1. Koniec produktuview
The BSEED Surge Protector Outlet is designed to safeguard your home appliances from electrical damage caused by voltage fluctuations, power surges, and brownouts. This adjustable voltage regulator provides reliable protection for 220V systems, with a maximum capacity of 4400W. It features LED indicators for status monitoring and a built-in delay function to ensure stable power re-establishment after interruptions.
Rycina 1: Przód view of the BSEED 220V Surge Protector Outlet, showing the outlet and LED indicators.
2. Informacje dotyczące bezpieczeństwa
Przed użyciem produktu należy przeczytać i zrozumieć wszystkie instrukcje bezpieczeństwa. Nieprzestrzeganie tych instrukcji może spowodować porażenie prądem, pożar lub poważne obrażenia.
- Nie rozmontowuj i nie modyfikuj urządzenia.
- Upewnij się, że objętośćtage i cotage of your appliance do not exceed the protector's specifications (220V, 4400W).
- Nie stosować w wilgotnym otoczeniu ani w pobliżu wody.
- Przechowywać w miejscu niedostępnym dla dzieci.
- Jeśli urządzenie wydaje się uszkodzone, należy natychmiast zaprzestać jego używania.
- Urządzenie przeznaczone jest wyłącznie do użytku wewnątrz pomieszczeń.
3. Funkcje produktu
- Regulowana objętośćtage Rozporządzenie: Customize minimum and maximum voltage thresholds between 170V and 265V to suit your specific needs.
- Kompleksowa ochrona: Guards against high and low voltage, brownouts, spikes, instant surges, power failures, voltage fluctuations, and load shedding.
- Szerokie zastosowanie: Suitable for various home appliances including air conditioners, freezers, ice makers, washing machines, ovens, microwave ovens, dishwashers, coffee machines, bread machines, water heaters, and electric fans.
- Safety Cycle & Delay Function: After a power event, the device initiates a 3-minute delay to confirm voltage stability before restoring power, indicated by a SAFETY CYCLE light turning green.
- Wskaźniki LED: Clearly displays operational status (Normal Voltage, Waiting Cycle, Over Voltage, niska objętośćtagmi).
4. Konfiguracja i instalacja
Follow these steps to install your BSEED Surge Protector Outlet:
- Rozpakuj urządzenie: Ostrożnie wyjmij listwę przeciwprzepięciową z opakowania.
- Identify the VoltagRegulacja: Locate the adjustable voltage knob on the back of the unit.
- Dostosuj głośnośćtage Thresholds (Optional): Using a small screwdriver, carefully turn the knob to set your desired minimum and maximum voltage protection levels (default range is 170V to 265V). Refer to the markings on the back of the unit for guidance.
- Włączać do kontaktu: Insert the surge protector directly into a standard 220V wall outlet.
- Podłącz urządzenie: Plug your appliance into the outlet on the front of the surge protector.
- Włączanie: Flip the power switch on the side of the surge protector to the 'ON' position.
Rysunek 2: Tył view of the surge protector, highlighting the adjustable voltage regulation knob.
Video 1: Official BSEED video demonstrating the US Plug Home Appliance Surge Protector (220V) and its features.
5. Instrukcja obsługi
The surge protector operates automatically once plugged in and switched on. Its LED indicators provide real-time status information:
Figure 3: Close-up of the LED indicators on the BSEED Surge Protector.
| Wskaźnik | Status | Opis |
|---|---|---|
| Normalna objętośćtage (zielony) | Oświetlony | Power is stable and within acceptable voltage range. Appliance is receiving power. |
| Waiting Cycle (Yellow) | Oświetlony | After a power interruption or voltage anomaly, the device is in a 3-minute delay period to stabilize voltage before restoring power. |
| Ponad tomtage (Red) | Oświetlony | Objętość wejściowatage is too high. Power to the appliance is cut off for protection. |
| Niska objętośćtage (Red) | Oświetlony | Objętość wejściowatage is too low (brownout). Power to the appliance is cut off for protection. |
Podczas objtage anomaly (over or low voltage), the corresponding red LED will light up, and power to the connected appliance will be interrupted. Once the voltage returns to a normal range, the 'Waiting Cycle' (yellow) indicator will light up, initiating a 3-minute delay. After this delay, if the voltage remains stable, the 'Normal Voltage' (green) indicator will light up, and power will be restored to your appliance.
6. Konserwacja
The BSEED Surge Protector Outlet requires minimal maintenance. Follow these guidelines to ensure its longevity and optimal performance:
- Czyszczenie: Disconnect the surge protector from the wall outlet before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
- Kontrola: Periodically inspect the device for any signs of damage, such as cracks in the casing, frayed wires, or discoloration. If any damage is observed, discontinue use and replace the unit.
- Środowisko: Ensure the surge protector is used in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.
7. Rozwiązywanie Problemów
If you encounter issues with your surge protector, refer to the following table:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Appliance not receiving power. | Surge protector is off. | Ensure the power switch on the side is in the 'ON' position. |
| Appliance not receiving power, 'Over Voltage' or 'Low Voltage' LED is lit. | Objętość wejściowatage is outside the safe range. | The protector is functioning as designed. Wait for voltage to normalize. If the issue persists, consult an electrician. |
| Appliance not receiving power, 'Waiting Cycle' LED is lit. | Device is in delay mode after a voltagWydarzenie. | This is normal. Wait for the 3-minute delay to complete and for the 'Normal Voltage' LED to light up. |
| No LEDs are lit, and no power to appliance. | No power from wall outlet or device malfunction. | Check the wall outlet with another device. If the outlet is functional, the surge protector may be faulty and needs replacement. |
| Regulowana objętośćtage knob does not seem to change protection levels. | Incorrect adjustment or misunderstanding of function. | Ensure you are using a small screwdriver and turning the knob firmly. The adjustment sets the thresholds, not the output voltage. |
8. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Marka | BSEED |
| Numer modelu | BSSP010220V1P-1 |
| Tomtage | 220 woltów |
| Maksymalny prąd | 20 A |
| Ocena ochrony przeciwprzepięciowej | 4400 watów |
| Całkowita moc gniazdek | 1 |
| Regulowana objętośćtage Zakres | 170 V - 265 V |
| Funkcja opóźnienia | 3 minut |
| Typ wtyczki | Typ B - 3-pinowy (północnoamerykański) |
| Tworzywo | Plastikowy |
| Wymiary przedmiotu (dł. x szer.) | 4.72" dł. x 3.15" szer. |
9. Gwarancja i wsparcie
This BSEED Surge Protector Outlet comes with a 2-letnia gwarancja from the date of purchase, covering defects in materials and workmanship under normal use. This warranty does not cover damage caused by misuse, accident, unauthorized modification, or external causes.
For technical support, warranty claims, or further assistance, please contact BSEED customer service through the retailer where the product was purchased or visit the official BSEED webwitryna do informacji kontaktowych.