Wstęp
The Pioneer A-Series TS-A25S4 is a high-performance 10-inch component subwoofer designed to enhance your vehicle's audio system with deep, powerful bass. This subwoofer is engineered to integrate with Pioneer's A-series full-range speakers, providing a balanced and dynamic sound experience. It features a Glass-Fiber & Mica Reinforced IMPP cone for durability and precise bass reproduction. This manual provides essential information for the proper installation, operation, and maintenance of your TS-A25S4 subwoofer.
Informacje dotyczące bezpieczeństwa
Please read all safety instructions before installing or operating this product. Failure to follow these instructions may result in injury or damage to the product or vehicle.
- Połączenia elektryczne: Ensure all wiring is correctly connected and insulated to prevent short circuits and electrical hazards. Disconnect the vehicle's battery before beginning installation.
- Prawidłowa instalacja: Securely mount the subwoofer to prevent it from becoming a projectile in the event of sudden stops or collisions. Consult a professional installer if you are unsure about any aspect of the installation.
- Ochrona słuchu: Prolonged exposure to high volume levels can cause permanent hearing damage. Operate your audio system at moderate levels.
- Wentylacja: Zapewnij odpowiednią wentylację wokół subwoofera i ampfiltr, aby zapobiec przegrzaniu.
Co jest w pudełku
Przed rozpoczęciem instalacji sprawdź, czy wszystkie elementy są obecne:
- 10-inch Component Subwoofer
- 8 śruby montażowe
- Instrukcja obsługi (ten dokument)
- Roczna karta gwarancyjna
Konfiguracja i instalacja
Zalecenia dotyczące obudowy
The TS-A25S4 subwoofer is designed for optimal performance within specific enclosure volumes:
- Wentylowana obudowa: 1.1 cubic feet (cu. ft.)
- Uszczelniona obudowa: 0.8 cubic feet (cu. ft.)
Adhering to these recommendations will ensure the best sound quality and longevity of your subwoofer.
Montowanie
The subwoofer requires a mounting depth of 5.625 inches (144 mm). Ensure sufficient clearance behind the mounting surface. Use the provided mounting screws to secure the subwoofer firmly into the enclosure.

Image: Diagram showing the dimensions of the Pioneer TS-A25S4 subwoofer, including a 10-inch diameter and a 5.625-inch mounting depth.
Okablowanie
The TS-A25S4 features a 4Ω Single Voice Coil (SVC) design, which simplifies wiring. Connect the subwoofer to a compatible external amplifier. Ensure correct polarity (+ to + and - to -) to prevent phase issues and ensure optimal sound reproduction.

Obraz: Przekrój view of the Pioneer A-Series subwoofer, highlighting internal components like the voice coil and magnet structure.

Obraz: widok z góry view of the Pioneer A-Series subwoofer, showcasing stożek i otoczenie.
Instrukcja obsługi
The TS-A25S4 is a passive subwoofer and requires an external amplifier for operation. Connect the subwoofer to an amplifier that can provide 350W nominal power (RMS) at 4Ω for optimal performance. The subwoofer can handle a maximum power of 1200W.
- Amplifier Połączenie: Upewnij się, że amplifier is properly connected and configured according to its own instruction manual.
- Regulacja wzmocnienia: Carefully adjust the gain setting on your amplifier, aby dopasować objętość wyjściowątage of your head unit. Avoid setting the gain too high, as this can lead to distortion and potential damage to the subwoofer.
- Ustawienia crossovera: Użyj filtra dolnoprzepustowego (LPF) na swoim amplifier or head unit to send only low-frequency signals to the subwoofer. A typical crossover point for subwoofers is between 80 Hz and 120 Hz.
- Kontrola fazy: Niektóre amplifiers offer a phase control (0 or 180 degrees). Experiment with this setting to achieve the most cohesive bass response with your other speakers.

Image: Diagram illustrating the power handling capabilities of the Pioneer A-Series subwoofer, showing 1200W Max and 350W Continuous (Nominal) power.

Image: Graphic displaying the 85 dB sensitivity and 22 Hz - 1.4 kHz frequency response of the Pioneer A-Series subwoofer, indicating clear sound at lower power.
Konserwacja
To ensure the longevity and optimal performance of your Pioneer TS-A25S4 subwoofer, follow these simple maintenance guidelines:
- Czyszczenie: Do przecierania membrany i głośnika niskotonowego używaj miękkiej, suchej ściereczki. Unikaj stosowania silnych środków chemicznych i ściernych środków czyszczących.
- Kontrola: Periodically inspect the subwoofer for any signs of damage, such as tears in the cone or surround, or loose connections.
- Czynniki środowiskowe: Chroń subwoofer przed ekstremalnymi temperaturami, bezpośrednim działaniem promieni słonecznych i nadmierną wilgocią.
Rozwiązywanie problemów
Jeśli masz problemy z subwooferem, zapoznaj się z poniższymi typowymi procedurami rozwiązywania problemów:
- Brak dźwięku:
- Check all wiring connections between the subwoofer, amplifier, and head unit. Ensure they are secure and correctly polarized.
- Sprawdź, czy amplifier is powered on and receiving a signal. Check the ampbezpieczniki Lifiera.
- Confirm that the head unit's subwoofer output is enabled and volume is adjusted.
- Zniekształcony dźwięk:
- Zmniejszyć amplifier's gain setting. Overdriving the subwoofer can cause distortion.
- Check the crossover settings to ensure only appropriate low frequencies are sent to the subwoofer.
- Inspect the subwoofer cone and surround for any physical damage.
- Słaby bas:
- Ensure the subwoofer is installed in an enclosure that matches the recommended volume specifications.
- Sprawdź amplifier's power output and ensure it is sufficient for the subwoofer's nominal power rating.
- Adjust the phase control on your amplifier jeśli dostępny.
If these steps do not resolve the issue, please contact Pioneer customer support.
Specyfikacje
| Funkcja | Specyfikacja |
|---|---|
| Marka | PIONIER |
| Numer modelu | TS-A25S4 |
| Typ głośnika | Subwoofer komponentowy |
| Średnica subwoofera | 10 cala (254 mm) |
| Maksymalna moc wyjściowa głośnika | 1200 watów |
| Moc znamionowa (RMS) | 350 watów |
| Impedancja | 4 ohm (Single Voice Coil) |
| Odpowiedź częstotliwościowa | 22 Hz - 1.4 kHz |
| Wrażliwość | 85dB |
| Głębokość montażu | 5.625 cala (144 mm) |
| Zalecana objętość obudowy wentylowanej | 1.1 stóp sześciennych |
| Zalecana objętość obudowy szczelnej | 0.8 stóp sześciennych |
| Materiał obudowy | Rubber (Surround) |
| Waga przedmiotu | 2 funta |
| GTIN / UPC | 884938446563 |
Informacje o gwarancji
This Pioneer TS-A25S4 subwoofer comes with a 1 rok ograniczonej gwarancji. Please refer to the included Warranty Sheet for detailed terms and conditions, including coverage, limitations, and how to make a claim. Keep your proof of purchase for warranty service.
Obsługa klienta
For further assistance, technical support, or warranty inquiries, please contact Pioneer customer service. You can find contact information on the official Pioneer website or on your warranty sheet.
Zasoby internetowe: Odwiedź oficjalną stronę Pioneer website for product registration, FAQs, and additional support documents.
Informacje kontaktowe: Refer to your warranty documentation or the Pioneer webwitryna zawierająca najbardziej aktualne dane kontaktowe dla Twojego regionu.