Wstęp
Thank you for choosing the Modway Omnistand 74-inch Mid-Century Modern Low Profile Media Console Entertainment TV Stand. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image: The Modway Omnistand TV Stand, showcasing its mid-century modern design with a television placed on top, in a living room environment.
Informacje dotyczące bezpieczeństwa
- Przeczytaj wszystkie instrukcje: Przed przystąpieniem do dalszych czynności upewnij się, że rozumiesz wszystkie kroki montażu i ostrzeżenia dotyczące bezpieczeństwa.
- Zalecany montaż w dwie osoby: Ze względów bezpieczeństwa i łatwości montażu zaleca się, aby montaż wykonywały dwie osoby dorosłe.
- Nośność: Do not exceed the maximum weight capacity of 85 pounds (38.5 kg) for the top surface. Distribute weight evenly across shelves and the top surface.
- Urządzenie zapobiegające przewróceniu: If an anti-tip device is included, it is strongly recommended to install it to prevent serious injury from tipping furniture.
- Umieszczenie: Ustaw stojak pod telewizorem na płaskiej, równej i stabilnej powierzchni.
- Bezpieczeństwo dzieci: Keep small parts and packaging materials away from children. Do not allow children to climb on or play with the TV stand.
- Ostrzeżenie dotyczące propozycji 65: Ten produkt może zawierać chemikalia, o których w stanie Kalifornia wiadomo, że powodują raka i wady wrodzone lub inne szkody rozrodcze.
Zawartość opakowania
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact Modway customer support for assistance.
- Main console panels (top, bottom, sides, back)
- Splayed legs
- Open shelves
- Full-extension center drawer components
- Sliding door panels
- Hardware pack (screws, dowels, cam locks, drawer slides, door glides, etc.)
- Instrukcja montażu
Konfiguracja i montaż
Assembly of the Modway Omnistand TV Stand typically requires approximately 2-3 hours for one person, though two people are recommended for efficiency and safety. Follow the included step-by-step instructions carefully. Lay out all parts on a soft, clean surface to prevent scratches.
- Rozpakuj i zidentyfikuj części: Carefully unpack all components and hardware. Compare them against the parts list in your instruction manual to ensure everything is present.
- Złóż ramę główną: Begin by connecting the main console panels according to the diagrams. Pay close attention to the orientation of each piece.
- Montaż nóg: Attach the sturdy splayed legs to the base of the console. Ensure they are securely fastened.
- Złóż szufladę: Construct the full-extension center drawer, ensuring the slides are correctly installed for smooth operation.
- Install Shelves and Doors: Insert the open shelves into their designated slots. Carefully install the sliding doors into their tracks on either side of the center drawer. If doors are difficult to install, ensure tracks are clear and aligned.
- Kontrole końcowe: Once assembled, gently move the unit to its desired location. Ensure all connections are tight and the stand is stable.
Image: Diagram showing the dimensions of the Modway Omnistand TV Stand: 15 inches deep, 74 inches wide, and 23 inches high.
Obraz: Przód view of the Modway Omnistand TV Stand, highlighting the central drawer and side compartments.
Instrukcja obsługi
The Modway Omnistand TV Stand is designed for convenient media storage and display.
- Zastosowanie szuflady: The central drawer features full-extension slides for easy access to its contents. Pull the drawer gently from the integrated handle to open and push to close.
- Drzwi przesuwne: The side compartments are concealed by solid sliding doors. Gently slide the doors along their tracks to open or close, revealing or hiding the storage space.
- Otwarte półki: The two open shelves above the central drawer are ideal for media devices such as cable boxes, gaming consoles, or soundbars.
- Zarządzanie kablami: Utilize the integrated cable management holes at the back of the unit to organize and route power cords and signal cables, maintaining a clean and tidy appearance.
Obraz: szczegółowy view of the Modway Omnistand TV Stand, showing the open central drawer and the two open shelves above it, designed for media components.
Konserwacja
Proper care will ensure the longevity and appearance of your Modway Omnistand TV Stand.
- Czyszczenie: Przetrzyj powierzchnie miękką, damp cloth. Avoid abrasive cleaners, harsh chemicals, or polishes that may damage the walnut grain laminate finish.
- Wycieki: Natychmiast wytrzyj wszelkie rozlane płyny, aby zapobiec powstawaniu plam lub uszkodzeniom powłoki.
- Ekspozycja na światło słoneczne: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the wood veneer.
- Ciepło i wilgoć: Keep the unit away from direct heat sources and areas of high humidity. Use coasters under hot or wet items placed on the surface.
- Sprawdzenie sprzętu: Periodically check and tighten all screws and fasteners to ensure the unit remains stable and secure.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Brakujące części lub sprzętu | Błąd w opakowaniu lub jego zagubienie podczas rozpakowywania. | Carefully re-check all packaging materials. Contact Modway customer support for replacement parts. |
| Trudności z montażem | Incorrect orientation of parts, loose fasteners, or skipped steps. | Review the assembly instructions carefully, paying close attention to diagrams and part numbers. Ensure all fasteners are tightened appropriately. Consider having a second person assist. |
| Drawer or sliding door not operating smoothly | Improper installation of slides or tracks, obstruction, or misalignment. | Verify that drawer slides and door tracks are installed correctly and are free of debris. Ensure the unit is level. Adjust as needed. |
| Jednostka wydaje się niestabilna lub chwiejna | Luźne elementy złączne lub nierówne rozmieszczenie. | Check and tighten all screws and connections. Ensure the TV stand is placed on a level surface. |
| Limited space for cable management | Number of devices or cable thickness exceeds available space. | Utilize cable ties or sleeves to bundle cables. Consider slim-profile power strips or right-angle connectors if space is very tight. |
Specyfikacje
- Marka: Modway
- Nazwa modelu: Omnistand
- Numer modelu: EEI-3437-WAL
- Tworzywo: Wood (Particleboard with Walnut Grain Veneer)
- Kolor: Orzech włoski
- Wymiary produktu (gł. x szer. x wys.): 15" gł. x 74" szer. x 23" wys. (38.1 cm x 187.96 cm x 58.42 cm)
- Waga przedmiotu: 84 funtów (38.1 kg)
- Weight Capacity (Maximum): 85 funtów (38.5 kg)
- Liczba półek: 2 (otwarte)
- Liczba szuflad: 1 (full-extension)
- Typ montażu: Montaż podłogowy (wolnostojący)
- Zalecane zastosowanie: Living Room, Recreation Area, Bedroom
- GTIN/UPC: 889654149934
Informacje o gwarancji
The Modway Omnistand TV Stand comes with a one-year warranty against manufacturer defects from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper assembly, misuse, abuse, accidents, modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Obsługa klienta
If you have any questions regarding the assembly, operation, missing parts, or warranty of your Modway Omnistand TV Stand, please contact Modway customer service. Refer to the contact information provided with your product packaging or visit the official Modway webstronie, aby uzyskać szczegółowe informacje na temat pomocy technicznej.
Filmy o produktach
No official seller-provided instructional videos directly relevant to the Modway Omnistand TV Stand (Model EEI-3437-WAL) were found for embedding in this manual.