WORKPRO Cordless Hot Melt Glue Gun User Manual

Wstęp

Thank you for choosing the WORKPRO Cordless Hot Melt Glue Gun. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read all instructions carefully before use and retain this manual for future reference.

Informacje dotyczące bezpieczeństwa

Uwaga: Always read the product instructions carefully before using the glue gun.

• Use only the original charger or a 5V/1A charger to charge the cordless hot melt glue gun.
• This is a lithium-ion cordless hot glue gun. Always use the cordless glue gun after unplugging the charging cable.
• The glue gun's nozzle and melted glue can reach high temperatures. Avoid direct contact with skin to prevent burns.
• The surface of the glue gun is made of flame-retardant material to protect your hands from burns during normal operation.
• Przechowywać w miejscu niedostępnym dla dzieci.

Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy wymienione poniżej:

• 1 x WORKPRO 3.6V Cordless Glue Gun
• 20 x Premium Mini Hot Melt Glue Sticks
• 1 x Charger (USB cable and adapter)
• 1 x Instrukcja obsługi

Organizować coś

1. Charging the Glue Gun

Before first use, ensure the glue gun is fully charged. The battery indicator lights will show the charging status.

• Connect the charger to the USB charging port located at the rear of the glue gun.
• Podłącz ładowarkę do standardowego gniazdka ściennego.
• The battery indicator light will be red while charging and turn green when fully charged. A full charge takes approximately 3.5 hours.
• Once fully charged, disconnect the charger before use.

2. Inserting a Glue Stick

• Ensure the glue gun is turned off and cool.
• Insert a premium mini hot melt glue stick into the circular opening at the back of the glue gun until it stops.

Instrukcja obsługi

1. Turning On and Preheating

• Press and hold the power switch (ON/OFF button) for approximately 3 seconds to turn on the glue gun.
• The working status indicator light will illuminate.
• Allow the glue gun to preheat for about 2 minutes. The advanced PTC heating system ensures rapid heating.
• Once preheated, the working status indicator will change to indicate readiness (e.g., solid green).

2. Nakładanie kleju

• Once the glue gun is preheated, gently press the trigger to dispense melted glue.
• The glue gun features a drip-free nozzle to minimize mess during use.
• The WORKPRO glue gun offers a fast dispensing speed of 0.18 oz/5 g per minute.

3. Automatic Power-Off Protection

The smart linkage switch automatically cuts off power after 8 minutes of inactivity. This feature protects the user and conserves energy.

4. Korzystanie ze zintegrowanego stojaka

The glue gun includes a small bracket near the nozzle. This bracket can be folded down to act as a stand, allowing you to safely rest the hot glue gun on a surface without the hot nozzle touching it, preventing drips and potential damage.

5. Wyłączanie

To manually turn off the glue gun, press and hold the power switch for approximately 3 seconds. The automatic power-off feature will also activate after 8 minutes of inactivity.

Konserwacja

• Ładowanie: If you do not use the glue gun for a long time, remember to charge it every 15 days to maintain battery health.
• Czyszczenie: Ensure the glue gun is completely cool and unplugged before cleaning. Gently wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Składowanie: Store the glue gun in a dry, cool place, away from direct sunlight and extreme temperatures.

Rozwiązywanie problemów

Specyfikacje

Demonstracja wideo produktu

Gwarancja i wsparcie

Szczegóły dotyczące gwarancji i dane kontaktowe działu obsługi klienta są zazwyczaj dołączone do opakowania produktu lub na oficjalnej stronie producenta. website. Please refer to those resources for comprehensive warranty coverage and assistance.