KeylessOption EZSDEI7141 474V

KeylessOption Keyless Entry Remote Starter Car Key Fob User Manual

Model: EZSDEI7141 474V

Wstęp

This manual provides comprehensive instructions for the KeylessOption Keyless Entry Remote Starter Car Key Fob. This remote is designed as a replacement for aftermarket Viper alarm and remote start systems. Ensure your original remote's FCC ID matches EZSDEI7141 for compatibility.

Przód view of the KeylessOption Key Fob with lock, unlock, AUX, and star buttons.

Obraz: Przód view of the KeylessOption Key Fob, displaying the lock, unlock, AUX, and star buttons.

Konfiguracja i programowanie

Programming this remote requires locating the Viper system's control button, often found near the rearview mirror, under the dashboard, or in other discreet locations depending on the installation. Refer to your vehicle's specific Viper system manual or consult a professional if you cannot locate it.

Kroki programowania:

  1. Open the driver's side door of your vehicle.
  2. Insert the key into the ignition and turn it to the ON position. Do not start the engine.
  3. Locate the Viper system's control button (often a small button with a blue LED indicator).
  4. Naciśnij przycisk sterowania siedem razy. Na eighth press, hold the button down until the car chirps.
  5. While still holding the control button, press the Zamek button on your new KeylessOption remote. The car should chirp again to confirm successful programming.
  6. Zwolnij przycisk sterowania.
  7. Przekręć kluczyk w stacyjce w pozycję WYŁĄCZONY pozycję i usuń ją.
  8. Close the driver's side door.
  9. Test the remote's functions (Lock, Unlock, etc.) to ensure proper operation.

If you are programming multiple remotes, repeat steps 4 and 5 for each additional remote before turning the key off in step 6.

Wideo: Krótki przeglądview of KeylessOption Key Fob Remotes for Viper systems.

Instrukcja obsługi

Once programmed, your KeylessOption remote provides convenient control over your vehicle's aftermarket alarm and remote start system. The remote features four distinct buttons:

Kątowy view of the KeylessOption Key Fob, showing the side profile i układ przycisków.

Obraz: kątowy view of the KeylessOption Key Fob, highlighting its ergonomic design.

Konserwacja

Wymiana baterii:

If your remote's range decreases or it stops responding, the battery may need replacement. The KeylessOption remote uses a standard coin cell battery (e.g., CR2032, check inside the remote for exact type). To replace:

  1. Carefully separate the two halves of the remote casing using a small flat-head screwdriver or a prying tool.
  2. Remove the old battery. Note its orientation (+/- sides).
  3. Włóż nową baterię, zwracając uwagę na prawidłową orientację.
  4. Zatrzaśnij pilota casinz powrotem bezpiecznie razem.
Z powrotem view of the KeylessOption Key Fob, showing the smooth casing.

Obraz: Tył view of the KeylessOption Key Fob, indicating where the casing can be opened for battery access.

Rozwiązywanie problemów

Specyfikacje

MarkaOpcja Keyless
Numer modeluEZSDEI7141 474V
Kompatybilne urządzeniaViper Aftermarket Alarm System
Identyfikator FCCEZSDEI7141
Liczba przycisków4 (Lock, Unlock, Aux, Panic)
Waga przedmiotu0.634 uncji
Wymiary opakowania6.77 x 4.65 x 0.47 cala

Gwarancja i wsparcie

Each KeylessOption remote includes a warranty card. KeylessOption is an automotive remote company dedicated to providing reliable replacement automotive products. For further assistance or warranty claims, please refer to the contact information provided on your warranty card or visit the official KeylessOption webstrona.

KeylessOption Warranty Card

Image: KeylessOption Warranty Card, included with each purchase.