YWBL-WH SKI780 Mini VFD Frequency Converter User Manual

1. Wprowadzenie

This manual provides essential information for the safe and efficient operation of the YWBL-WH SKI780 Mini VFD Frequency Converter. This device is designed to convert single-phase 220V AC power to three-phase 220V AC power, enabling control of 2.2kW motors. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper usage and prevent potential hazards.

The SKI780 features V/F control, vector control, and output torque control. It includes a speed potentiometer and an external panel for user interaction, offering 6 speed control modes for automatic operation. Integrated communication, synchronous control, proportional timing control, a user-defined counter/timer, and a PID regulation function facilitate closed-loop control of temperature, pressure, and voltage.

2. Środki ostrożności

OSTRZEŻENIE: Failure to follow these safety instructions may result in electric shock, injury, or equipment damage.

• Installation and operation must be performed by qualified professionals.
• Do not connect wiring when the power supply is turned on. This can cause electrical shock or injury.
• Ensure correct terminal voltage and polarity to prevent damage to the equipment or injury to personnel.
• Avoid routing power lines and signal lines through the same conduit or tying them together to prevent interference.
• The frequency inverter must be matched with an asynchronous motor. Ensure good heat dissipation conditions during operation.
• Do not touch the heat sink or brake resistor of the inverter while it is running, as they can be extremely hot and cause burns.
• Avoid frequent power supply switching. It is recommended to maintain a control interval of at least 1 minute.
• Connecting the AC power supply to the output terminals (U, V, W) of the frequency inverter is strictly prohibited, as this will cause internal damage to the unit.

3. Koniec produktuview

3.1 Wygląd i wymiary

3.2 Panel sterowania i wskaźniki

The control panel features a digital display and several buttons for programming and operation. Key indicators include:

• BIEGAĆ: Indicates the AC drive is in the running state (ON) or stop state (OFF).
• LOC: Indicates whether the AC drive is operated via the operation panel, terminals, or communication.
• P/P: Indicates reverse rotation.
• Hz, A, V: Unit Indicators. These indicate the temporary display unit.
  • Hz: Jednostka częstotliwości
  • A: Jednostka prądu
  • V: Jednostka objętościtage
  • Hz + A: Unit of rotational speed
  • A + V: Procenttage

3.3 Model Designation Rules

The model number SKI780-2D2G-1 can be broken down as follows:

• SKI780: Model series.
• 2D2: Power rating. 0D75 = 0.75kW, 1D5 = 1.5kW, 2D2 = 2.2kW.
• G: Ogólny cel.
• 1: Input Level. 1 = 1 phase 220V, 4 = 3 phase 380V.

4. Specyfikacje

5. Konfiguracja i instalacja

5.1 Wymagania dotyczące środowiska instalacji

• Stopień ochrony: IP20
• Wysokość instalacji: Maximum 1000 m (3280 ft) at sea level. For every 10 m (328 ft) increase in height above this value, the current should be reduced by 1.2%.
• Temperatura otoczenia:
  • At running: 0~40°C (32~104°F)
  • At storage: -20~55°C (-4~131°F)
  • At transportation: -20~60°C (-4~140°F)
• Wilgotność powietrza:
  • At running: 5%~85%, no condensation or freezing
  • At storage: 5%~95%

5.2 Instrukcje terminalowe

5.3 Schemat okablowania

The wiring diagram illustrates the connections for the main power input, motor output, braking resistor, and various control signals. Ensure all connections are secure and comply with local electrical codes.

• Three Phase Power Input (R, S, T): Connect your 220V single-phase AC power to terminals R and T.
• Braking Resistor (P+, BR): Connect an external braking resistor if dynamic braking is required.
• Moc silnika (U, V, W): Connect these terminals to your three-phase motor.
• Grunt: Zawsze należy zadbać o właściwe uziemienie w celach bezpieczeństwa.
• Terminale sterujące: The diagram shows connections for multifunctional digital inputs (DI1-DI5), analog inputs (AI1, AI2), analog output (AOV, AOI), high-speed pulse output (FM), open-circuit collector output (DO1), and RS485 communication (A+, B-).

6. Instrukcja obsługi

The SKI780 offers flexible control options for various applications. Refer to the detailed programming manual (available as PDF) for specific parameter settings.

• V/F Control: Standardowa objętośćtage/frequency control for general-purpose motor applications.
• Vector Control: Advanced control for improved torque response and speed regulation, especially at low speeds.
• Output Torque Control: Allows for precise control over the motor's output torque.
• Speed Control Modes: The unit supports 6 distinct speed control modes, configurable via the potentiometer or external panel.
• Integrated Communication: Utilize the built-in communication interface for remote control and monitoring.
• Synchronous and Proportional Timing Control: For applications requiring synchronized operations or precise timing.
• User-Defined Counter/Timer: Configure for specific counting or timing functions within your application.
• PID Regulation Function: Enables closed-loop control for maintaining constant temperature, pressure, or voltage.
• Blokada klawiatury: The unit allows for partial or full locking of the keypad to prevent unauthorized changes (analog potentiometer unlock function available).
• Wejścia/wyjścia cyfrowe: Six opto-isolated digital inputs and two high-configuration outputs (normally open/closed relay) offer extensive control possibilities with 100 optional settings each.
• Wejścia/wyjścia analogowe: Three analog inputs and one analog output channel provide flexible integration with external sensors and control systems.

7. Konserwacja

Regular maintenance ensures the longevity and reliable operation of your SKI780 Frequency Converter.

• Czyszczenie: Utrzymuj urządzenie w czystości, bez kurzu i zanieczyszczeń. Do czyszczenia używaj miękkiej, suchej ściereczki. Nie używaj płynnych środków czyszczących.
• Wentylacja: Ensure adequate airflow around the unit to maintain proper heat dissipation. Regularly check that ventilation openings are not obstructed.
• Znajomości: Periodically inspect all wiring connections for tightness and signs of wear or corrosion. Loose connections can lead to poor performance or damage.
• Warunki środowiskowe: Verify that the operating environment continues to meet the specified temperature and humidity requirements.
• Radiator: Ensure the heat sink remains clear of obstructions and dust buildup to prevent overheating.

8. Rozwiązywanie Problemów

This section provides general guidance for common issues. For detailed error codes and solutions, refer to the comprehensive PDF manual.

9. Gwarancja i wsparcie

For any questions or issues after purchase, please contact YWBL-WH customer support. We are committed to providing high-quality after-sales service and will address your inquiries seriously.

A detailed user manual in PDF format is available for download. This document contains comprehensive programming instructions and advanced troubleshooting guides.

Instrukcja w formacie PDF: Pobierz instrukcję obsługi (PDF)