Xiaomi Mi Cordless Screwdriver 3.6V User Manual

1. Koniec produktuview

The Xiaomi Mi Cordless Screwdriver 3.6V is a portable and powerful tool designed for various household tasks, including assembling furniture, installing light fixtures, and working with electronics. It features a strong magnetic motor, a high-capacity rechargeable battery, and a set of S2 steel bits.

Figure 1.1: Xiaomi Mi Cordless Screwdriver and its accessories.

Główne cechy:

• Mocny silnik magnetyczny: Delivers up to 5 N.m of torque for efficient screwing and unscrewing.
• Bezprzewodowe i przenośne: Equipped with a 2000mAh rechargeable battery and USB-C charging for convenience.
• High-Quality Bits: Includes 12 S2 alloy steel bits and a 60mm extension rod for various applications.
• One-piece Body Design: Patented screw-free design for durability and comfortable grip.
• Innovative Dial: Three-shift dial for easy one-handed operation (screw in, screw out, lock).
• Zintegrowane oświetlenie LED: Three LEDs form a circular light strip for illumination in dim environments.

Figure 1.2: The screwdriver, bit set, and carrying case.

2. Konfiguracja

2.1 Ładowanie śrubokręta

Before first use, fully charge the screwdriver. The device is equipped with a 2000mAh lithium-ion battery and charges via a USB-C port.

1. Znajdź port ładowania USB-C na śrubokręcie.
2. Connect the provided USB-C charging cable to the screwdriver.
3. Podłącz drugi koniec kabla do kompatybilnego zasilacza USB (nie ma go w zestawie) lub do portu USB.
4. The charging indicator will illuminate. Charging typically takes 120-180 minutes for a full charge.
5. Po całkowitym naładowaniu odłącz kabel ładujący.

Rysunek 2.1: Wewnętrzne view highlighting the 2000mAh battery.

2.2 Instalowanie bitów

The screwdriver uses standard 1/4-inch hex shank bits. An extension rod is also included for hard-to-reach areas.

1. Select the appropriate S2 steel bit for your task from the included set.
2. If needed, insert the 60mm extension rod into the screwdriver's magnetic chuck until it clicks into place.
3. Insert the selected bit firmly into the magnetic chuck of the screwdriver or the extension rod. The magnetic chuck will hold the bit securely.
4. Aby wyjąć bit, po prostu go wyciągnij.

3. Instrukcja obsługi

3.1 Włączanie i wyłączanie zasilania

The screwdriver is activated by pressing the main trigger button. There is no separate power on/off switch.

3.2 Using the Direction Dial

The innovative three-shift dial located at the rear of the screwdriver controls the rotation direction and locks the tool.

Figure 3.1: The three-shift dial for operation.

• 'L' Position (Screw Out): Rotate the dial to 'L' to set the screwdriver to rotate counter-clockwise, used for loosening or unscrewing fasteners.
• Center Position (Locking): Rotate the dial to the center position (indicated by a dot) to lock the screwdriver. In this position, the trigger will not activate the motor, allowing for manual tightening or loosening if needed, or for safe storage.
• 'R' Position (Screw In): Rotate the dial to 'R' to set the screwdriver to rotate clockwise, used for tightening or screwing in fasteners.

3.3 Aktywacja świateł LED

The screwdriver features three integrated LED lights around the chuck to illuminate the work area.

Figure 3.2: The integrated LED lights illuminate the work area.

The LED lights automatically turn on when the trigger button is pressed and the screwdriver is in either the 'L' or 'R' position. They will turn off when the trigger is released.

3.4 Ogólne zasady działania

1. Ensure the correct bit is installed and the direction dial is set to 'L' for unscrewing or 'R' for screwing.
2. Place the tip of the bit onto the head of the fastener.
3. Press the trigger button to activate the screwdriver. Apply gentle, steady pressure to the tool.
4. Release the trigger button once the fastener is tightened or loosened to the desired extent.

Figure 3.3: Screwdriver in use on a bicycle.

Figure 3.4: Screwdriver in use assembling furniture.

4. Konserwacja

4.1 Czyszczenie

Regularne czyszczenie pomaga zachować wydajność i trwałość wkrętarki.

• Ensure the screwdriver is turned off (dial in center position) and disconnected from any charging cable before cleaning.
• Wipe the exterior of the screwdriver with a soft, damp płótno. Nie używaj ostrych środków chemicznych ani ściernych środków czyszczących.
• Clean any debris from the magnetic chuck and bit holder.
• Utrzymuj otwory wentylacyjne w czystości, bez kurzu i zanieczyszczeń.

4.2 Przechowywanie

Przechowuj śrubokręt i jego akcesoria w suchym i chłodnym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.

• Always store the screwdriver with the direction dial in the center (locked) position to prevent accidental activation.
• Utilize the provided carrying case for organized and protected storage of the screwdriver and bits.
• For long-term storage, ensure the battery is partially charged (around 50%) to preserve battery health. Avoid storing with a completely depleted or fully charged battery for extended periods.

5. Rozwiązywanie Problemów

This section addresses common issues you might encounter with your Xiaomi Mi Cordless Screwdriver.

Jeśli po wypróbowaniu tych rozwiązań problem nadal występuje, skontaktuj się z obsługą klienta.

6. Specyfikacje

The following table provides the technical specifications for the Xiaomi Mi Cordless Screwdriver 3.6V.

Figure 6.1: Basic parameters and packing list.

Zawartość opakowania:

• Xiaomi Mi Cordless Screwdriver x 1
• Torba do przechowywania x 1
• Instrukcja obsługi x 1
• Bit Box x 1
• Extension Rod x 1
• Bits x 12
• Kabel ładujący x 1

7. Gwarancja i wsparcie

For warranty information, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. Xiaomi provides customer support for its products.

For additional support or to explore other Xiaomi products, you may visit the official Xiaomi store:

Visit the XIAOMI Store on Amazon

Proszę zachować dowód zakupu na wypadek ewentualnych roszczeń gwarancyjnych.