Wstęp
Thank you for choosing the Parkside PRM 1800 A1 Electric Lawn Mower. This manual provides essential information for the safe and efficient operation, assembly, maintenance, and troubleshooting of your new lawn mower. Please read these instructions carefully before use and keep them for future reference.
The Parkside PRM 1800 A1 features an 1800W Turbo Power motor, a 44 cm cutting width, and a centralized 6-level cutting height adjustment from 20 to 70 mm. It includes a large 55-liter grass collection bag with a level indicator and a comfortable, height-adjustable handle with Softgrip. Its lightweight design and robust, impact-resistant plastic housing ensure good maneuverability and durability.

Image: The Parkside PRM 1800 A1 Electric Lawn Mower, showcasing its green and black design with the grass collection bag attached.
Instrukcje konfiguracji
1. Rozpakowanie i kontrola
- Ostrożnie wyjąć wszystkie elementy z opakowania.
- Inspect all parts for any damage. Do not use the product if any parts are damaged.
- Sprawdź, czy wszystkie wymienione komponenty są obecne.
2. Montaż uchwytu
- Attach the lower handle bars to the main unit using the provided fasteners.
- Connect the upper handle section, ensuring the ergonomic Softgrip handle is correctly oriented.
- Secure the handle sections using the quick-release folding function for a firm connection. Adjust the handle height to a comfortable operating position.

Obraz: Zbliżenie view of the comfortable, height-adjustable handle with ergonomic Softgrip and control levers.
3. Przystawka do zbierania trawy
- Assemble the 55-liter grass collection bag according to the instructions provided with the bag itself.
- Podnieś tylną klapę kosiarki.
- Hook the grass collection bag onto the designated mounts at the rear of the mower. Ensure it is securely seated to prevent grass clippings from escaping.
Instrukcja obsługi
1. Podłączanie do zasilania
- Upewnij się, że wyłącznik zasilania jest w pozycji „WYŁ”.
- Connect the power cable to a suitable outdoor extension cord, and then plug it into a grounded electrical outlet.
- Always use an extension cord suitable for outdoor use and rated for the mower's power requirements (1800W).
2. Regulacja wysokości koszenia
- The cutting height can be centrally adjusted to 6 levels, ranging from approximately 20 mm to 70 mm.
- To adjust, locate the height adjustment lever on the side of the mower.
- Move the lever to the desired position. Ensure all wheels are set to the same height for an even cut.

Obraz: szczegółowy view of the centralized cutting height adjustment mechanism, showing the 6 different height settings from 20mm to 70mm.
3. Uruchamianie i zatrzymywanie kosiarki
- To start: Press and hold the safety button, then pull the switch lever towards the handle. Release the safety button once the motor starts.
- To stop: Release the switch lever. The blade will stop quickly due to the integrated braking function.
4. Technika koszenia
- Koszenie należy wykonywać w pasach, które na siebie zachodzą, aby zapewnić równomierne cięcie.
- Aby uzyskać najlepsze rezultaty, koś trawę, gdy jest sucha.
- The mower is designed for clean, close-to-edge cutting on both sides.
- Regularly check the grass collection bag and empty it when the level indicator shows it is full.
Konserwacja
1. Ogólne czyszczenie
- Always disconnect the mower from the power supply before cleaning or performing any maintenance.
- Clean the robust, impact-resistant plastic housing with a damp ściereczką. Nie używaj silnych detergentów ani rozpuszczalników.
- Remove grass clippings from the underside of the mower and around the blade area using a brush or scraper.
- Clean the wide wheels with their lawn-friendly profile aby zapewnić płynne działanie.
2. Pielęgnacja ostrzy
- The special hardened and polished Mn40 steel blade should be kept sharp for optimal cutting performance.
- If the blade becomes dull or damaged, it should be sharpened or replaced by a qualified service technician.
- Always wear protective gloves when handling the blade.
3. Przechowywanie
- Przed przechowywaniem kosiarki należy ją dokładnie wyczyścić.
- Utilize the quick-release folding function to fold the handle for space-saving storage.
- Przechowuj kosiarkę w suchym i bezpiecznym miejscu, poza zasięgiem dzieci.
Rozwiązywanie problemów
Mower Does Not Start
- Sprawdź połączenie zasilania: Ensure the power cable is securely plugged into the mower and the electrical outlet. Verify the outlet is functional.
- Przełącznik bezpieczeństwa: Confirm the safety button is pressed before pulling the switch lever.
- Zabezpieczenie przed przeciążeniem: The mower may have an overload protection mechanism. Disconnect from power, wait a few minutes, and try again.
Słaba wydajność cięcia
- Tępe ostrze: The blade may be dull or damaged. Refer to the 'Blade Care' section under Maintenance.
- Wysokość koszenia: The cutting height may be set too low for the grass conditions. Adjust to a higher setting.
- Wet Grass: Avoid mowing wet grass, as it can clump and lead to an uneven cut.
Nadmierne wibracje
- Uszkodzone ostrze: A bent or unbalanced blade can cause vibration. Inspect the blade for damage.
- Luźne elementy: Check if any parts, especially the handle or blade fasteners, are loose. Tighten as necessary.
Jeśli napotkasz problemy, które nie zostały tutaj wymienione lub jeśli wykonanie czynności rozwiązywania problemów nie pomoże, skontaktuj się z obsługą klienta.
Dane techniczne
| Model | PRM 1800 A1 |
| Podłączenie zasilania | 1800 W |
| Prędkość bez obciążenia | 3250 obr./min |
| Grass Collection Bag Volume | Około. 55 litra |
| Szerokość cięcia | Około 44 cm |
| Regulacja wysokości koszenia | 6 poziomów (ok. 20-70 mm) |
| Materiał ostrza | Special hardened and polished Mn40 steel |
| Housing and Wheels Material | Polipropylen (PP) |
| Materiał uchwytu | Steel with Thermoplastic Rubber (TPR) |
| Wymiary (dł. x szer. x wys.) | Około. 141 x 49 x 109.5 cm |
| Waga | Około 17 kg |
| ASIN | B07X9DCVL7 |
| Numer modelu producenta | 4035485014996 |
Gwarancja i wsparcie
For information regarding warranty coverage, please refer to the warranty card included with your product packaging or contact the retailer where the product was purchased. For technical support, spare parts, or service inquiries, please contact Parkside customer service. Keep your purchase receipt and model number (PRM 1800 A1) readily available when contacting support.