Wstęp
The Fms 2000mm Beaver V2 is a 6-channel remote control airplane designed for an immersive and enjoyable flight experience. This manual provides essential information for assembly, operation, and maintenance to ensure safe and optimal performance of your aircraft.
Image: The Fms 2000mm Beaver V2 RC Plane, an attractive red scheme aircraft with optional floats.
- Realistic Flight Experience: Features an eye-catching red color scheme, transparent windows, and a realistic cockpit design for an immersive flying experience.
- Wyjątkowa wydajność: Offers excellent controllability and STOL (Short Takeoff and Landing) capabilities, suitable for both training and aerobatic maneuvers.
- Enhanced Playability: Equipped with realistic ailerons, flaps, hollow wing structure, landing lights, navigation lights, and strobe lights for lifelike night flights. Optional floats and a glider tow hook increase versatility.
- All-New Upgrades: Newly designed wheels with ball bearings reduce rolling resistance and withstand tough landing conditions. Oversized tires ensure stable operation on various terrains.
- Convenient Transportation Design: Quick-release connector system for wings and fuselage simplifies storage and transportation.
Konfiguracja i montaż
Follow these steps to assemble your Fms 2000mm Beaver V2 RC Plane. This model is a Plug and Play (PNP) version, meaning it comes with the ESC, motor, and servos pre-installed. You will need to provide your own 6-channel receiver, Li-Po 22.2V 4000mAh battery, and a compatible charger.
- Purchase a 6-channel receiver, a Li-Po 22.2V 4000mAh battery, and a compatible charger.
- Connect the receiver to the plane's control surfaces.
- Install the battery in the oversized battery bay.
- Assemble the plane by screwing together the wings and fuselage.
- The plane is now ready to fly.
Obraz: Szczegółowy view of the wing and fuselage connectors, which eliminate the need for individual servo leads, and the robust metal landing gear designed for durability.
Image: Close-up of the pre-installed LED landing, navigation, and strobe lights, along with the realistic flaps for enhanced slow-speed performance.
Instrukcja obsługi
The Fms 2000mm Beaver V2 is designed for ease of control and offers stable flight characteristics. Familiarize yourself with the controls before your first flight.
- Kontrola przed lotem: Ensure all control surfaces (ailerons, elevator, rudder) move freely and correctly in response to your transmitter inputs. Check battery charge and secure installation.
- Startować: For ground takeoffs, ensure a flat surface. Apply throttle gradually and use rudder for directional control. For hand launches, hold the aircraft firmly, apply full throttle, and gently toss it forward into the wind.
- Kontrola lotów:
- Lotki: Control roll (left/right banking).
- Winda: Steruje kątem nachylenia (nos w górę/w dół).
- Ster: Controls yaw (nose left/right) and steering on the ground.
- Przepustnica: Steruje prędkością silnika i wysokością.
- Klapy: Use flaps for slower flight speeds during takeoff and landing.
- Lądowanie: Approach into the wind. Reduce throttle gradually and use elevator to maintain a gentle descent. Apply a small amount of throttle (around 10%) to maintain propeller rotation and control, rather than cutting it completely, to avoid a sudden dive. Flare gently just above the ground to achieve a smooth touchdown.
Video: FMS 2000mm DH-2 Beaver V2 - Features and Flight. This video demonstrates the aircraft's flight characteristics and key features, including takeoff, maneuvers, and landing.
Konserwacja
Regular maintenance ensures the longevity and safe operation of your Fms 2000mm Beaver V2.
- Kontrola po locie: After each flight, inspect the aircraft for any damage, loose connections, or worn parts. Check the propeller for cracks or chips.
- Czyszczenie: Clean the aircraft body with a soft, dry cloth. Avoid using harsh chemicals that may damage the foam material.
- Pielęgnacja baterii: Always store Li-Po batteries at a storage charge (around 3.8V per cell) when not in use for extended periods. Do not overcharge or over-discharge batteries.
- Kontrola powierzchni sterującej: Periodically check the hinges and linkages of all control surfaces for wear or looseness. Ensure servos operate smoothly.
- Podwozie: Inspect the landing gear for any bends or damage, especially after rough landings. The newly designed wheels with ball bearings are built to withstand tough conditions, but regular checks are still recommended.
Rozwiązywanie problemów
Oto kilka typowych problemów i ich potencjalne rozwiązania:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Samolot nie reaguje na sterowanie. | Unbound receiver, low transmitter/receiver battery, incorrect wiring. | Ensure receiver is bound to transmitter. Check and charge all batteries. Verify all connections are secure. |
| Silnik nie obraca się. | Disconnected motor/ESC, low battery, ESC not armed. | Check motor and ESC connections. Ensure battery is charged. Follow ESC arming procedure (usually throttle to minimum, then advance). |
| Aircraft pulls to one side during takeoff. | Incorrect trim settings, bent landing gear, uneven thrust. | Adjust trim on transmitter. Inspect landing gear for damage. Check propeller balance. |
| Krótki czas lotu. | Akumulator nie jest w pełni naładowany, akumulator jest stary/uszkodzony, latanie jest agresywne. | Ensure battery is fully charged. Replace old batteries. Practice smoother throttle management. |
Specyfikacje
Key technical specifications for the Fms 2000mm Beaver V2 RC Plane:
Image: Detailed specifications table for the Fms 2000mm Beaver V2.
- Nazwa marki: FMS-y
- Nazwa modelu: Beaver V2
- Numer modelu: FMM090P1X
- Rozpiętość skrzydeł: 2000 mm (78 cali)
- Długość całkowita: 1304mm
- Latająca Waga: ~3800g
- Rozmiar silnika: 4285-550KV
- ESC: 60A
- Servo: 17g*6
- Radio: 6 Channel (required, not included)
- CG (Center of Gravity): 70-75 mm
- Rozmiar rekwizytu: 15*9, 2 ostrza
- Zalecany akumulator: 22.2V 4000MAH 25C (required, not included)
- Approx. Flying Duration: 8 minut
- Poziom doświadczenia: Mediator
- Czas montażu: 10 minut
- Obciążenie skrzydła: 71.1 g / dm²
- Obszar skrzydła: 53.4 dm²
- Typ materiału: Piana
- Zawartość zestawu: Motor, Speed Controller, Servos
- Czy baterie są wymagane: Tak (brak w zestawie)
- Czy montaż jest wymagany: Tak
Gwarancja i wsparcie
For any issues or support, please refer to the following information:
- Zasady zwrotu: Na ten produkt obowiązuje 30-dniowa gwarancja zwrotu/wymiany.
- Damaged During Shipping: If your package was damaged during shipping, please contact customer support immediately. Have photos of the damaged product and box ready.
- Incorrect Product Received: If you received the wrong product, keep all packing material and original boxes. The incorrect item will need to be returned (FMS will cover return shipping costs), and the correct item will be shipped once the new, unused product is returned.
- Kontakt: Aby uzyskać dalszą pomoc, odwiedź stronę Sklep FMS na Amazon lub skorzystaj z danych kontaktowych znajdujących się na opakowaniu produktu.