DAP 7079818219
DAP Dynaflex Ultra Advanced Exterior Sealant User Manual
Model: 7079818219
Wstęp
The DAP Dynaflex Ultra Advanced Exterior Sealant is designed to provide a long-lasting, weatherproof seal for various exterior and interior applications. Formulated with Weather Max Technology, it resists UV fading, chalking, crumbling, cracking, and dirt buildup. This sealant offers strong adhesion to common building materials and remains permanently flexible, ensuring all-weather protection. It is rain-ready and paintable in just one hour, is waterproof, low in odor, and cleans up easily with water.
Informacje dotyczące bezpieczeństwa
Always read the product label and Safety Data Sheet (SDS) before use. Ensure adequate ventilation during application. Avoid contact with eyes and skin. In case of contact, flush immediately with water. Keep out of reach of children and pets. Wear appropriate personal protective equipment, such as gloves and eye protection. Dispose of unused product and containers according to local regulations.
Ostrzeżenie dotyczące propozycji 65: Produkt ten zawiera substancje chemiczne, o których władze stanu Kalifornia wiedzą, że mogą powodować raka, wady wrodzone lub inne szkody reprodukcyjne.
Organizować coś
- Przygotuj powierzchnię: Ensure the surface is clean, dry, and free of old sealant, dirt, dust, and other contaminants. For best adhesion, surfaces should be structurally sound.
- Cut the Nozzle: Cut the nozzle at a 45-degree angle to achieve the desired bead size. A 3/8-inch bead is recommended for optimal joint protection.
- Load into Caulk Gun: Load the sealant cartridge into a standard caulking gun.
Image: Preparation and application of sealant. The surface must be clean and dry. Cut the nozzle at a 45-degree angle to the desired bead size. Load the cartridge into a caulk gun.
Instrukcja obsługi
- Nałóż uszczelniacz: Fill the gap with sealant, applying a consistent 3/8-inch bead for optimal joint protection.
- Tool/Smooth Bead: Tool or smooth the applied bead within 10 minutes of application to ensure good contact and a clean finish.
Video: A person demonstrates applying DAP Dynaflex Ultra Advanced Exterior Sealant to a kitchen sink area. The video highlights the smooth application and ease of control with a caulking gun. It also mentions the sealant's waterproof, flexible, mold, and mildew resistant properties, making it suitable for high-moisture environments.
Video: This video shows the application of DAP Dynaflex Ultra Advanced Exterior Sealant to seal a leaky cellar door frame. The user demonstrates cutting the nozzle, loading the caulk gun, applying a consistent bead, and smoothing it with a wet paper towel. The sealant's flexibility and ability to handle temperature changes are emphasized, along with its effectiveness in preventing water leaks.
Aplikacje
DAP Dynaflex Ultra Advanced Exterior Sealant is suitable for a wide range of exterior and interior applications, including:
- Okna
- Drzwi
- Bocznica
- Przycinać
- Eaves & Soffits
- Sealing joints up to 1 inch wide
It adheres strongly to various materials, including:
- Drewno
- Aluminium
- Most Metals
- Winyl
- PVC Trimboard
- Most Plastics
- Cement włóknisty
- Cegła
- Mortar/Stone
- Beton
- Plaster/Stucco
- Szkło
Image: Multi-material adhesion. The sealant is effective on a wide range of building materials.
Image: Ideal for sealing around eaves, soffits, siding, doors, and windows.
Drying & Curing
- Tack-Free Time: Dries tack-free in approximately 30 minutes.
- Rain-Ready Time: Rain-ready in 1 hour, preventing wash-out or rain marks.
- Paint-Ready Time: Paintable in 1 hour (depending on joint depth, temperature, and humidity). Use a latex primer for oil-based paints. The sealant provides excellent paint coverage with latex and oil-based paints and all sheens.
- Pełny czas utwardzania: Reaches full performance in 24 hours.
Image: The sealant is ready for rain and paint in just one hour, ensuring no wash-out and excellent paint adhesion.
Konserwacja
- Sprzątać: Clean up excess uncured sealant with a damp sponge before it skins over.
- Cured Sealant Removal: Scrape or cut away any excess cured sealant.
- Opór: The sealant is mold, mildew, and algae resistant, reducing the need for frequent cleaning in high-moisture areas. Its hydrophobic surface prevents water absorption and resists dirt pickup.
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Kolor | Jasnoszary |
| Marka | DAP |
| Waga przedmiotu | 14.9 uncji |
| Objętość cieczy | 10.1 uncje płynu (300 ml) |
| Czas całkowitego utwardzania | 24 godzin |
| Initial Hardening Time | 30 Minutes (Tack-Free) |
| Formularz przedmiotu | Pasta |
| Maximum Gap Fill | 0.5 Inches (up to 1 inch for joints) |
| Zalecenia dotyczące powierzchni | Zewnętrzna/Wewnętrzna |
| Zakres temperatur | 40 to 100 Degrees Fahrenheit (Application) |
| Poziom wodoodporności | Wodoodporny |
| Tworzywo | Advanced Latex |
| Wymiary produktu | 2 x 2 x 11.25 cala |
| Numer modelu | 7079818219 |
| UPC | 070798182196 |
Rozwiązywanie problemów
- Słaba przyczepność: Ensure surfaces are clean, dry, and free of loose material. Roughen smooth surfaces if necessary.
- Sealant Not Curing: Verify application temperature is within the recommended range (40 to 100°F). High humidity can sometimes slow curing, but this product is designed for quick rain-readiness.
- Cracking/Peeling: Ensure proper surface preparation and application of a sufficient bead size. The product is designed for flexibility, but extreme movement or improper application can lead to issues.
- Uneven Bead: Practice applying the sealant on a scrap surface to achieve a consistent bead. Use a wet finger or tooling tool to smooth the bead immediately after application.
Gwarancja i wsparcie
For specific warranty information and customer support, please refer to the product packaging or contact DAP directly. General product information and support resources may be available on the DAP Store on Amazon.