DAOKI GR-US-093
DAOKI GR-US-093 4-Pin Tactile Push Button Switch User Manual
Model: GR-US-093 | Brand: DAOKI
Wstęp
This manual provides essential information for the DAOKI GR-US-093 4-Pin Tactile Push Button Switch. These momentary switches are designed for a wide range of electronic applications, offering reliable performance and a compact form factor. Each package contains 100 units of the 6x6x4.3mm switch.
Image: A collection of DAOKI 4-pin tactile push button switches, illustrating their compact size and design.
Konfiguracja i instalacja
The DAOKI GR-US-093 tactile switches are designed for PCB (Printed Circuit Board) mounting. Proper installation ensures optimal performance and longevity.
Montowanie
- These switches feature a 4-pin DIP (Dual In-line Package) configuration, suitable for through-hole mounting on a PCB.
- Ensure the PCB has appropriate pads and holes spaced for a 6x6mm switch footprint.
- The switch is designed for snap-in mounting, providing a secure fit before soldering.
Lutowanie
- Use a soldering iron with a fine tip and appropriate solder for electronic components.
- Apply heat to the pin and PCB pad simultaneously, then introduce solder to create a strong electrical and mechanical connection.
- Avoid excessive heat or prolonged contact, which can damage the switch or PCB.
Obraz: Zbliżenie view of several DAOKI tactile switches, highlighting their 4-pin design for PCB integration.
Instrukcja obsługi
The DAOKI GR-US-093 is a momentary action switch. This means the switch makes contact only while the button is being pressed and returns to its open state when released.
- Typ akcji: Momentary (SPST - Single Pole, Single Throw).
- Funkcjonować: When the button is pressed, the internal contacts close, completing a circuit. When released, the contacts open, breaking the circuit.
- Zastosowania: Ideal for input devices requiring a temporary signal, such as reset buttons, menu navigation, or simple on/off controls in electronic projects.
Film demonstracyjny
Video: A demonstration of a momentary tactile switch, showing its operation and physical characteristics. This video is provided by a seller and illustrates the general functionality of similar switches.
Konserwacja
These tactile switches are generally maintenance-free. However, following these guidelines can help ensure their longevity:
- Czyszczenie: If necessary, gently clean the exterior of the switch with a dry, soft cloth. Avoid using liquid cleaners directly on the switch, especially near the button mechanism or pins.
- Środowisko: Operate and store switches within the specified temperature range of -25°C to +80°C. Avoid environments with excessive dust, moisture, or corrosive gases.
- Zmeczenie fizyczne: Do not apply excessive force to the button or pins during installation or operation, as this can cause mechanical damage.
Rozwiązywanie problemów
If you encounter issues with your DAOKI tactile switches, consider the following common troubleshooting steps:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Przełącznik nie odpowiada | Poor solder joint, incorrect wiring, damaged switch. | Check solder connections for continuity. Verify wiring against circuit diagram. Replace switch if damaged. |
| Intermittent contact | Loose connection, internal contamination, worn contacts. | Re-solder connections. Ensure clean operating environment. Replace switch if contacts are worn. |
| Button feels stiff or stuck | Debris under button, physical damage, incorrect mounting. | Gently attempt to dislodge debris. Inspect for physical damage. Ensure switch is mounted correctly and not under stress. |
Specyfikacja produktu
| Funkcja | Szczegół |
|---|---|
| Numer modelu | GR-US-093 |
| Typ | Tactile Push Button Switch |
| Typ akcji | Chwilowy |
| Numer PIN | 4-pinowy dip |
| Wymiary (dł. x szer. x wys.) | 6 x 6 x 4.3 mm (0.24 x 0.24 x 0.17 cala) |
| Średnica przycisku | 3.5 mm (0.14 cala) |
| Wytrzymać objętośćtage | prąd zmienny 250 V |
| Obciążenie znamionowe | Prąd stały 12 V 50 mA |
| Kontakt Odporność | ≤0.03Ω |
| Rezystancja izolacji | ≥100MΩ |
| Temperatura pracy | -25°C do +80°C |
| Tworzywo | Plastic, Metal, Electric Parts |
| Stopień ochrony IP | IP54 |
| Ilość w opakowaniu | 100 sztuki |
Produkt dodatkowy Views
Wideo: Ponadview of a similar batch of tactile switches, showcasing their quantity and individual appearance. This video is provided by a seller and offers a visual reference for the product.
Video: A detailed look at various tactile pushbutton switches, demonstrating different form factors and their common applications. This video is provided by a seller and serves as a general guide for tactile switch types.
Gwarancja i wsparcie
For specific warranty information or technical support regarding your DAOKI GR-US-093 tactile switches, please refer to the seller's return policy or contact the manufacturer directly through their official channels. Keep your purchase receipt for any warranty claims.
Producent: DAOKI
ASIN: B07X8S99RH
Kod UPC: 886769927860
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.