InnoGear Microphone Boom Arm Stand User Manual

1. Koniec produktuview

The InnoGear Microphone Boom Arm Stand is engineered for stability, durability, and versatility, providing an optimal solution for recording, broadcasting, and podcasting. Constructed from robust metal with double-braced arms and strong springs, this stand ensures reliable support for a wide range of microphones. Its highly adjustable design allows for precise positioning, while the included pop filter enhances audio clarity by reducing plosive sounds.

Figure 1.1: Complete InnoGear Microphone Boom Arm Stand with all included accessories.

2. Główne cechy

2.1 Enhanced Durability

The InnoGear mic stand features an upgraded design with alloy steel construction, a thickened arm, and stronger springs to ensure prolonged lifetime and stable performance, preventing common issues like spring deformation found in other stands.

Figure 2.1: Comparison illustrating the enhanced durability features of the InnoGear stand.

2.2 Heavy-Duty Construction

Built with high-quality steel, the stand boasts a superior load-bearing capacity of 3.3 lb (1.5 kg). It includes two positioning screw options, allowing you to adjust the spring tension to increase load-bearing capability for heavier microphones.

Figure 2.2: Illustration of the stand's heavy-duty construction and load capacity.

2.3 Fully Adjustable Extended Reach

The microphone arm offers extensive adjustability for optimal positioning. It features a 360° base rotation, 135° back and forth extension, 180° arm shaft movement for up-and-down adjustments, and a 270° metal adapter for precise microphone angling.

Rysunek 2.3: Szczegółowy view of the stand's adjustable range and dimensions.

2.4 Biurko klamp Zgodność

The upgraded table clamp is designed to securely grip squared desk edges up to 2 inches (5 cm) in thickness. It features a side screw for firm attachment and a sponge pad to protect your desk surface from scratches. Please ensure your desk edge is flat for optimal functionality.

Figure 2.4: Visual guide for desk clamp zgodność.

2.5 Wide Microphone Compatibility

The stand comes with a standard mic clip suitable for dynamic microphones like Shure SM58 and Samson Q2U. Additionally, a 5/8" to 3/8" screw adapter is included, making it compatible with popular microphones such as Blue Yeti, Blue Snowball, HyperX QuadCast, SoloCast, Shure SM7B, MV7, Fifine AmpliGame, and Fifine K669B.

Figure 2.5: Screw adapter and compatible microphone models.

The included mic holder is designed for microphones with an outer diameter of 32-58mm, featuring internal springs and sponge pads for secure and protected mounting. Notatka: This specific mic clip is not suitable for Blue Yeti or Blue Snowball microphones.

Figure 2.6: Mic holder specifications and compatible microphone types.

2.6 Studio Quality Pop Filter

The included two-layer pop filter is 360° all-angle adjustable. It effectively dissipates air and reduces velocity, minimizing plosive sounds (like 'P' and 'B') for clean and professional vocal recordings.

Figure 2.7: Functionality of the studio quality pop filter.

3. Instrukcje konfiguracji

3.1 Zawartość opakowania

• Stojak na wysięgnik mikrofonu
• Montaż na biurku Clamp
• Klips mikrofonowy
• 5/8" to 3/8" Screw Adapter
• Filtr pop
• Microphone Holder (for mics 32-58mm diameter)
• Cable Ties (InnoGear branded)

3.2 Etapy montażu

1. Dołącz pulpit klamp: Secure the desk mounting clamp to a flat desk edge (maximum 2 inches thick). Tighten the side screw firmly until the clamp is stable. Ensure the sponge pad is positioned to protect your desk surface.
2. Włóż ramię wysięgnika: Slide the base of the boom arm into the hole on the desk clamp. Tighten the locking knob on the clamp aby zamocować ramię na miejscu.
3. Attach Microphone Adapter/Clip:
   • For microphones with a 5/8" thread (e.g., Blue Yeti, HyperX QuadCast), screw the microphone directly onto the arm's 5/8" screw.
   • For microphones with a 3/8" thread (e.g., some shock mounts), first screw the included 5/8" to 3/8" adapter onto the arm, then attach your microphone or shock mount.
   • For dynamic microphones (e.g., Shure SM58) or microphones with 32-58mm diameter, attach the appropriate microphone clip or holder to the arm's screw, then insert your microphone into the clip/holder.
4. Zainstaluj filtr Pop: Rozluźnij clamp on the pop filter and attach it to a suitable section of the boom arm. Adjust its position and angle using the flexible gooseneck until it is directly in front of your microphone.
5. Zarządzanie kablami: Use the provided cable ties to neatly secure your microphone cable along the boom arm, preventing tangles and ensuring a clean setup.

Rysunek 3.1: Example of a fully assembled InnoGear mic stand setup.

4. Operating Your Mic Stand

4.1 Adjusting the Arm

The boom arm is designed for smooth and silent adjustments. To change the height or angle, gently move the arm to your desired position. The internal springs will hold the arm in place. For fine-tuning, utilize the 360° base rotation and the 270° metal adapter at the microphone end.

4.2 Umiejscowienie mikrofonu

Position your microphone approximately 6-12 inches (15-30 cm) from your mouth for optimal sound capture. Experiment with different distances and angles to find the best sound quality for your specific recording environment and microphone type.

4.3 Using the Pop Filter

Place the pop filter between your mouth and the microphone, typically 1-2 inches (2.5-5 cm) from the microphone. This will effectively block plosive sounds (harsh 'P' and 'B' sounds) and protect your microphone from moisture, ensuring clearer audio recordings.

5. Pielęgnacja i konserwacja

• Czyszczenie: Regularnie przecieraj podstawkę miękką, suchą ściereczką, aby usunąć kurz i odciski palców. W przypadku uporczywych zabrudzeń, delikatnie przetrzyj.amp Można użyć ściereczki, a następnie natychmiast wysuszyć. Unikać środków czyszczących o działaniu ściernym i rozpuszczalników.
• Smarowanie: The joints and springs are designed for smooth operation. If any squeaking occurs over time, a small amount of silicone-based lubricant can be applied to the pivot points.
• Składowanie: When not in use, the stand can be easily folded and pushed away for space-saving storage. Ensure it is stored in a dry environment to prevent rust.
• Napięcie sprężyny: Periodically check the spring tension. If the stand struggles to hold heavier microphones, consider adjusting the springs to the second hole for increased load-bearing capacity as described in Section 2.2.

6. Rozwiązywanie Problemów

7. Specyfikacje techniczne

• Numer modelu: MU056
• Tworzywo: High-Quality Steel
• Kolor: Black (as depicted in images)
• Maksymalna ładowność: 1.5 kg (3.3 funta)
• Arm Length (each section): Około 13.8 cala (35 cm)
• Biurko Clamp Zgodność: Up to 2 inches (5 cm) thick flat desk edges
• Microphone Thread: 5/8" (with included 3/8" adapter)
• Filtr pop: Dual-layer, 360° adjustable
• Waga przedmiotu: 760 gram
• Wymiary opakowania: Wymiary 42.9 x 16.69 x 6.4 cm

8. Gwarancja i wsparcie

InnoGear products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official InnoGear website. If you encounter any issues or require technical assistance, please contact InnoGear customer support through the contact information provided on our website or your purchase platform. Please have your model number (MU056) and purchase details ready when contacting support.