Instrukcja obsługi fotela gamingowego Diablo X-Ray

Wstęp

Welcome to the user manual for your new Diablo X-Ray Gaming Chair. This chair is designed to provide optimal comfort and ergonomic support for extended periods of gaming or work. Featuring advanced adjustability, high-quality materials, and a robust construction, the Diablo X-Ray 2.0 ensures a superior seating experience. Please read this manual carefully before assembly and use to ensure proper setup and to maximize the lifespan of your chair.

Rycina 1: Przód view of the Diablo X-Ray Gaming Chair, showcasing its ergonomic design and black-grey color scheme.

Wytyczne bezpieczeństwa

To ensure safe operation and prevent damage to the chair or injury, please observe the following guidelines:

• Nośność: Nie przekraczać maksymalnego udźwigu 150 kg (około 330 funtów).
• Prawidłowe użycie: Use the chair only for its intended purpose of seating. Avoid standing on the chair or using it as a ladder.
• Montaż: Ensure all components are securely fastened before use. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
• Dzieci i zwierzęta: Podczas montażu należy trzymać dzieci i zwierzęta z dala od krzesła.
• Ruchome części: Be cautious of moving parts during adjustment to avoid pinching.
• Stabilność: Always ensure the chair is on a stable, level surface.

Zawartość opakowania

Before beginning assembly, please verify that all components are present in your package.

• Oparcie
• Seat Base with Armrests (pre-attached)
• Gwiezdna baza
• Kółka (5x)
• Siłownik gazowy
• Pokrywa windy gazowej
• Poduszka lędźwiowa
• Headrest Pillow (Magnetic)
• Sprzęt montażowy (śruby, podkładki, klucz imbusowy)
• Instrukcja obsługi

Instrukcje konfiguracji

Follow these steps carefully to assemble your Diablo X-Ray Gaming Chair. It is recommended to have a second person assist with some steps.

1. Montaż podstawy:

   Insert the five casters into the holes at the end of each leg of the star base. Push firmly until they click into place. Place the gas lift cylinder into the center hole of the star base, then slide the gas lift cover over the cylinder.

   

   Figure 2: Detail of the robust chair base and smooth-rolling PFC 360 casters.
2. Zamontuj siedzisko na podstawie:

   Carefully align the center hole of the seat base (which has the pre-attached armrests and mechanism) with the top of the gas lift cylinder. Gently lower the seat onto the cylinder until it is securely seated.

3. Zamocuj oparcie:

   Align the backrest with the mounting brackets on the seat base. Secure the backrest using the provided screws and washers. Tighten all screws firmly with the Allen key, but do not overtighten.

   

   Rysunek 3: Tył view of the chair, highlighting the backrest design and sturdy construction.
4. Install Lumbar and Headrest Pillows:

   The lumbar pillow can be placed on the lower back of the chair for support. The magnetic headrest pillow attaches to the top of the backrest. Adjust their positions for personalized comfort.

   

   Rysunek 4: Szczegółowy view of the adjustable lumbar pillow and magnetic headrest, both made with memory foam for enhanced support.

Obsługa krzesła

The Diablo X-Ray Gaming Chair offers multiple adjustment options to customize your seating experience.

1. Seat Height Adjustment (Tilttech Butterfly System)

Aby wyregulować wysokość siedziska, należy znaleźć dźwignię po prawej stronie, pod siedziskiem.

• Aby podnieść siedzisko: Siedząc, unieś dźwignię i delikatnie oderwij się od siedziska. Siedzisko się podniesie. Puść dźwignię na żądanej wysokości.
• To lower the seat: While seated, lift the lever and apply downward pressure. The seat will lower. Release the lever at the desired height.

2. Backrest Recline (Tilttech Gear)

The backrest can be reclined independently. Locate the recline lever on the right side of the chair, near the backrest hinge.

• To recline: Pull the lever upwards and lean back to the desired angle. Release the lever to lock the backrest in place.
• To return to upright position: Pull the lever upwards and lean forward. The backrest will return to its upright position. Release the lever to lock.

3. Tilt Function (Tilttech Swing)

The chair features a rocking/tilt function for relaxation.

• To activate tilt: Pull the same lever used for height adjustment (on the right side, under the seat) outwards. The chair will now allow rocking motion.
• To lock tilt: Push the lever inwards. The chair will lock in its upright position.
• Tilt Tension Adjustment: The round knob located underneath the seat, at the front, controls the tension of the tilt mechanism. Turn clockwise to increase tension (harder to tilt), counter-clockwise to decrease tension (easier to tilt).

Rysunek 5: Strona view illustrating the Tilttech Swing mechanism, allowing for comfortable rocking and recline.

4. 4D Armrest Adjustment (Armtech Quatro SoftTouch)

The armrests can be adjusted in four dimensions for optimal support.

• Regulacja wysokości: Press the button on the side of the armrest support and move the armrest up or down. Release the button to lock.
• Naprzód wstecz: Przesuń podłokietnik do przodu lub do tyłu.
• Obrót w lewo/prawo: Swivel the armrest pad left or right.
• Inward/Outward: Slide the armrest pad inward or outward.

Rysunek 6: Szczegółowy view of the Armtech Quatro SoftTouch 4D armrests, highlighting their multi-directional adjustability.

5. Lumbar Support Adjustment (ProSpine Support)

The integrated lumbar support can be adjusted for personalized back comfort. Locate the knob on the side of the backrest.

• Turn the knob clockwise to increase the lumbar support (push it further out).
• Turn the knob counter-clockwise to decrease the lumbar support (retract it).

Konserwacja i pielęgnacja

Regular maintenance will help prolong the life and appearance of your Diablo X-Ray Gaming Chair.

• Czyszczenie: Do ogólnego czyszczenia przetrzyj krzesło miękką szmatką.amp cloth. For stains, use a mild soap solution and perform spot cleaning. Avoid harsh chemicals or abrasive cleaners, as they can damage the synthetic leather.
• Pielęgnacja materiałów: The chair features HDS synthetic leather and perforated HDS Air material. These materials are designed for durability and breathability. Avoid direct sunlight exposure for prolonged periods to prevent fading.
• Sprawdzenie sprzętu: Okresowo sprawdzaj dokręcenie wszystkich śrub i nakrętek. W razie potrzeby dokręć je.
• Caster Cleaning: Remove any hair or debris that may accumulate around the casters to ensure smooth rolling.

Figure 7: Close-up of the HDS Air perforated synthetic leather, designed for enhanced breathability and comfort.

Rozwiązywanie problemów

Jeśli napotkasz jakiekolwiek problemy z krzesłem, zapoznaj się z poniższymi, często spotykanymi problemami i ich rozwiązaniami.

Dane techniczne

Gwarancja i wsparcie

Your Diablo X-Ray Gaming Chair comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For technical support, replacement parts, or warranty claims, please contact Diablo customer service through their official webwitrynę lub sprzedawcę, u którego kupiłeś produkt.

Webstrona: www.diablochairs.com