Alerton VLD-362 Visual Logic Display Sensor-Controller User Manual

1. Wprowadzenie

The Alerton VisualLogic Display (VLD) is a communicating sensor-controller combination featuring built-in temperature and humidity sensors. It is designed for common applications such as rooftop units, fan-coil units, and heat pumps. This device offers a cost-effective solution for in-room hotel requirements, providing an easy-to-use interface, a clear digital display, and the ability to switch between Celsius and Fahrenheit. The VLD-362W model includes an integrated wireless receiver for communication with various sensors, detecting occupancy and whether doors or windows are open or closed, and reporting this data to the front-end Building Automation System (BAS).

2. Koniec produktuview

An image showing the Alerton VLD-362 Visual Logic Display Sensor-Controller. The device is white with a green digital display showing 'Inside 72', 'Set To 72', '12:54 pm', and '20% Humidity'. Buttons for 'FAN', 'SYSTEM', 'AUTO', 'SCHED', 'CLOCK', 'SCREEN', and 'MORE' are visible. The brand 'ALERTON' is printed at the bottom.

Główne cechy:

• Communicating sensor-controller combination with built-in temperature and humidity sensor.
• Designed for common applications such as rooftop units, fan-coil units, and heat pumps.
• Cost-effective solution for in-room hotel requirements.
• Easy-to-use interface and clear digital display.
• Celsius/Fahrenheit change-over capability.
• Integrated wireless receiver (VLD-362W model) for communication with occupancy, door, and window sensors.

3. Instrukcje konfiguracji

3.1 Montaż

1. Select a suitable indoor location away from direct sunlight, drafts, or heat sources that could affect temperature readings.
2. Upewnij się, że powierzchnia montażu jest płaska i stabilna.
3. Ostrożnie otwórz urządzenie casing aby uzyskać dostęp do otworów montażowych.
4. Przymocuj urządzenie do ściany za pomocą odpowiednich śrub i kotew.
5. Zamknij casing securely after mounting.

3.2 Okablowanie

1. OSTRZEŻENIE: Ensure all power to the HVAC system and the controller is disconnected before beginning wiring.
2. Refer to the wiring diagram provided with your specific unit for terminal connections.
3. Connect the power supply wires to the designated power terminals.
4. Connect the communication wires (e.g., BACnet MS/TP) to the appropriate communication terminals, ensuring correct polarity.
5. Connect the control wires to the HVAC equipment (e.g., fan, heating, cooling stages) as per the system design.
6. Verify all connections are secure and correctly terminated.

3.3 Początkowe włączenie zasilania

1. Restore power to the HVAC system and the Alerton VLD-362.
2. The display should illuminate and show initial boot-up information.
3. Follow any on-screen prompts for initial configuration, such as date, time, and unit settings (Celsius/Fahrenheit).

4. Instrukcja obsługi

4.1 Nawigacja wyświetlacza

The VLD-362 features a clear digital display with various buttons for navigation and control. The main screen typically shows current indoor temperature, setpoint, time, and humidity.

4.2 Ustawianie temperatury

1. Użyj Up I W dół arrow buttons next to the 'Set To' display to adjust the desired temperature setpoint.
2. Na wyświetlaczu pojawi się nowa wartość nastawy w miarę jej zmiany.

4.3 Wybór trybu systemu

Naciśnij SYSTEM button to cycle through available system modes such as:

• CIEPŁO: Activates heating function.
• FAJNE: Activates cooling function.
• AUTOMATYCZNY: Automatically switches between heating and cooling based on setpoints.
• OFF: Wyłącza system HVAC.

4.4 Wybór trybu wentylatora

Naciśnij FAN button to cycle through fan operation modes:

• AUTOMATYCZNY: Wentylator pracuje tylko wtedy, gdy aktywne jest ogrzewanie lub chłodzenie.
• NA: Wentylator pracuje w sposób ciągły.

4.5 Scheduling (SCHED)

Naciśnij ZAPLANOWANE button to access and modify the programmed schedule. Refer to the on-screen prompts for setting daily or weekly schedules for temperature and system modes.

4.6 Clock and Screen Settings

• Naciskać ZEGAR to adjust the current time and date.
• Naciskać EKRAN to adjust display brightness or contrast settings.

5. Konserwacja

5.1 Czyszczenie urządzenia

• Wipe the exterior of the VLD-362 with a soft, damp płótno.
• Nie należy używać środków czyszczących o działaniu ściernym, rozpuszczalników ani środków chemicznych w sprayu, ponieważ mogą one uszkodzić wyświetlacz lubasing.
• Upewnij się, że do urządzenia nie dostanie się żadna ciecz.

5.2 Sensor Calibration (Advanced)

The temperature and humidity sensors are factory calibrated. If you suspect inaccurate readings, consult a qualified HVAC technician or Alerton support for potential recalibration procedures. Do not attempt to recalibrate without proper tools and knowledge.

5.3 aktualizacji oprogramowania sprzętowego

Periodically check the Alerton official website or consult your system integrator for available firmware updates. Firmware updates can provide performance improvements and new features. Follow the provided instructions carefully when performing updates.

6. Rozwiązywanie Problemów

7. Specyfikacje

8. Gwarancja i wsparcie

Alerton products are designed for reliability and performance. For specific warranty information regarding your VLD-362 Visual Logic Display Sensor-Controller, please refer to the warranty card included with your product or visit the official Alerton website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Alerton customer support or your authorized Alerton dealer. Ensure you have your model number and purchase details ready when contacting support.

Alerton Official Webstrona: www.alerton.com