Ohaus NVT6200 Navigator Series Portable Balance Instruction Manual

1. Wprowadzenie

The Ohaus Navigator Series Portable Balance, model NVT6200, is designed for accurate and repeatable weighing in various settings, including laboratory, industrial, and educational environments. This balance features fast stabilization, robust overload protection, and intuitive operation to enhance user efficiency and productivity.

Główne cechy obejmują:

• Fast stabilization time (less than one second).
• Overload protection up to four times its rated capacity.
• Touchless sensor for hands-free operation (zero, print, tare, change functions).
• Multiple weighing modes: Weighing, Parts Counting, Percent Weighing, Checkweighing.
• Multiple units of measure: g, kg, N, oz, ozt, dwt, lb, lb/oz, ct, grain.

Figure 1: Ohaus NVT6200 Navigator Series Portable Balance. This image shows the balance with its weighing pan and LCD display.

2. Konfiguracja

Follow these steps to set up your Ohaus NVT6200 Portable Balance:

1. Rozpakowywanie: Ostrożnie wyjmij wagę i wszystkie akcesoria z opakowania. Zachowaj opakowanie do transportu lub przechowywania w przyszłości.
2. Umieszczenie: Place the balance on a stable, level surface free from vibrations, drafts, and direct sunlight. Ensure the surface can support the weight of the balance and any items to be weighed.
3. Podłączenie zasilania:
   • Zasilacz: Connect the supplied AC adapter to the balance's power input and then to a suitable power outlet.
   • Moc baterii: For portable use, install four "C" batteries (not included) into the battery compartment located on the underside of the balance. Ensure correct polarity.
4. Niwelacja: Use the adjustable feet and the spirit level (if present, typically near the display) to ensure the balance is perfectly level. Adjust the feet by turning them clockwise or counter-clockwise until the bubble in the spirit level is centered.
5. Pierwsze włączenie: Naciśnij WŁ./WYŁ. button to turn on the balance. Allow a brief warm-up period for optimal performance.

3. Działanie

This section outlines the basic operational procedures for the NVT6200 balance.

3.1 Podstawowe ważenie

1. Turn on the balance by pressing the WŁ./WYŁ. przycisk.
2. Wait for the display to show "0.00 g" (or the last used unit) and the stability indicator to appear.
3. Place the item to be weighed on the center of the weighing pan.
4. Read the stable weight value displayed on the LCD.
5. Wyjmij potrawę z patelni.

3.2 Tarowanie (zerowanie)

Aby zważyć przedmiot w pojemniku, należy użyć funkcji Tara:

1. Połóż pusty pojemnik na szalce wagi.
2. Naciśnij TARA button (or use the touchless sensor if configured). The display will return to "0.00 g".
3. Dodaj przedmiot, który chcesz zważyć, do pojemnika. Na wyświetlaczu pojawi się waga netto przedmiotu.

3.3 Zmiana jednostek ważenia

The NVT6200 supports multiple weighing units. To change the unit:

• Naciśnij JEDNOSTKA button (or use the touchless sensor if configured) repeatedly to cycle through the available units (g, kg, N, oz, ozt, dwt, lb, lb/oz, ct, grain).
• Stop when the desired unit is displayed.

3.4 Using Weighing Modes

The balance offers various application modes:

• Ważenie: Standardowy pomiar wagi.
• Liczenie części: For counting a large number of identical items based on a reference weight.
• Ważenie procentowe: For measuring the weight of a sample jako procenttage masy referencyjnej.
• Kontrola ważenia: For checking if a sample's weight falls within a specified target range.

Refer to the detailed user manual for specific instructions on configuring and using each weighing mode, typically accessed via a TRYB or FUNKCJONOWAĆ przycisk.

4. Konserwacja

Proper maintenance ensures the longevity and accuracy of your Ohaus NVT6200 balance.

• Czyszczenie:
  • Przed przystąpieniem do czyszczenia należy zawsze odłączyć wagę od zasilania.
  • Clean the weighing pan and housing with a soft cloth dampz łagodnym detergentem lub wodą.
  • Nie należy używać środków czyszczących o działaniu ściernym, rozpuszczalników ani silnych środków chemicznych.
  • Ensure no liquid enters the balance housing.
• Kalibrowanie: Regular calibration with certified weights is recommended to maintain accuracy, especially after relocation or significant temperature changes. Refer to the full Ohaus manual for calibration procedures specific to the NVT6200 model.
• Składowanie: When not in use for extended periods, store the balance in a clean, dry, and stable environment. Engage the integrated shipping lock to protect the weighing cell during transportation or storage.

5. Rozwiązywanie Problemów

If you encounter issues with your NVT6200 balance, refer to the following common problems and solutions:

If the problem persists, contact Ohaus customer support or an authorized service center.

6. Specyfikacje

Technical specifications for the Ohaus NVT6200 Navigator Series Portable Balance:

• Model: NVT6200
• Maksymalna pojemność: 6200 gram
• Readability (Accuracy): 1 gram
• Rozmiar patelni: 9.1" x 6.9"
• Typ wyświetlacza: LCD
• Tworzywo: Stainless Steel (pan)
• Moc: AC Adaptor (Included) or 4 "C" Batteries (Not Included)
• Jednostki miary: g, kg, N, oz, ozt, dwt, lb, lb/oz, ct, grain
• Tryby ważenia: Ważenie, liczenie sztuk, ważenie procentowe, ważenie kontrolne
• Zakres tary: Full Capacity by Subtraction
• Waga przedmiotu: Około 5 funtów

7. Gwarancja i wsparcie

Ohaus products are manufactured under stringent quality standards. For warranty information and technical support, please refer to the official Ohaus website or contact your local Ohaus representative.

It is recommended to register your product to receive updates and support. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, visit the official Ohaus webstrona: www.ohaus.com