NEEWER TP77 77-inch Camera Tripod Monopod User Manual

Wstęp

The NEEWER TP77 is a versatile 2-in-1 camera tripod and monopod designed for photographers and videographers. Constructed from lightweight aluminum alloy, it offers stability and flexibility for various shooting scenarios, supporting DSLRs, mirrorless cameras, and smartphones. Key features include a 360° panoramic ball head, a 2-axis center column for extended height and macro photography, and quick-release leg locks for rapid setup.

Image: The NEEWER TP77 Tripod Monopod set up with a camera, showcasing its lightweight yet sturdy design and compatibility with various devices.

Co jest w pudełku

• 1x TP77 Tripod (with pre-attached ball head)
• 1x Quick Release Plate
• 1x L Shaped Hex Key
• 1x Torba transportowa
• 1x Instrukcja obsługi

Image: Contents of the NEEWER TP77 package, including the tripod, quick release plate, hex key, carrying bag, and user manual.

Instrukcje konfiguracji

1. Rozkładanie statywu:

   Gently pull the tripod legs outwards until they lock into one of the three available angle positions (20°, 50°, or 80°). Ensure all leg locks are securely fastened.

   

   Image: The NEEWER TP77 tripod with its legs extended and locked into position, demonstrating its stability and adjustable angles.

2. Regulacja wysokości nóg:

   Each leg features quick-pull flip-type locking buckles. Open the buckles, extend the leg sections to the desired height, and then firmly close the buckles to secure them. The tripod can extend from 19 inches to 77 inches.

3. Podłączanie kamery:

   Ensure the quick release plate is securely attached to your camera's tripod mount. Align the plate with the receiver on the ball head and slide it in until it clicks into place. Tighten the locking knob on the ball head to prevent accidental release.

   Video: A seller-provided video demonstrating the setup of the NEEWER TP77 tripod, including attaching a camera and converting to a monopod.

Instrukcja obsługi

Panoramiczna głowica kulowa 360 °

The 36mm ball head allows for precise camera positioning. It features two independent control knobs:

• Główne pokrętło blokujące: Controls the movement of the ball, allowing for tilt and swivel adjustments. Loosen to adjust, tighten to lock.
• Panoramiczna gałka podstawy: Controls the 360° rotation of the base for panoramic shots. Loosen to rotate, tighten to lock.

Image: The NEEWER TP77 tripod's ball head, illustrating its 360° panoramic rotation and various camera angles (flat, vertical, elevated, overhead).

Monopod Conversion

One of the tripod legs can be detached and combined with the center column to form a monopod. This provides flexibility for shooting in confined spaces or when quick mobility is required.

1. Odkręć nogę z uchwytem piankowym od korpusu statywu.
2. Unscrew the center column from the tripod body.
3. Attach the detached leg to the bottom of the center column.
4. The monopod height is adjustable from 35 inches to 70 inches.

Image: Visual guide demonstrating the conversion of the NEEWER TP77 tripod into a monopod, showing the detachable leg and center column assembly.

Low Angle and Macro Shooting

For extreme low-angle shots or macro photography, the center column can be inverted.

1. Unscrew the hook at the bottom of the center column and remove the center axis.
2. Re-insert the center column upside down and tighten it securely.
3. Attach your camera to the inverted center column.

Image: The NEEWER TP77 tripod configured for low-angle shooting, with the center column inverted for macro photography.

Korzystanie z uchwytu telefonu

The included phone holder allows for seamless switching between horizontal and vertical smartphone shooting. Attach the phone holder to the quick release plate or directly to the ball head.