PERLESMITH Tilt TV Wall Mount Instruction Manual

Ważne informacje dotyczące bezpieczeństwa

Please read all instructions carefully before installation and use. Improper installation or use may result in property damage, serious injury, or death. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.

• Nośność: Do not exceed the maximum load capacity of 60kg (132 lbs). This mount is designed for TVs between 37 and 75 inches.
• Typ ściany: This mount is designed for installation on wood stud walls, solid concrete walls, or brick walls. Do not install on drywall alone.
• Certyfikat bezpieczeństwa UL: PERLESMITH wall mounts are tested to 4 times their maximum load capacity according to American UL safety standards, ensuring durability and earthquake resistance.
• Dzieci i zwierzęta: Securing your TV to the wall is the best way to prevent tip-over, protecting children and pets from potential injury.

Lista kontrolna przed instalacją

Before you begin installation, please verify the following:

• Rozmiar telewizora: Your TV should be between 37 and 75 inches.
• Waga telewizora: The combined weight of your TV and any accessories must not exceed 60kg (132 lbs).
• Zgodność z VESA: Check the VESA mounting pattern on the back of your TV. This mount supports VESA patterns from 200x100mm up to 600x400mm.
• Typ ściany: Confirm your wall is a wood stud, concrete, or brick wall.
• TV Back Profile: If your TV has an uneven back surface, use the included spacers to create a flat mounting area and facilitate cable management.

Instrukcja instalacji

The PERLESMITH TV wall mount is designed for easy installation. Follow these steps for a secure setup.

Krok 1: Sprawdź zawartość opakowania

Unpack all components and verify that all parts are present according to the included parts list. If any parts are missing or damaged, please contact customer support.

Krok 2: Przymocuj wsporniki do telewizora

Carefully place your TV face down on a soft, clean surface. Attach the vertical TV brackets to the back of your TV using the appropriate screws and spacers (if needed) that match your TV's VESA pattern. Ensure the brackets are securely fastened and level.

Krok 3: Zamontuj płytę ścienną

Determine the desired height for your TV. Using a stud finder, locate the wood studs in your wall (for wood stud installation) or mark the drilling points for concrete/brick walls. Drill pilot holes and securely fasten the wall plate to the wall using the provided lag bolts and washers. Ensure the wall plate is perfectly level.

Krok 4: Zawieś telewizor na uchwycie ściennym

With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is properly seated and centered on the wall plate.

Step 5: Secure TV and Adjust Tilt

Once the TV is hung, engage the security locks on the bottom of the TV brackets to prevent accidental dislodgement. This mount features a convenient wire release system for tilt adjustment. Pull the release wires to adjust the TV's downward tilt angle (up to 7 degrees) for optimal viewing. Release the wires to lock the tilt in place.

Instrukcja obsługi

This PERLESMITH wall mount allows for easy tilt adjustment to optimize your viewzdobywania doświadczenia.

Regulacja kąta nachylenia

To adjust the tilt angle, simply pull the wire release cords located at the bottom of the TV brackets. This will disengage the tilt lock, allowing you to manually adjust the TV's angle downwards by up to 7 degrees. Once the desired angle is achieved, release the cords to re-engage the lock. The tilt range may vary slightly depending on your TV size.

Konserwacja

Regularna konserwacja pomaga zapewnić długowieczność i bezpieczne działanie uchwytu ściennego do telewizora.

• Czyszczenie: Przetrzyj uchwyt miękką, suchą ściereczką. Nie używaj środków czyszczących ani rozpuszczalników o działaniu ściernym.
• Kontrole okresowe: Periodically check all screws and connections to ensure they are tight and secure. Over time, vibrations or movement may cause fasteners to loosen.
• Zarządzanie kablami: Utilize the included cable holders to keep wiring neat and organized, preventing strain on cables and ports.

Rozwiązywanie problemów

Jeśli w trakcie lub po instalacji napotkasz jakiekolwiek problemy, zapoznaj się z poniższymi typowymi problemami i ich rozwiązaniami:

• Telewizor nie jest wypoziomowany: Ensure the wall plate was installed level. If the wall plate is level, check if the TV brackets are properly aligned on the TV. Minor adjustments can sometimes be made by slightly loosening and re-tightening the bracket screws on the TV.
• Trudności z pochylaniem telewizora: Ensure the wire release cords are fully pulled to disengage the tilt lock. Check for any obstructions behind the TV that might be preventing movement.
• Brakujące części lub uszkodzone podzespoły: Do not proceed with installation. Contact PERLESMITH customer support immediately for replacement parts.
• Telewizja wydaje się niestabilna: Double-check all wall plate and TV bracket connections. Ensure all screws are tightened securely. Verify that the wall type is appropriate and that the mount is installed into studs or solid concrete/brick.

Specyfikacje

Gwarancja i wsparcie

PERLESMITH stands behind the quality of its products.

• 3-letnia gwarancja jakości: All PERLESMITH products come with a three-year quality guarantee service from the date of purchase.
• Obsługa klienta: If you have any questions, concerns, or require assistance with assembly, missing parts, or product issues, please do not hesitate to contact our customer support team. We are committed to providing prompt and helpful service.