Instrukcja obsługi jednostki sterującej Cisco Touch 10

Wstęp

The Cisco Touch 10 control unit is an intuitive device designed to provide a seamless experience when interacting with Cisco video conferencing systems. It allows users to manage video conferences, share content, access contact lists, and view voicemail messages with simple touch and swipe gestures. This unit is compatible with Cisco Webex Room Series and Webex Board video conferencing devices. Its customizable interface allows for adding or removing buttons and panels to control the video system or the conference room environment, including room scheduling.

Produkt ponadview

Rycina 1: Przód view of the Cisco Touch 10 Control Unit displaying its main interface with icons for Call, Share, Lights & Shades, and Messages.

The Cisco Touch 10 features a 10.1-inch capacitive touch LCD with a resolution of 1280 x 800. It serves as the primary interface for controlling various aspects of your Cisco video conferencing setup.

Przewodnik po konfiguracji

1. Rozpakowanie i kontrola

• Carefully remove the Cisco Touch 10 unit from its packaging.
• Inspect the unit for any visible damage. If damage is found, contact your supplier immediately.
• Ensure all components listed in the packing slip are present.

2. Umieszczenie

• Place the Touch 10 on a stable, flat surface within easy reach of users.
• Należy zapewnić odpowiednią wentylację wokół urządzenia.
• Unikać umieszczania urządzenia w pobliżu źródeł ciepła lub w bezpośrednim świetle słonecznym.

3. Connecting to the System

The Touch 10 connects to your Cisco video conferencing system (e.g., Webex Room Series, Webex Board) via a network cable. The unit typically receives power over Ethernet (PoE) from the video system or a PoE-enabled network switch.

1. Connect one end of an Ethernet cable to the LAN port on the back of the Touch 10 unit.
2. Connect the other end of the Ethernet cable to the designated control port on your Cisco video conferencing system or a PoE-enabled network switch.
3. The unit will power on automatically and begin the pairing process with the video system. Follow any on-screen prompts to complete the setup.

Instrukcja obsługi

Podstawowa nawigacja

• Dotykać: Kliknij ikonę lub opcję, aby ją wybrać.
• Trzepnąć: Przesuń w lewo lub w prawo, aby poruszać się między ekranami lub menu.
• Powiększanie za pomocą szczypania: Use two fingers to zoom in or out on content, if supported by the application.

Wykonywanie połączenia

1. From the home screen, tap the "Call" icon.
2. Enter the contact name, video address, or phone number using the on-screen keyboard.
3. Select the desired contact from the directory or tap the "Call" button to initiate the call.

Udostępnianie treści

1. Tap the "Share" icon on the home screen.
2. Select the source you wish to share (e.g., connected laptop, wireless sharing).
3. Follow the on-screen instructions to begin sharing your content.

Customizing the Interface

The Touch 10 interface can be customized to add or remove buttons and panels, providing control over various aspects of the video system or the conference room environment. This functionality is typically configured through the connected Cisco video conferencing system's administrative interface.

Konserwacja

• Czyszczenie: Użyj miękkiej, niestrzępiącej się ściereczki, lekko wyczyśćampened with water or a non-abrasive screen cleaner to clean the display. Avoid using harsh chemicals or abrasive materials.
• Aktualizacje oprogramowania: Ensure the Touch 10 unit's software is kept up-to-date. Updates are typically managed through the connected Cisco video conferencing system. Refer to your system's documentation for update procedures.
• Warunki środowiskowe: Operate the unit within recommended temperature and humidity ranges to ensure optimal performance and longevity.

Rozwiązywanie problemów

Jednostka nie włącza się

• Verify that the Ethernet cable is securely connected to both the Touch 10 and the video conferencing system/PoE switch.
• Ensure the video conferencing system or PoE switch is powered on and providing power.
• Spróbuj użyć innego kabla Ethernet.

Ekran dotykowy nie reaguje

• Restart the Touch 10 unit by disconnecting and reconnecting the Ethernet cable.
• Upewnij się, że ekran jest czysty i wolny od zanieczyszczeń i wilgoci.
• If the issue persists, check for software updates for the unit and the connected video system.

Cannot Connect to Video System

• Confirm that the Touch 10 and the video system are on the same network and can communicate.
• Sprawdź ustawienia sieciowe i konfigurację zapory.
• Refer to the documentation for your specific Cisco video conferencing system for pairing instructions.

Specyfikacje

Gwarancja i wsparcie

For information regarding warranty coverage, technical support, or service, please refer to the official Cisco documentation or contact your authorized Cisco reseller. Support resources, including knowledge bases and downloads, are typically available on the official Cisco webstrona.

Zasoby internetowe: For the most up-to-date information, user guides, and troubleshooting tips, visit the official Cisco support website. You may need your product's serial number or model number (CS-TOUCH10) for specific support queries.