Wstęp
This manual provides detailed instructions for the setup, operation, and maintenance of your Samson PXD1 Wireless Lavalier Microphone Transmitter. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize its performance. The PXD1 is designed to capture audio wirelessly and transmit it to your Mac or Windows computer via a compatible USB receiver (sold separately).
Zawartość opakowania
Sprawdź, czy w przesyłce znajdują się wszystkie wymienione poniżej elementy:
- Samson PXD1 Wireless Lavalier Microphone Transmitter
- Mikrofon Lavalier
- Kabel ładujący USB
- Instrukcja obsługi (ten dokument)
Produkt ponadview
The Samson PXD1 is a compact and lightweight beltpack transmitter designed for wireless audio capture. It operates on the 2.4 GHz frequency band, providing reliable digital audio transmission.

Figure 1: Samson PXD1 Wireless Lavalier Microphone Transmitter. This image shows the compact design of the PXD1 transmitter unit.
Kluczowe komponenty:
- Przycisk zasilania: Used to turn the unit on and off.
- Dioda LED stanu: Indicates power, battery status, and pairing status.
- Wejście mikrofonowe: Gniazdo 3.5 mm do podłączenia mikrofonu krawatowego.
- Port USB: Do ładowania wewnętrznego akumulatora.
- Sprzączka: For attaching the transmitter to clothing or a belt.
Organizować coś
- Naładuj nadajnik: Connect the PXD1 transmitter to a USB power source using the provided USB cable. The Status LED will indicate charging status. Ensure the unit is fully charged before first use.
- Connect the Lavalier Microphone: Plug the lavalier microphone's 3.5mm connector into the Microphone Input jack on the PXD1 transmitter. Secure the microphone to your clothing, approximately 6-8 inches from your mouth, for optimal sound capture.
- Pair with USB Receiver: The PXD1 requires a compatible Samson USB receiver (sold separately) to function.
- Turn on the PXD1 transmitter by pressing and holding the Power Button until the Status LED illuminates.
- Plug the Samson USB receiver into an available USB port on your Mac or Windows computer.
- Follow the pairing instructions provided with your specific Samson USB receiver. Typically, this involves pressing a pairing button on both the transmitter and receiver until a solid connection is indicated by their respective status LEDs.
- Połącz z komputerem: Once paired, your computer should recognize the USB receiver as an audio input device. Select it as your input device in your operating system's sound settings and your preferred digital audio software.
Instrukcja obsługi
- Włączanie/wyłączanie: Press and hold the Power Button for approximately 2 seconds to turn the PXD1 on or off. The Status LED will light up when powered on.
- Monitor Audio Levels: Before recording or live streaming, perform a sound check. Speak into the lavalier microphone at your normal speaking volume and monitor the input levels in your digital audio software. Adjust the input gain on your computer or software as needed to prevent clipping (distortion) and ensure a strong signal.
- Pozycjonowanie: Ensure the lavalier microphone is positioned correctly to capture clear audio. Avoid placing it where it might rub against clothing, which can cause unwanted noise.
- Zakres: Maintain a clear line of sight between the PXD1 transmitter and the USB receiver for optimal wireless performance. Obstacles can reduce the effective range.
- Czas pracy baterii: The Status LED will change color or flash to indicate low battery. Recharge the unit promptly when this occurs.
Konserwacja
- Czyszczenie: Use a soft, dry cloth to clean the exterior of the PXD1 transmitter. Do not use liquid cleaners or solvents.
- Składowanie: When not in use, store the transmitter in a cool, dry place, away from direct sunlight and extreme temperatures.
- Pielęgnacja baterii: Aby zapewnić optymalną żywotność baterii, należy unikać częstego całkowitego rozładowywania. W przypadku dłuższego przechowywania, należy ładować baterię do około 50% poziomu naładowania co kilka miesięcy.
- Pielęgnacja mikrofonu: Keep the lavalier microphone clean and free from dust or debris.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Brak dźwięku |
|
|
| Słaba jakość dźwięku / Zniekształcenia |
|
|
| Transmitter won't turn on |
|
|
Specyfikacje
- Marka:
- SAMSON
- Nazwa modelu:
- PXD1
- Technologia łączności:
- USB (via compatible receiver)
- Typ złącza:
- USB (for charging/receiver connection)
- Wzór biegunowy:
- Unidirectional (Lavalier Microphone)
- Waga przedmiotu:
- 2.4 uncji
- Wymiary przedmiotu (dł. x szer. x wys.):
- 3.6 x 2.2 x 0.9 cala
- Źródło zasilania:
- Przewodowy elektryczny (zasilany przez USB)
- Zalecane zastosowanie:
- Podcasting, Voice Recording
- Zgodne urządzenia:
- Personal Computer (Mac/Windows)
- Numer części producenta:
- SWXPD1BP
- Kod UPC:
- 809164218579
Gwarancja i wsparcie
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Samson webZachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.
Samson Official Webstrona: www.samsontech.com