Instrukcja obsługi rękawic roboczych o wysokiej widoczności CAT® CAT017411M

1. Koniec produktuview

The CAT® CAT017411M High Visibility Work Gloves are designed for hand protection in various work environments, particularly in low-light conditions. These gloves feature a polyester shell construction for durability and a textured latex coating on the palm and fingers for enhanced grip and resistance. The knit wrist design ensures a secure fit and helps prevent debris entry.

Image: A pair of CAT® CAT017411M High Visibility Work Gloves. The gloves are bright yellow-green with black textured latex coating on the palms and fingers, and a black CAT logo on the wrist cuff.

2. Główne cechy

• Projekt o wysokiej widoczności: Bright yellow-green polyester shell enhances visibility in low-light conditions.
• Trwała konstrukcja: Polyester shell provides strength and longevity.
• Ulepszony chwyt: Textured latex coating on palms and fingers offers improved grip and resistance to tears and temperature fluctuations.
• Bezpieczne dopasowanie: Knit wrist design ensures a snug fit, preventing accidental slipping and keeping out dirt and debris.
• Normy bezpieczeństwa: Tested to EN388:2016 - 2142X for protection against puncture, abrasion, cut, and tears.

3. Instrukcje użytkowania

1. Wybór: Ensure the correct glove size is chosen for a comfortable and secure fit.
2. Zakładanie: Slide hands into the gloves, ensuring fingers are fully seated and the knit wrist is snug around the wrist.
3. Aplikacja: These gloves are suitable for general work tasks requiring hand protection against abrasions, minor cuts, and for situations where high visibility is beneficial. Examples include material handling, assembly tasks, and general maintenance.
4. Zdejmowanie: To remove, grasp the cuff of one glove and pull it off, turning it inside out. Repeat for the other glove.

4. Pielęgnacja i konserwacja

• Czyszczenie: If soiled, gently wipe the gloves with a damp cloth. For heavier soiling, hand wash with mild soap and cold water. Avoid harsh detergents or bleach.
• Wysuszenie: Air dry thoroughly away from direct heat or sunlight. Do not machine dry.
• Składowanie: Store gloves in a cool, dry place away from direct sunlight, chemicals, and sharp objects.
• Kontrola: Regularly inspect gloves for signs of wear, tears, punctures, or damage before each use.

5. Informacje dotyczące bezpieczeństwa

These gloves are designed to provide protection against specific hazards as indicated by their EN388:2016 rating. However, no glove can provide complete protection against all risks. Always assess the specific hazards of your work environment.

• EN388:2016 - 2142X Rating: This indicates resistance levels for:
  • Abrasion Resistance (Level 2)
  • Circular Blade Cut Resistance (Level 1)
  • Tear Resistance (Level 4)
  • Puncture Resistance (Level 2)
  • Impact Protection (X - Not tested or not applicable)
• Ograniczenia: Do not use these gloves near moving machinery where entanglement is a risk. Not intended for protection against extreme heat, open flames, or chemical immersion unless specifically rated for such.
• Wymiana: Replace gloves immediately if they show any signs of damage, wear, or degradation, as their protective qualities may be compromised.
• Ostrzeżenie dotyczące propozycji 65: Ten produkt może narazić Cię na działanie substancji chemicznych, o których stan Kalifornia wie, że powodują raka, wady wrodzone lub inne uszkodzenia układu rozrodczego. Aby uzyskać więcej informacji, odwiedź stronę www.P65Warnings.ca.gov.

6. Specyfikacje

7. Rozwiązywanie Problemów

As a protective garment, troubleshooting for work gloves is generally limited to inspection and replacement.

• Wydanie: Gloves feel loose or are slipping during use.
  Rozwiązanie: Ensure the correct size was selected. If the gloves have stretched due to prolonged use, consider replacement.
• Wydanie: Reduced grip.
  Rozwiązanie: Inspect the latex coating for wear or damage. Clean gloves if they are soiled with grease or dirt. If coating is significantly worn, replace gloves.
• Wydanie: Visible damage (tears, holes, excessive wear).
  Rozwiązanie: Immediately discontinue use and replace the gloves. Damaged gloves offer compromised protection.

8. Gwarancja i wsparcie

For information regarding warranty coverage, product support, or to report any issues with your CAT® CAT017411M High Visibility Work Gloves, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.

You can visit the official CAT store for more information: CAT Official Store