TICCI T8VB Vibrating Alarm Watch User Manual

Wstęp

This manual provides comprehensive instructions for the setup, operation, and maintenance of your TICCI T8VB Vibrating Alarm Watch. Designed for clear readability and ease of use, this watch features multiple vibrating alarms, a large digital display, and water resistance, making it ideal for medication reminders, task management, and daily timekeeping.

Informacje dotyczące bezpieczeństwa

• The watch is water-resistant up to 50 meters. However, avoid exposure to hot water (e.g., hot showers, saunas) as this can compromise the water resistance seals.
• Do not attempt to open the watch casing unless performing a battery replacement as instructed. Improper handling may damage the internal components and void the warranty.
• Keep the watch away from strong magnetic fields to prevent interference with timekeeping accuracy.

Produkt ponadview

The TICCI T8VB watch features a large digital display and four control buttons. Refer to the diagrams below for button identification and display elements.

Rycina 1: Przód view of the TICCI T8VB Vibrating Alarm Watch.

Figure 2: Button layout and display indicators. Detailed instructions are provided in the sections below.

Przycisk A: Mode Selection / Backlight
Przycisk B: Set / Adjust Up
Przycisk C: Adjust Down / Start/Stop (Stopwatch/Countdown)
Przycisk D: Zablokuj/Odblokuj

Organizować coś

1. Pierwsze włączenie zasilania / bateria

Your watch comes with a CR2 battery pre-installed. If the display is blank or dim, the battery may need to be activated or replaced. Refer to the "Maintenance" section for battery replacement instructions.

2. Ustawianie czasu i daty

1. From the Time Mode display, press and hold Przycisk B przez około 2 sekundy, aż cyfry godziny zaczną migać. Oznacza to, że jesteś w trybie ustawień.
2. Naciskać Przycisk A to cycle through the settings: Hour → Minute → Year → Month → Date.
3. Używać Przycisk B to increase the flashing value and Przycisk C aby ją zmniejszyć.
4. Po dostosowaniu wszystkich ustawień naciśnij Przycisk B ponownie, aby wyjść z trybu ustawień.
5. To switch between 12-hour and 24-hour format, press Przycisk C while the hour digits are flashing during time setting.

Instrukcja obsługi

1. Wybór trybu

Naciskać Przycisk A wielokrotnie, aby przełączać się między różnymi trybami:

• Tryb czasu: Wyświetla aktualną godzinę, datę i dzień tygodnia.
• Tryb alarmu: Allows setting and managing up to 8 individual alarms.
• Tryb stopera: Do pomiaru czasu wydarzeń.
• Tryb odliczania: For setting a countdown timer.

2. Setting Alarms (8 Vibrating Alarms)

The watch supports 8 independent alarms, each configurable for vibration, sound, or both.

1. Wchodzić Tryb alarmu naciskając Przycisk A aż na wyświetlaczu pojawi się „AL”.
2. Naciśnij i przytrzymaj Przycisk B for approximately 2 seconds until the alarm number (1-8) flashes.
3. Używać Przycisk A to select the alarm you wish to set (A1, A2, A3, etc.).
4. Naciskać Przycisk B to confirm the alarm selection and move to setting the alarm time. The hour digits will flash.
5. Używać Przycisk B aby dostosować godzinę i Przycisk C aby ustawić minuty.
6. Po ustawieniu czasu naciśnij Przycisk A to select the alarm type:
   • OBYDWA: Both sound (beep) and vibration.
   • SOUND ONLY: Only sound (beep).
   • VIBRATION ONLY: Only vibration.
7. Naciskać Przycisk B to save the alarm settings and exit.
8. To turn an alarm ON or OFF, in Alarm Mode, use Przycisk A to select the alarm, then press Przycisk C to toggle its status.

3. Timer odliczający

The countdown timer can be set from 15 minutes up to 24 hours.

1. Wchodzić Tryb odliczania naciskając Przycisk A until "TR" appears on the display.
2. Naciśnij i przytrzymaj Przycisk B for approximately 2 seconds until the hour digits flash.
3. Używać Przycisk B aby dostosować godzinę i Przycisk C to adjust the minute for the countdown duration.
4. Naciskać Przycisk B to save the countdown setting.
5. Naciskać Przycisk C Aby rozpocząć lub wstrzymać odliczanie.
6. When the countdown reaches zero, the watch will alert with the selected alarm type (sound, vibration, or both).

4. Stoper

1. Wchodzić Tryb stopera naciskając Przycisk A aż na wyświetlaczu pojawi się „ST”.
2. Naciskać Przycisk C aby uruchomić stoper.
3. Naciskać Przycisk C ponownie, aby wstrzymać stoper.
4. Podczas pauzy naciśnij Przycisk B aby zresetować stoper do zera.

5. Podświetlenie

Naciskać Przycisk A briefly in any mode to activate the super bright EL backlight for easy vieww warunkach słabego oświetlenia.

Figure 3: Watch display with backlight activated.

6. Funkcja blokady

To prevent accidental changes to settings, the watch includes a lockout feature.

• Do Zamek the watch: Press and hold Przycisk B I Przycisk C simultaneously for about 2 seconds. A "LOCK" icon will appear on the display.
• Do Odblokować the watch: Press and hold Przycisk B I Przycisk C simultaneously for about 2 seconds. The "LOCK" icon will disappear.
• When locked, only the backlight (Button A) can be activated. All other button functions are disabled.

Konserwacja

1. Wodoodporność

The TICCI T8VB watch is rated 50 meters (5 ATM) water-resistant. This means it can withstand splashes, rain, and brief immersion in water. It is suitable for continuous hand washing. However, it is niezalecane for swimming, showering, or diving, especially in hot water, as steam and high temperatures can damage the watch's seals.

2. Czyszczenie

Regularnie czyść zegarek i pasek miękką, miękką szmatką.amp szmatką. Unikaj stosowania silnych środków chemicznych lub materiałów ściernych, które mogą uszkodzić wykończenie lub uszczelnienia.

3. Wymiana baterii

The watch uses one CR2 battery. When the display becomes dim or functions become erratic, it's time to replace the battery. Battery replacement should ideally be performed by a qualified technician to ensure water resistance is maintained. If replacing yourself, carefully open the back cover, replace the battery with a new CR2 battery, and ensure the gasket is properly seated before securely closing the cover.

Rozwiązywanie problemów

• Watch not turning on or display is blank: Check battery. If recently replaced, ensure it's inserted correctly. If old, replace with a new CR2 battery.
• Alarms not sounding/vibrating: Ensure the alarm is set to ON and the correct alarm type (sound, vibration, or both) is selected. Check if the watch is in lockout mode.
• Przyciski nie reagują: The watch may be in lockout mode. Press and hold Przycisk B I Przycisk C simultaneously for 2 seconds to unlock. If still unresponsive, try removing and reinserting the battery to perform a soft reset.
• Timekeeping inaccuracy: If the watch gains or loses significant time, a battery replacement may be needed, or it could indicate an internal issue.
• Woda wewnątrz zegarka: Immediately stop using the watch and seek professional service. Do not attempt to dry it with heat, as this can cause further damage.

Specyfikacje

Rysunek 4: Wymiary zegarka.

Gwarancja i wsparcie

TICCI is committed to product quality and customer satisfaction. If you encounter any issues with your watch, please contact our customer support team. While specific warranty details are not provided in this manual, TICCI generally offers support for product defects. Please retain your proof of purchase for any warranty claims.

For assistance, please refer to the contact information provided with your purchase or visit the official TICCI webstrona.