Wstęp
This manual provides detailed instructions for the safe and proper installation and operation of your PERLESMITH Full Motion TV Wall Mount, Model PSSFK1. Designed for 13-42 inch televisions, this mount offers flexible viewing angles and a secure installation. Please read all instructions carefully before installation.
Obraz: Ponadview of the PERLESMITH Full Motion TV Wall Mount, highlighting its design and functionality.
Informacje dotyczące bezpieczeństwa
To ensure safe installation and operation, please observe the following:
- This product is designed for installation on wood stud walls, concrete walls, and brick walls. Do not install on drywall alone.
- Ensure the wall structure can support the combined weight of the mount and your television. The maximum load capacity is 20kg (44 lbs).
- Verify your TV's VESA pattern is compatible (75x75mm, 100x100mm, 200x100mm, 200x200mm). Not compatible with 100x200mm VESA.
- Always use the provided hardware. If your TV requires different screws, consult your TV's manual.
- If you are unsure about any part of the installation, seek professional assistance.
- Trzymaj dzieci i zwierzęta domowe z dala od miejsca instalacji.
Image: Illustrates common issues with TV stands such as clutter and potential tip-over risks, emphasizing the safety benefits of wall mounting.
Lista kontrolna przed instalacją
Przed rozpoczęciem instalacji należy sprawdzić następujące kwestie:
- Your TV size is between 13 and 42 inches.
- The total weight of your TV and any accessories is within 20kg (44 lbs).
- Your TV's VESA mounting pattern is one of the following: 75x75mm, 100x100mm, 200x100mm, or 200x200mm. (Note: 100x200mm VESA is not compatible).
- Your wall type is suitable for mounting: wood stud, concrete, or brick.
- If your TV has an uneven back surface, ensure you use the included spacers to create a flat mounting area and facilitate cable management.
Image: Visual guide for checking TV size (13-42 inches), weight capacity (20kg), and compatible VESA patterns (75-200mm vertically and horizontally).
Zawartość opakowania
Please verify that all parts are present before proceeding with installation. Refer to the instruction manual diagram for a complete list of components.
Obraz: Szczegółowy view of the wall mount components, including the wall plate, articulating arm, and TV plate, with key dimensions.
Specyfikacje
| Funkcja | Specyfikacja |
|---|---|
| Marka | PERLESMIT |
| Numer modelu | PSSFK1 |
| Kompatybilne rozmiary telewizorów | 13 - 42 cali |
| Maksymalna ładowność | 20 kg (44 funta) |
| Zgodność ze standardem VESA | 75x75mm, 100x100mm, 200x100mm, 200x200mm |
| Wall Distance Adjustment | 40.5 mm - 406 mm (1.6 - 16 cale) |
| Kąt nachylenia | W górę 5°, w dół 15° |
| Swivel Angle (Wall Plate) | ±90° |
| Rotation (TV Plate) | 360° |
| Tworzywo | Stal walcowana na zimno |
| Kolor | Czarny |
Konfiguracja i instalacja
Follow these steps for a secure installation. It is recommended to have two people for installation.
- Step 1: Attach VESA Plate to TV. Carefully place your TV face down on a soft, clean surface. Align the VESA plate with the mounting holes on the back of your TV. Secure it using the appropriate screws and spacers (if needed) from the provided hardware kit.
- Step 2: Mount Wall Plate to Wall. Locate a suitable mounting position on your wall. Use a stud finder for wood stud walls. For concrete or brick walls, use a masonry drill bit and anchors. Mark the drill holes and securely screw the wall plate to the wall. Ensure it is level.
- Step 3: Hang TV onto Wall Plate. With assistance, carefully lift the TV (with the VESA plate attached) and hook it onto the wall plate. Ensure the TV is securely seated on the wall mount.
- Step 4: Secure TV to Mount. Tighten any safety screws or locking mechanisms to prevent the TV from accidentally dislodging from the mount.
Image: Visual representation of the installation process, showing attaching the bracket to the TV, mounting the base to the wall, and hanging the TV onto the base.
Obsługa i regulacje
This full motion mount allows for various adjustments to achieve optimal viewkąty.
- Regulacja nachylenia: The TV plate can be tilted up 5 degrees and down 15 degrees. Loosen the tilt knobs, adjust to the desired angle, and re-tighten.
- Regulacja obrotu: The arm can swivel up to 90 degrees left or right from the wall plate. The TV plate itself can rotate 360 degrees. Gently push or pull the TV to the desired horizontal position.
- Wydłużenie/Cofnięcie: The arm allows the TV to extend from 40.5mm to 406mm (1.6 to 16 inches) from the wall.
Note: The actual range of motion may vary depending on the size of your television.
Image: Demonstrates the various adjustable angles: up/down tilt (+5°/-15°), left/right swivel (±3°), arm articulation (±90°), and wall distance adjustment (40.5mm-406mm).
Konserwacja
Regularna konserwacja zapewnia długowieczność i bezpieczne działanie uchwytu ściennego do telewizora.
- Okresowo sprawdzaj wszystkie śruby i nakrętki, aby mieć pewność, że są dobrze dokręcone i bezpieczne.
- Czyść uchwyt miękką, suchą ściereczką. Unikaj środków czyszczących o właściwościach ściernych i rozpuszczalników.
- Inspect the mount for any signs of wear, damage, or corrosion. If any issues are found, contact customer support.
- Ensure cables are properly managed using the included cable holders to prevent strain or damage.
Rozwiązywanie problemów
Jeśli napotkasz jakiekolwiek problemy, zapoznaj się z poniższymi typowymi problemami i rozwiązaniami:
- Telewizor nie jest wypoziomowany: Check the wall plate installation to ensure it is perfectly level. Some mounts allow for minor post-installation leveling adjustments; refer to the specific mechanism on your mount.
- Mocowanie wydaje się luźne: Re-tighten all mounting screws on both the wall plate and the TV plate. Ensure the wall type is appropriate and the anchors (if used) are correctly installed.
- Trudności z regulacją kąta: Check for any tightened locking mechanisms. Ensure no cables are obstructing movement. If the TV is at the maximum weight capacity, adjustments might require more effort.
- Brakujące części: Refer to the package contents list. If parts are missing, contact customer support immediately.
Gwarancja i wsparcie
PERLESMITH provides a three-year quality guarantee service from the date of purchase for all its products.
In case of initial defects, missing parts, or damage during delivery, we will provide return or exchange services. If you have any problems or questions regarding assembly or product operation, please do not hesitate to contact us.
For customer support, please visit the PERLESMITH store on Amazon or contact the seller directly through your order details.