Browning BTC-5HD-MAX

Browning Strike Force HD MAX Trail Camera User Manual

Model: BTC-5HD-MAX

Wstęp

This manual provides detailed instructions for the setup, operation, and maintenance of your Browning Strike Force HD MAX trail camera. Please read this manual thoroughly before using the camera to ensure proper function and to maximize its performance in monitoring wildlife.

The Strike Force HD MAX is designed for reliable outdoor use, featuring 18 MP image capability, 100 ft. flash range, and adjustable trigger speeds. It captures high-quality photos and 1600x900p HD videos with sound, utilizing "Zero Blur" technology for clear night images and Smart IR video for continuous recording when motion is detected.

Organizować coś

1. Instalacja baterii

The Strike Force HD MAX camera requires 6 AA batteries (not included). For optimal performance, use high-quality alkaline or lithium batteries.

  1. Otwórz zatrzask obudowy kamery.
  2. Zlokalizuj komorę baterii.
  3. Włóż 6 baterie AA, zwracając uwagę na prawidłową biegunowość (+/-), zgodnie ze wskazaniami wewnątrz komory.
  4. Dokładnie zamknij komorę baterii.
Browning Strike Force HD MAX trail camera with the front panel open, revealing the control screen, buttons, and SD card slot.

Rycina 1: Przód view of the camera with the control panel open, showing the screen and buttons.

2. Instalacja karty SD

The camera supports SDXC memory cards up to 512GB (not included). A high-speed SD card (Class 10 or higher) is recommended for video recording.

  1. Po otwarciu obudowy kamery znajdź gniazdo karty SD.
  2. Włóż kartę SD do gniazda etykietą skierowaną do przodu, aż do zatrzaśnięcia.
  3. To remove, press the SD card gently to eject it.

3. Montaż kamery

The camera can be mounted using the included tree strap or a 1/4"-20 tripod socket.

  • Tree Strap: Thread the strap through the loops on the back of the camera and secure it around a tree or post.
  • Gniazdo statywu: Attach the camera to a compatible tripod or mounting bracket using the 1/4"-20 threaded insert located at the bottom of the camera.
Z powrotem view of the Browning Strike Force HD MAX trail camera, showing the mounting strap loops and manufacturer markings.

Rysunek 2: Tył view of the camera, highlighting the strap loops for mounting.

Instrukcja obsługi

1. Włączanie/wyłączanie zasilania

  • To power on, slide the ON/OFF switch to the ON position. The screen will illuminate.
  • To power off, slide the ON/OFF switch to the WYŁĄCZONY pozycja.

2. Poruszanie się po Menu

Use the control buttons (E, Up, Down, Left, Right) to navigate the camera's menu on the LCD screen.

  • Przycisk MODE: Switches between different operating modes (e.g., Photo, Video, Photo+Video).
  • Przycisk E: Enters a menu option or confirms a selection.
  • Przyciski strzałek: Poruszaj się po opcjach menu i dostosuj ustawienia.

3. Ustawienia klawiszy

  • Rozdzielczość obrazu: Set to 18 MP for highest quality photos.
  • Rozdzielczość wideo: Select 1600x900p HD for high-definition video with sound. Video length can be set from 5 seconds to 2 minutes.
  • Prędkość wyzwalania: Adjustable from 0.2 to 0.7 seconds. A faster trigger speed is suitable for capturing fast-moving subjects.
  • Zasięg wykrywania: User-adjustable up to 80 ft.
  • Czas regeneracji: The camera has a 0.6 second recovery time between pictures.
  • IR LED Illumination: Adjustable settings for night vision (Power Save, Long Range, Fast Motion). Illuma-Smart Technology automatically adjusts flash for optimal night photos.
  • Multi Shot / Rapid Fire: Capture up to 8 images per trigger.
  • Smart IR Video: Allows the camera to continue recording video during the day when game is present.
  • Opóźnienie obrazu: Programmable delay from 1 second to 60 minutes between triggers.
  • Start/Stop Image Timer: Selectable timer to define specific operating hours for the camera.
Browning Strike Force HD MAX trail camera in its closed, ready-to-deploy state, showing the camouflage casing i soczewka.

Figure 3: The camera in its closed position, ready for deployment.

Konserwacja

  • Czyszczenie: Do czyszczenia obiektywu i obudowy aparatu używaj miękkiej, suchej ściereczki. Unikaj środków czyszczących o właściwościach ściernych i rozpuszczalników.
  • Wymiana baterii: Replace batteries when the battery meter indicates low power. Always replace all batteries at once with new ones.
  • Zarządzanie kartami SD: Regularly check and format your SD card to ensure optimal performance and prevent data corruption. Use the camera's SD card management option.
  • Składowanie: Jeśli aparat nie będzie używany przez dłuższy czas, należy wyjąć baterie i przechowywać go w chłodnym, suchym miejscu.

Rozwiązywanie problemów

ProblemMożliwa przyczyna / rozwiązanie
Kamera się nie włącza.
  • Sprawdź biegunowość baterii.
  • Wymień na nowe baterie.
  • Ensure the ON/OFF switch is fully in the ON position.
Brak zdjęć/filmów.
  • Sprawdź, czy karta SD jest włożona prawidłowo i czy nie jest pełna.
  • Sformatuj kartę SD.
  • Check detection range and sensitivity settings.
  • Verify camera is in an active mode (Photo, Video, or Photo+Video).
  • Check programmable picture delay settings.
Poor night images.
  • Adjust IR LED Illumination settings (Power Save, Long Range, Fast Motion).
  • Upewnij się, że żadne przeszkody nie blokują diod LED IR.
  • Check battery level; low batteries can affect flash performance.
Krótki czas pracy baterii.
  • Use high-quality alkaline or lithium batteries.
  • Reduce video length or frequency of captures.
  • Check for excessive triggers due to environmental factors (e.g., moving branches).

Specyfikacje

Nazwa modeluStrike Force HD MAX
Numer modeluBTC-5HD-MAX
Rozdzielczość obrazu18 MP
Rozdzielczość wideo1600x900p HD with Sound
Zasięg błysku100 stóp.
Szybkość wyzwalaniaRegulowany 0.2 – 0.7 sekundy
Czas regeneracji0.6 sekund
Zasięg wykrywaniaAdjustable up to 80 ft.
Wizja nocnaInfrared LED Illumination, Zero Blur Technology, Illuma-Smart Technology
Obsługa kart pamięciUp to 512GB SDXC (not included)
Źródło zasilania6 baterii AA (brak w zestawie), zewnętrzne gniazdo zasilania 12 V
MontowanieTree strap, 1/4"-20 Tripod Socket
Wymiary4.25" x 3" x 2.5" (Compact case size)
Stopień wodoodpornościIP54

Informacje o gwarancji

The Browning Strike Force HD MAX trail camera comes with a Roczna gwarancja producenta against defects. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Browning webodwiedź witrynę lub skontaktuj się z działem obsługi klienta.

Obsługa klienta

For technical assistance, troubleshooting, or warranty inquiries, please visit the official Browning website or contact their customer support department. You can often find FAQs and additional resources online.

Zasoby internetowe: www.browning.com

© 2024 Browning. Wszelkie prawa zastrzeżone.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.