GARAGE STOP G3T-BX/G3T-R 3-Button Remote Instruction Manual

1. Wprowadzenie i koniecview

The GARAGE STOP G3T-BX/G3T-R 3-Button Remote is a high-quality replacement garage door opener remote designed for convenient and secure access to your garage. This remote is engineered to be compatible with a wide range of Genie IntelliCode and Overhead Door CodeDodger systems, offering a reliable and cost-effective solution for your garage access needs.

Image: Two GARAGE STOP G3T-BX/G3T-R 3-Button Remotes, showing their compact design and three black control buttons on a grey casing.

2. Funkcje produktu

• Szeroka kompatybilność: Works with all Overhead Door CodeDodger and Genie IntelliCode garage door opener remotes (1997 to present). Note: Not compatible with dip switches.
• Zaawansowane zabezpieczenia: Features CodeDodger technology with auto-seek capabilities, responding to both 315 MHz and 390 MHz frequencies to mitigate interference.
• Multi-Door Control: Capable of operating up to 3 individual garage door openers.
• Rozszerzony zasięg: Offers a long-distance operating range of up to 120 feet for convenient access.
• Przyjazny dla użytkownika projekt: Sleek, compact device equipped with large, easy-to-access buttons.
• Wygodna przenośność: Includes a visor clip for easy attachment to your car's sun visor, allowing for quick access from the driver's seat.
• Gotowy do użycia: Comes with a pre-installed CR2032 lithium battery.

Image: An infographic highlighting the key features of the remote, including broad compatibility, multi-door control, advanced security, and long-range operation.

3. Zawartość opakowania

Your GARAGE STOP remote package includes the following items:

• 2 x GARAGE STOP G3T-BX/G3T-R 3-Button Remotes
• 2 x CR2032 Lithium Batteries (pre-installed in remotes)
• 2 x Visor Clips
• 1 x Programming Guide (printed instructions)

Image: A visual representation of the package contents, including the two remotes, visor clips, and batteries.

4. Zgodność

This remote is designed for compatibility with specific garage door opener systems. Please verify your opener's compatibility before proceeding with programming.

• Kompatybilny z: All Overhead Door CodeDodger and Genie IntelliCode garage door opener remotes manufactured from 1997 to present.
• Specifically Compatible Models: G3T-BX, G3T-R, G3T-A, G1T-BX, G1T-A, O1T-BX, O1T-A, GITR-3, GIT-1, GIT-2, GIT-3, O3T-BX, OCDTR-3, OCDT-1, OCDT-2, OCDT-3.
• Ważna uwaga: This remote is NOT compatible with garage door openers that use dip switches for programming.

Image: A visual guide illustrating the broad compatibility of the remote with Genie IntelliCode and Overhead Door systems.

5. Konfiguracja i programowanie

Follow these instructions carefully to program your GARAGE STOP remote to your garage door opener. There are two primary methods depending on your opener's button type.

Video Guide: How to Program Garage Stop G3T-BX

Programming with Learn Button (1995 to present)

1. Krok 1: Press and then release the "Learn Code" button on the OPENER unit hanging in your garage. The LED on the opener will blink rapidly.
2. Krok 2: Press the button you wish to program on the remote transmitter. The LED on the opener will stop blinking.
3. Krok 3: Press the same button on the remote transmitter again. The LED on the opener will go out.
4. Krok 4: Press the same button on the remote one more time. The garage door should open, indicating successful programming.

Programming with Program/Set Button (2010 to present)

1. Krok 1: Locate the Program/Set Button and the Indicator LED on the OPENER unit hanging in your garage.
2. Krok 2: Hold the Program/Set Button until the LED turns blue, then release. The LED will then blink purple.
3. Krok 3: Press the button you wish to program on the remote transmitter. The LED will stop blinking.
4. Krok 4: Press the same button on the remote transmitter again. The LEDs will turn off after blinking blue.
5. Krok 5: Press the same button on the remote one more time. The garage door should open, indicating successful programming.

**Repeat the steps above if you wish to program multiple remotes or a multi-button remote to multiple doors. If a remote loses its "program", repeat the steps above.

Image: A visual guide detailing the programming steps for both 'Learn Button' and 'Program/Set Button' garage door openers.

6. Instrukcja obsługi

Once programmed, operating your GARAGE STOP remote is straightforward:

• Otwieranie/zamykanie bramy garażowej: Press the desired programmed button on the remote to activate your garage door opener. The door will open or close accordingly.
• Drzwi wielokrotne: If you have programmed multiple buttons for different garage doors, simply press the corresponding button for the door you wish to operate.
• Zakres: For optimal performance, ensure you are within the 120-foot operating range of your garage door opener.

7. Konserwacja

Wymiana baterii

The remote uses a CR2032 lithium battery. If the remote's indicator light does not illuminate or its range decreases significantly, it may be time to replace the battery.

1. Krok 1: Open the remote case using a small coin or flat-head screwdriver. Insert it into the slot at the top of the remote and gently pry it open.
2. Krok 2: Remove the old CR2032 battery. Note the polarity (+/-) before removal.
3. Krok 3: Insert a new CR2032 lithium battery, ensuring the correct polarity.
4. Krok 4: Align the components and snap the case closed until it clicks securely.

Image: A diagram illustrating the steps for replacing the battery in the remote control.

8. Rozwiązywanie Problemów

If you encounter issues with your GARAGE STOP remote, consider the following common solutions:

• Remote Not Programming:
  • Ensure your garage door opener is compatible with the remote (check compatibility list in Section 4).
  • Verify that you are pressing the correct "Learn" or "Program/Set" button on your garage door opener.
  • Confirm that the remote's battery is properly installed and has sufficient charge.
  • Ensure you are following the programming steps precisely as outlined in Section 5.
• Remote Not Activating Door:
  • Check the remote's battery (see Section 7 for replacement).
  • Upewnij się, że znajdujesz się w efektywnym zasięgu działania (około 120 stóp).
  • Confirm that the remote is properly programmed to your opener. If unsure, re-program the remote (see Section 5).
  • Check for any obstructions or interference between the remote and the garage door opener.
• Erasing All Remotes from Opener Memory (Lost or Stolen Remote):

  To erase all remote codes from your opener's memory (useful if a remote is lost or stolen), follow these steps:

  1. Krok 1: Press and hold the Learn Code button on the opener for 10 seconds or until the Radio Signal LED indicator goes out. This will erase all previously programmed remotes.
  2. Krok 2: Reprogram any remaining remotes you wish to use by following the programming instructions in Section 5.

9. Specyfikacje

10. Gwarancja i obsługa klienta

At GARAGE STOP, customer satisfaction is our primary focus. We are committed to providing high-quality, budget-friendly alternatives to OEM products. Each product undergoes thorough testing to ensure optimal quality and reliability.

If you are not entirely satisfied with your purchase or require assistance with programming, troubleshooting, or any other product-related inquiry, please do not hesitate to contact our customer support team for immediate assistance. We are here to help ensure your complete satisfaction.

Aby uzyskać pomoc, odwiedź stronę GARAGE STOP Store on Amazon lub skorzystaj z danych kontaktowych znajdujących się na opakowaniu produktu.