Walfront AS63D Digital Vibration Meter

1. Wprowadzenie

The Walfront AS63D Digital Vibration Meter is a high-sensitivity accelerometer vibrometer pen designed for accurate measurement of vibration. This device utilizes a piezoelectric acceleration transducer to convert vibration signals into electrical signals, which are then analyzed to display acceleration, velocity, and displacement values. Its portable design and clear LCD backlight make it suitable for various applications in power, petrochemical, machinery manufacturing, metallurgy, and vehicle industries.

Figure 1: Walfront AS63D Digital Vibration Meter, a compact and portable device for vibration measurement.

2. Informacje dotyczące bezpieczeństwa

• Przed przystąpieniem do użytkowania urządzenia należy uważnie przeczytać wszystkie instrukcje.
• Nie należy podejmować prób demontażu ani modyfikacji urządzenia. Nieautoryzowane modyfikacje mogą prowadzić do nieprawidłowego działania lub obrażeń.
• Keep the device away from water, high temperatures, and corrosive environments.
• Ensure proper battery installation and replacement. Use only recommended battery types.
• Unikaj upuszczania urządzenia i narażania go na silne uderzenia.
• When measuring, ensure the probe is securely attached and the measurement point is stable to prevent injury or damage to the device.

3. Koniec produktuview

The Walfront AS63D features a user-friendly design with an LCD display and intuitive controls. Key components include:

• Sonda pomiarowa: Used to contact the object for vibration measurement.
• A/V/D Button: Selects between Acceleration, Velocity, and Displacement measurement modes.
• LO/HI Button: Selects the frequency characteristic (low or high frequency range) for acceleration measurements.
• MEAS/ON Button: Short press to turn on the device, long press to initiate measurement.
• Wyświetlacz LCD: Shows measurement values, battery status, and selected modes with backlight for clear reading.

Figure 2: Labeled diagram of the Walfront AS63D Digital Vibration Meter showing its main components and controls.

Figure 3: Dimensions of the Walfront AS63D Digital Vibration Meter and view komory baterii.

4. Konfiguracja

4.1 Instalacja baterii

1. Znajdź pokrywę komory baterii z tyłu urządzenia (patrz rysunek 3).
2. Aby otworzyć komorę, przesuń lub odepnij pokrywę.
3. Insert the required batteries (typically AAA, check device markings) ensuring correct polarity (+/-).
4. Dokładnie zamknij pokrywę komory baterii.

4.2 Probe Selection

The AS63D comes with different probe options to suit various measurement conditions:

• Short Probe Tip: This is the factory default. It is suitable for wide-scope vibration measurements and provides good response values.
• Long Probe Tip: Included in the carry box, this tip is designed for measurements in narrow spaces or on special objects, allowing for quick response.
• No Probe Tip: For measurements on smooth object surfaces, the device can be used without a probe tip to obtain stable values.

Select the appropriate probe tip based on your measurement needs and screw it firmly onto the measuring probe connection point.

5. Działanie

5.1 Włączanie/wyłączanie zasilania

• Aby włączyć urządzenie, naciśnij krótko MEAS/ON przycisk. Wyświetlacz LCD zostanie podświetlony.
• Aby wyłączyć urządzenie, naciśnij i przytrzymaj przycisk MEAS/ON button until the display turns off. The device may also have an auto-off feature after a period of inactivity.

5.2 Measurement Mode Selection

Naciśnij Audiowizualne i wideo przycisk umożliwiający przełączanie trybów pomiaru:

• Acceleration (A): Measures the rate of change of velocity.
• Velocity (V): Measures the speed of vibration.
• Displacement (D): Measures the distance an object moves from its equilibrium position.

Wybrany tryb zostanie wyświetlony na wyświetlaczu LCD.

5.3 Frequency Characteristic Selection (Acceleration Mode Only)

When in Acceleration mode, press the LO/CZEŚĆ button to select the desired frequency range:

• LO (niska częstotliwość): For measuring vibrations in lower frequency ranges.
• HI (wysoka częstotliwość): For measuring vibrations in higher frequency ranges.

5.4 Wykonywanie pomiaru

1. Ensure the correct probe tip is attached for your application.
2. Turn on the device by short pressing MEAS/ON.
3. Select the desired measurement mode (Acceleration, Velocity, or Displacement) using the Audiowizualne i wideo przycisk.
4. If in Acceleration mode, select the appropriate frequency range (LO/HI) using the LO/CZEŚĆ przycisk.
5. Firmly press the measuring probe against the surface of the object whose vibration you wish to measure.
6. Naciśnij i przytrzymaj MEAS/ON button to initiate the measurement. The device will analyze the vibration and display the results on the LCD.
7. Read the displayed value. The LCD backlight ensures clear visibility.

Figure 4: The Walfront AS63D Digital Vibration Meter being used to measure vibration on industrial equipment.

Rysunek 5: Zbliżenie view of the Walfront AS63D's LCD display, showing a measurement reading.

6. Specyfikacje

7. Konserwacja

• Czyszczenie: Przetrzyj urządzenie miękką, suchą ściereczką. Nie używaj środków czyszczących o właściwościach ściernych ani rozpuszczalników.
• Składowanie: When not in use for extended periods, remove the batteries to prevent leakage. Store the device in its protective case (Figure 6) in a cool, dry place, away from direct sunlight and extreme temperatures.
• Pielęgnacja sondy: Keep the probe tips clean and free from debris. Ensure they are not bent or damaged.
• Wymiana baterii: Wymień baterie, gdy na wyświetlaczu LCD pojawi się wskaźnik niskiego poziomu naładowania baterii.

Figure 6: The Walfront AS63D Digital Vibration Meter stored in its protective case.

8. Rozwiązywanie Problemów

9. Gwarancja i wsparcie

For warranty information, technical support, or service inquiries regarding your Walfront AS63D Digital Vibration Meter, please refer to the documentation provided at the time of purchase or contact Walfront customer service directly. Contact details can typically be found on the manufacturer's official webna stronie internetowej lub u sprzedawcy.