Graham-Field Everest & Jennings Advantage LX Wheelchair Instruction Manual

Wstęp

This instruction manual provides essential information for the safe and effective use, setup, and maintenance of your Graham-Field Everest & Jennings Advantage LX Wheelchair. Please read this manual thoroughly before operating the wheelchair and retain it for future reference. Proper understanding and adherence to these instructions will ensure optimal performance and user safety.

Główne cechy

• Trwała konstrukcja: Features a carbon steel frame with a silvervein hammertone finish for enhanced durability and scratch resistance.
• Wygodne siedzenia: Equipped with black padded nylon upholstery for comfort and ease of cleaning.
• Adjustable Legrests: Includes tool-free adjustable footrests or elevating legrests with black composite footplates.
• Wyściełane podłokietniki: Available with detachable desk arms or full-length padded arms for user comfort.
• Wygodne przechowywanie: Features a standard chart pocket on the seat back for personal items.
• Nośność: Supports a maximum weight capacity of 300 pounds, evenly distributed.
• Wymiary siedziska: Available in 16, 18, and 20-inch seat widths with a 16-inch seat depth.

Instrukcje konfiguracji

1. Rozpakowanie i wstępna kontrola

Carefully remove the wheelchair from its packaging. Inspect all components for any signs of damage that may have occurred during shipping. If any damage is found, do not proceed with assembly or use, and contact customer support immediately.

2. Rozkładanie wózka inwalidzkiego

1. Złożony wózek inwalidzki należy umieścić na płaskiej i stabilnej powierzchni.
2. Grasp the handgrips and gently pull them apart to begin unfolding the frame.
3. Dociśnij szyny siedziska, aż siedzisko będzie całkowicie rozłożone i płaskie. Upewnij się, że poprzeczki są całkowicie wysunięte i zablokowane.

Image: The Everest & Jennings Advantage LX Wheelchair in its fully unfolded state, ready for use.

3. Attaching and Adjusting Footrests/Legrests

1. Align the footrest/legrest attachment pins with the corresponding receptacles on the wheelchair frame.
2. Push the footrest/legrest firmly into place until it locks securely.
3. To adjust the height of the footplates, locate the adjustment pins on the legrest extension. Press the pin and slide the footplate assembly up or down to the desired height. Ensure both footplates are at an equal height.
4. For elevating legrests, use the lever to adjust the angle of the legrest for optimal comfort and support.

Obraz: szczegółowy view of the wheelchair's elevating legrests and footplates, highlighting their adjustability.

Instrukcja obsługi

1. Transferring to and from the Wheelchair

Ensure the wheelchair brakes are engaged before attempting any transfer. Position the wheelchair as close as possible to the transfer surface. If equipped, swing away or remove the footrests/legrests to clear the path. Use proper transfer techniques or seek assistance as needed.

2. Propelling the Wheelchair

To move the wheelchair, grasp the handrims on the large rear wheels and push forward or backward. For assistance, a caregiver can push the wheelchair using the push handles on the backrest.

3. Engaging and Disengaging Brakes

To engage the brakes, push the brake levers forward until they lock against the tires. To disengage, pull the levers backward. Always ensure brakes are fully engaged when stationary to prevent unintended movement.

4. Folding the Wheelchair for Transport or Storage

1. Engage both wheel brakes.
2. Remove the footrests/legrests by pulling the release lever and swinging them out, then lifting them off.
3. Grasp the center of the seat upholstery, typically near the front and back edges, and pull upwards. The wheelchair frame will begin to fold inward.
4. Kontynuuj ciągnięcie, aż wózek inwalidzki zostanie całkowicie złożony.

Obraz: Bok view of the Everest & Jennings Advantage LX Wheelchair in its compact, folded configuration.

Obraz: Przód view of the Everest & Jennings Advantage LX Wheelchair in its compact, folded configuration.

Konserwacja

Regular maintenance is crucial for the longevity and safe operation of your wheelchair.

1. Czyszczenie

• Rama: Przetrzyj ramkę reklamąamp Ściereczką i łagodnym detergentem. Dokładnie wysuszyć. Unikać środków czyszczących o działaniu ściernym.
• Tapicerka: Clean the nylon upholstery with a mild soap and water solution. Rinse and air dry completely.
• Koła i opony: Keep wheels and tires free of dirt and debris. Inspect tires for wear and proper inflation (if pneumatic).

2. Harmonogram inspekcji

• Codziennie: Check brakes for proper function. Ensure all quick-release axles (if applicable) are securely locked.
• Tygodnik: Inspect tires for wear and damage. Check all nuts and bolts for tightness. Ensure footrests/legrests attach and detach smoothly.
• Miesięczny: Lubricate moving parts as recommended by a qualified technician. Inspect the frame for cracks or bends.

Obraz: Zbliżenie view of the rear wheel axle and its connection to the wheelchair frame, illustrating a key area for maintenance inspection.

Rozwiązywanie problemów

W tej sekcji omówiono typowe problemy, jakie mogą wystąpić podczas korzystania z wózka inwalidzkiego.

• Brakes not holding: Check if the brake pads are making full contact with the tires. Adjust the brake mechanism if necessary, or consult a technician.
• Koła nie obracają się płynnie: Inspect for debris caught in the axles or bearings. Ensure wheels are properly aligned and lubricated.
• Footrests/Legrests are loose: Verify that the attachment pins are fully engaged. Tighten any visible fasteners if they appear loose.
• Piszczące dźwięki: Identify the source of the squeak. Often, lubrication of moving parts (e.g., folding mechanisms, axles) can resolve this.

If you experience persistent issues or problems not listed here, please contact customer support.

Specyfikacje

Zawartość pudełka:

• Everest & Jennings Advantage LX Wheelchair

Image: An overhead perspective of the wheelchair seat, illustrating the available 20-inch width and 16-inch depth dimensions.

Gwarancja i wsparcie

For warranty information, please refer to the documentation included with your purchase or contact Graham-Field directly. For technical support, parts, or service inquiries, please reach out to the manufacturer.

Dane kontaktowe producenta:

• Telefon: 1-678-291-3207
• Marka Webstrona: Visit the Graham-Field Store on Amazon