Digitus USB to Serial Adapter User Manual

Wstęp

This manual provides instructions for the Digitus USB to Serial Adapter (Model DA-70167). This device enables data exchange between a personal computer with a USB port and various serial peripherals, such as machine controls, modems, and sensors. It is compliant with the USB 2.0 standard and features a PL2303GT chipset, offering customizable data transfer rates.

The adapter includes one USB 2.0 Male A connector and one D-SUB 9-Pin Male (RS232) connector, with gold-plated contacts for reliable connection. An 80 cm USB extension cable is also included for convenience.

Zawartość opakowania

• 1 x Digitus USB to Serial Adapter (DA-70167)
• 1 x 80 cm USB Extension Cable

Produkt ponadview

Rysunek 1: Digitus USB to Serial Adapter. This image shows the main view of the adapter, highlighting its compact design and the D-SUB 9-pin connector.

Rysunek 2: Connection points of the adapter. This diagram illustrates the RS232 (D-SUB 9-pin) and USB A 2.0 connectors on the adapter.

Rysunek 3: Z bliska view of the D-SUB 9-pin (RS232) male connector, showing the pin configuration.

Rysunek 4: View of the USB-A male connector, which plugs into the computer's USB port.

Organizować coś

Follow these steps to set up your Digitus USB to Serial Adapter:

1. Instalacja sterownika: Before connecting the adapter, it is recommended to install the necessary drivers for the PL2303GT chipset. Drivers are typically available on the Digitus support website or can be automatically installed by your operating system upon first connection.
2. Połącz z komputerem: Plug the USB-A male connector of the adapter into an available USB 2.0 port on your computer. You may use the included 80 cm USB extension cable if needed.
3. Połącz z urządzeniem szeregowym: Connect the D-SUB 9-pin male (RS232) connector of the adapter to the serial port of your peripheral device (e.g., modem, machine control, label printer, barcode scanner, POS system, cash register, network switch). Ensure the screws on the D-SUB connector are tightened to secure the connection.

Rysunek 5: Diagram showing a one-to-one connection setup, illustrating the adapter connecting a label printer or other RS-232 device to a laptop/PC.

Rysunek 6: The USB to Serial Adapter connected to a network switch and a laptop, demonstrating a typical application.

Instrukcja obsługi

Once the adapter is physically connected and drivers are installed, your computer should recognize the new serial port. You can then use software applications that require serial communication to interact with your connected peripheral device.

• Identifying the COM Port: After installation, check your computer's Device Manager (Windows) or System Information (macOS/Linux) to identify the assigned COM port number for the USB to Serial Adapter. This port number will be used by your serial communication software.
• Configuring Software: Open your serial communication software (e.g., PuTTY, Tera Term, HyperTerminal) and configure it to use the identified COM port. Set the appropriate communication parameters such as baud rate (data transfer rate), data bits, parity, stop bits, and flow control, matching the requirements of your serial peripheral device. The adapter supports customizable data transfer rates between 75 bit and 128,000 bit per second.
• Wymiana danych: Initiate data exchange through your software. The adapter will facilitate the communication between your computer's USB port and the serial device.

Rysunek 7: Diagram illustrating the wide range of devices compatible with the USB to Serial Adapter, including switches, laptops/PCs, label writers, barcode scanners, POS systems, printers, modems, and cash registers.

Konserwacja

The Digitus USB to Serial Adapter requires minimal maintenance. Follow these guidelines to ensure its longevity:

• Czyszczenie: Do czyszczenia zewnętrznej części adaptera należy używać miękkiej, suchej ściereczki. Nie należy używać płynnych środków czyszczących ani rozpuszczalników.
• Składowanie: Przechowuj adapter w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur, gdy nie jest używany.
• Obsługiwanie: Avoid dropping the adapter or subjecting it to strong impacts. Do not bend or twist the cable excessively.
• Pielęgnacja złącza: Utrzymuj złącza w czystości, bez kurzu i zanieczyszczeń. W razie potrzeby wyczyść porty sprężonym powietrzem.

Rozwiązywanie problemów

Specyfikacje

Gwarancja i wsparcie

Aby uzyskać informacje dotyczące gwarancji i pomocy technicznej, zapoznaj się z oficjalną stroną Digitus webOdwiedź witrynę lub skontaktuj się z działem obsługi klienta. Zachowaj paragon jako dowód zakupu na wypadek reklamacji.

Digitus Official Webstrona: www.digitus.info