for proper adhesion.

Zawartość zestawu:

• 1 roll of one-sided, self-adhesive Acoustic Door Seal tape (3/16" x 1/2" x 25')
• 1 roll of one-sided, self-adhesive Door Sweep tape (1/2" x 1.5" x 4')

Image: The Audimute Acoustic Door Seal Kit, showing one roll of black door seal tape and one roll of gray door sweep tape.

Instalacja krok po kroku:

Obejrzyj oficjalny film instruktażowy dotyczący instalacji, aby zapoznać się z wizualną instrukcją:

1. Przygotuj powierzchnię: Ensure the door jamb and door stop surfaces are clean and free of dust or dirt. Use a clean cloth to wipe down all areas where the seal will be applied.
2. Install Door Seal (Hinge Side): On the hinge side of the door frame, measure the height for the seal. Cut the Acoustic Door Seal tape to the measured length. Carefully peel off the paper backing and adhere the foam seal directly to the door jamb, pressing firmly along its entire length.
3. Install Door Seal (Top): On the top of the door frame, measure the width for the seal. Cut the Acoustic Door Seal tape to the measured length. Peel off the paper backing and adhere the foam seal to the upper door stop, ensuring a tight fit.
4. Install Door Seal (Handle Side): Repeat the process from Step 2 for the handle side of the door frame. Measure the height, cut the seal, remove the backing, and adhere it firmly to the door stop.
5. Install Door Sweep: Make sure the bottom edge of your door is clean. Measure the width of the door for the sweep. Cut the Acoustic Door Sweep tape to the measured length. Peel off the paper backing and adhere the foam sweep directly to the bottom edge of the door. It is best to attach the sweep on the side of the door where the noise is coming from, or the side that closes against the door frame.

Image: A person applying the self-adhesive door sweep to the bottom edge of a door, demonstrating the ease of installation.

For a printable version of the installation manual, please refer to the Instrukcja instalacji (PDF).

Zastosowanie i korzyści

Once installed, the Audimute Acoustic Door Seal Kit works by creating a tight barrier around your door, preventing air and sound from passing through gaps. This significantly improves the sound isolation of your room, reducing noise transfer in or out. It is ideal for home offices, recording studios, bedrooms, or any space where sound control is desired.

Konserwacja

The Audimute Acoustic Door Seal Kit requires minimal maintenance. Periodically inspect the seals for any signs of wear or damage. If dust or debris accumulates, gently wipe the foam with a clean, damp szmatką. Unikaj stosowania silnych środków chemicznych lub ściernych środków czyszczących, ponieważ mogą one uszkodzić materiał lub klej.

Rozwiązywanie problemów

Light Visible Through Gaps:

If you can see light passing through the gaps around your door after installation, it indicates that the seal is not completely airtight. Use a flashlight to pinpoint the exact location of the gaps. If light gets through, consider adding another layer of seal in that specific area or carefully repositioning the existing seal to ensure full coverage and compression when the door is closed.

Specyfikacje

Gwarancja i wsparcie

Audimute products are designed for quality and durability. For specific warranty information, please refer to the product packaging or contact Audimute customer service directly. Our team is dedicated to helping you achieve your sound management goals.

For personalized sound advice or any questions regarding your Acoustic Door Seal Kit, please reach out to us:

• Telefon: 1.866.505.WYCISZ
• Webstrona: audimute.com