Oświetlenie GE 93100348

GE Lighting LED+ Outdoor Security Flood Light Bulb

Model 93100348: Motion Sensor, Dusk-to-Dawn, Warm White

Wstęp

This manual provides instructions for the installation, operation, and maintenance of your GE Lighting LED+ Outdoor Security Flood Light Bulb. This LED bulb features integrated motion sensing and dusk-to-dawn functionality, designed for outdoor security and convenience.

GE LED+ Outdoor Security Flood Light Bulb with features highlighted

Image: The GE LED+ Outdoor Security Flood Light Bulb, showcasing its design and key features like 'Linkable Motion System' and 'Dusk to Dawn' setting.

Konfiguracja i instalacja

  1. Wyłączone: Przed montażem należy upewnić się, że zasilanie oprawy oświetleniowej jest wyłączone na wyłączniku automatycznym, aby zapobiec porażeniu prądem.
  2. Select Fixture: This bulb is designed for outdoor use in fixtures with an E26 medium base. Ensure the fixture is rated for the bulb's wattagi (15W).
  3. Zainstaluj żarówkę: Carefully screw the GE LED+ bulb into the E26 medium base socket until snug. Do not overtighten.
  4. Włączanie: Restore power to the light fixture from the circuit breaker. The bulb will perform an initial self-test.
  5. Pozycjonowanie: For optimal motion detection, position the fixture so the bulb's sensor has a clear line of sight to the area you wish to monitor. Avoid obstructions.

Ważna uwaga: This bulb is nie compatible with dimmer switches. Using it with a dimmer switch may cause malfunction or damage.

Diagram showing dimensions of an E26 Medium Base bulb

Image: A diagram illustrating the dimensions of a standard E26 Medium Base, indicating it is the most common base size.

Instrukcja obsługi

The GE LED+ Outdoor Security Flood Light Bulb operates automatically based on ambient light levels and motion detection.

  • Funkcja od zmierzchu do świtu: The integrated sensor detects ambient light. When it gets dark, the bulb will automatically illuminate at 50% brightness. It will remain at this level until dawn, when it will turn off.
  • Detekcja ruchu: When motion is detected during the dusk-to-dawn operating period, the bulb will increase its illumination to 100% brightness for approximately 3 minutes. After 3 minutes of no further motion, it will return to 50% brightness.
  • System łączony: This bulb can be linked with up to 30 other compatible GE LED+ Linkable Motion bulbs or fixtures to create a synchronized security lighting system. When motion triggers one linked bulb, all linked bulbs will activate to 100% brightness for 3 minutes. Refer to the product packaging or GE Lighting website for specific linking instructions if not provided here.
Side-by-side comparison of a porch light before and after motion detection

Image: A visual representation of the bulb's motion detection feature, showing a porch dimly lit before motion and brightly illuminated after a person walks by.

Nad głową view of a house and driveway illuminated by multiple linked security lights

Zdjęcie: Zdjęcie lotnicze view demonstrating the linkable motion system, where multiple bulbs illuminate a large outdoor area simultaneously upon detection of motion.

Konserwacja

  • Czyszczenie: Ensure power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Wymiana żarówki: The bulb has an estimated life of 15,000 hours. When the bulb reaches the end of its life, replace it with a new compatible GE LED+ Outdoor Security Flood Light Bulb.

Rozwiązywanie problemów

ProblemMożliwa przyczynaRozwiązanie
Bulb does not turn on at night.No power to fixture; ambient light too high; faulty bulb.Check circuit breaker. Ensure fixture is not obstructed by other light sources. Replace bulb if necessary.
Bulb stays at 100% brightness constantly.Constant motion detected; sensor obstructed; bulb in a fixture with a dimmer.Ensure no continuous motion in sensor's range. Clear any obstructions from the sensor. Nie stosować z przełącznikami ściemniającymi.
Bulb does not dim to 50% at night.Constant motion detected; sensor obstructed.Verify no motion is continuously triggering the sensor. Ensure the sensor is clear of debris or obstructions.
Linked bulbs do not activate together.Bulbs out of range; linking not properly established.Ensure linked bulbs are within the specified communication range. Refer to linking instructions on product packaging or GE Lighting webstrona.

Specyfikacje

FunkcjaSpecyfikacja
Numer modelu93100348
Typ źródła światłaPROWADZONY
Jasność1200 lumenów
Temperatura barwowa3000K (ciepła biel)
Cotage15 Watts (90-Watt Replacement)
Tomtage120 wolty
Podstawa żarówkiE26 średni
Możliwość ściemnianiaNIE
Ocenione życie15,000 godzin
Szacowany koszt energii1.81 dolara rocznie
Zastosowanie wewnątrz/na zewnątrzPlenerowy
Cechy specjalneDawn-To-Dusk, Motion Sensor, Linkable
Wymiary produktu6" dł. x 3.8" szer. x 3.8" wys.
TworzywoPlastikowy

Gwarancja i wsparcie

This product is covered by a manufacturer's warranty. For detailed warranty information, please refer to the documentation included with your purchase or visit the official GE Lighting webstrona.

Aby uzyskać dalszą pomoc, wsparcie techniczne lub view additional products, please visit the GE Lighting Store on Amazon or the official GE Lighting webstrona.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.