Ostry SPC736

Instrukcja obsługi budzika SHARP Dual

Model: SPC736

1. Koniec produktuview

The SHARP SPC736 Dual Alarm Clock features a jumbo 1.8-inch white LED display with a faux wood finish, designed for clear visibility and a modern aesthetic. It includes dual alarm settings, a 3-step dimmer control for adjustable brightness, and a battery backup system to maintain time and alarm settings during power outagt.j.

SHARP SPC736 Dual Alarm Clock with 1.8-inch white LED display and faux wood finish, showing time 12:08 PM.

Obraz: Przód view of the SHARP SPC736 Dual Alarm Clock, displaying 12:08 PM. The clock features a large white LED display set against a faux wood grain panel, with control buttons visible on the top edge.

2. Konfiguracja

2.1 Zasilanie jednostki

The SHARP SPC736 alarm clock operates primarily on AC power. Connect the provided AC adapter to the clock and plug it into a standard electrical outlet.

2.2 Instalacja baterii zapasowej

For battery backup functionality, install 2 x AAA batteries (not included) into the battery compartment located on the bottom of the unit. The battery backup ensures that time and alarm settings are retained during a power interruption, though the display will not illuminate.

2.3 Ustawienie czasu początkowego

  1. Naciśnij i przytrzymaj USTAWIENIE CZASU button (usually indicated by a clock icon) until the display flashes.
  2. Użyj HR (Godzina) i MIN (Minute) buttons to adjust the time. Pay attention to the PM indicator for correct AM/PM setting.
  3. Naciśnij USTAWIENIE CZASU Naciśnij przycisk ponownie, aby potwierdzić i wyjść z trybu ustawiania czasu.

3. Instrukcja obsługi

3.1 Ustawianie alarmów (Alarm 1 i Alarm 2)

This clock features two independent alarms. Follow these steps for each alarm:

  1. Naciśnij i przytrzymaj ALARM 1 or ALARM 2 button (indicated by a bell icon) until the alarm time flashes.
  2. Użyj HR I MIN buttons to set the desired alarm time. Ensure the AM/PM indicator is correct.
  3. Naciśnij odpowiedni ALARM button again to confirm the setting. The alarm indicator will appear on the display.
  4. Aby aktywować/dezaktywować alarm, naciśnij przycisk ALARM 1 or ALARM 2 button briefly. The alarm indicator will turn on or off.

3.2 Funkcja drzemki

Gdy zabrzmi alarm, naciśnij duży przycisk DRZEMKA Przycisk znajdujący się na górze zegara. Alarm zostanie tymczasowo wyłączony i ponownie uruchomiony po około 9 minutach.

3.3 Dimmer Control

The clock features a 3-step dimmer control to adjust the brightness of the LED display. Repeatedly press the OPORNIK button (indicated by a sun icon) to cycle through high, medium, low, and off brightness settings.

4. Konserwacja

4.1 Czyszczenie

To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or display.

4.2 Wymiana baterii

Jeżeli zegar jest często wyłączanytages or if the display does not retain time during brief disconnections, it may be time to replace the AAA backup batteries. Ensure the clock is connected to AC power before replacing batteries to avoid losing current time settings.

5. Rozwiązywanie Problemów

ProblemMożliwa przyczynaRozwiązanie
Wyświetlacz jest pusty.No AC power; Dimmer set to 'off'.Ensure AC adapter is securely plugged in. Press the DIMMER button to cycle through brightness settings.
Alarm nie włącza się.Alarm not activated; Alarm volume too low (if applicable); Incorrect alarm time set.Verify alarm indicator is on. Check alarm time for AM/PM accuracy.
LED segments are dim or missing.LED component degradation over time.This may indicate a component failure. If within warranty, contact customer support. Otherwise, replacement may be necessary.
Czas/ustawienia utracone po wyłączeniu zasilaniatage.Baterie zapasowe są rozładowane lub nie zostały zainstalowane.Install new 2 x AAA batteries in the battery compartment.

6. Specyfikacje

  • Marka: Ostry
  • Model: SPC736
  • Typ wyświetlacza: Cyfrowa dioda LED
  • Rozmiar wyświetlacza: 1.8 inches (Jumbo)
  • Kolor wyświetlacza: Biały
  • Skończyć: Sztuczne drewno
  • Źródło zasilania: AC Powered with 2 x AAA Battery Backup (batteries not included)
  • Cechy szczególne: Dual Alarms, 3-Step Dimmer Control, Snooze Function
  • Wymiary: Około 8 x 5.6 x 3 cala
  • Waga: Około 12.8 uncji
  • Kod UPC: 049353000275

7. Gwarancja i wsparcie

For detailed warranty information and customer support, please refer to the documentation included with your product at the time of purchase or visit the official Sharp website. This manual provides general operational guidelines and does not supersede specific warranty terms.

Note: No official seller videos were available for embedding based on the provided data. For additional product demonstrations or support, please check the manufacturer's official channels.

© 2024 Sharp. Wszelkie prawa zastrzeżone.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.