A. O. Smith AO-US-200

A. O. Smith AO-US-200 2-Stage System filtra wody pod zlewem

Instrukcja obsługi

Wstęp

This manual provides comprehensive instructions for the installation, operation, and maintenance of your A. O. Smith AO-US-200 2-Stage Under Sink Water Filter System. Please read all instructions carefully before beginning installation or use to ensure proper function and safety. This system is designed to provide clean, filtered drinking water directly from a dedicated faucet.

Ważne informacje dotyczące bezpieczeństwa

Always follow basic safety precautions when installing or maintaining this product to reduce the risk of fire, electric shock, or injury to persons. Keep this manual for future reference.

  • Przed instalacją należy wyłączyć dopływ wody.
  • Do not install the system where it will be exposed to freezing temperatures.
  • Upewnij się, że wszystkie połączenia są solidne, aby zapobiec wyciekom.
  • Use only genuine A. O. Smith replacement filters.

Co jest w pudełku

Przed rozpoczęciem instalacji sprawdź, czy wszystkie komponenty są obecne:

  • AO-US-200 Filter Unit
  • Kran
  • Filter Cartridge Set (2 cartridges)
  • Klucz
  • Rury
  • 1/4" Brass Tee
  • Mounting Screws with Anchors
  • Faucet Installation Hardware (spacers, nuts, washers)
Diagram showing all components included in the AO Smith AO-US-200 water filter system box: filter unit, faucet, two filter cartridges, and a wrench.
Figure 1: Included Components of the AO-US-200 System

Specyfikacje

Funkcja Szczegół
Numer modelu AO-US-200
Filtracja Stages 2-Stage Claryum Filtration
Żywotność filtra 6 months / 500 Gallons
Redukcja zanieczyszczeń Reduces up to 99% of 78 contaminants including Lead, PFAS, Chlorine, Mercury, Asbestos, Pharmaceuticals, Chloramine
Certyfikaty NSF/ANSI Standards 42, 53, and 401 (WQA Tested & Certified)
Przepływ 0.5 galona na minutę
Tworzywo Blok węglowy
Wymiary (w przybliżeniu) Wysokość: 9 cala (22.9 cm), szerokość: 8.25 cala (21 cm), głębokość: 4.25 cala (10.2 cm)
Diagram showing the dimensions of the AO Smith 2-stage water filter system, including height, width, and depth measurements.
Figure 2: System Dimensions

Konfiguracja i instalacja

1. Lista kontrolna przed instalacją

  • Wymagane narzędzia: Adjustable wrench, measuring tape, pencil, Phillips head screwdriver, hammer, variable speed drill with 7/32" bit, level.
  • Lokalizacja: Select a space under your sink that is at least 12 inches from the bottom of your cabinet and allows for easy access to a cold water supply line.
  • Umiejscowienie kranu: The dedicated faucet may be mounted on the sink using an existing hole (e.g., for a sprayer nozzle or soap dispenser) or by drilling a new hole no more than 1/2 inch in diameter. Ensure the faucet's spout extends slightly past the edge of the sink. Uwaga: Jeśli konieczne jest wiercenie, zalecamy skorzystanie z usług zatwierdzonego lub certyfikowanego fachowca.

2. Connecting to Cold Water Supply

  1. Zakręć dopływ zimnej wody do zlewu.
  2. Disconnect the cold water supply line from the shut-off valve.
  3. Attach the threaded end of the 1/4" brass tee to the cold water shut-off valve.
  4. Connect the cold water supply line to the top of the brass tee.
  5. Tighten all connections using an adjustable wrench.

3. Montaż kranu

  1. Insert the faucet stem through the chosen hole in your sink.
  2. From underneath the sink, slide the faucet rubber washer, faucet washer, and faucet spacer onto the faucet stem.
  3. Secure the faucet with the faucet nut, tightening it with a wrench to ensure it is secure to the sink.

4. Mounting the Filter Unit

  1. Temporarily position the filter unit under the sink in your chosen location.
  2. Otwory montażowe zaznaczyć ołówkiem.
  3. Drill pilot holes at the marked locations. If mounting into drywall, insert the provided drywall anchors.
  4. Mount the unit to the wall using the provided screws.
Diagram illustrating the DIY installation process for an under-sink water filter system, showing connections to the cold water line and faucet.
Figure 3: Do-It-Yourself Installation Overview
An under-counter view of the installed AO Smith water filtration system, showing the filter unit and associated plumbing beneath a kitchen sink.
Figure 4: Under-Counter Installation Example

5. Węże łączące

  1. Connect one end of the provided tubing to the open port on the brass tee. Ensure the plastic tube insert and brass nut are correctly installed for a secure, leak-free connection.
  2. Insert the other end of this tubing completely into the 'IN' port of the filter unit.
  3. Connect another piece of tubing to the faucet stem. Ensure the chrome nut and plastic collar are correctly installed.
  4. Insert the other end of this tubing completely into the 'OUT' port of the filter unit.

6. Initial System Flush

  1. Powoli odkręć dopływ zimnej wody.
  2. Open the dedicated filtered water faucet and allow water to run for 10 minutes to flush the system. This removes air and carbon fines.
  3. Sprawdź szczelność wszystkich połączeń. W razie potrzeby dokręć.

Video 1: Official A. O. Smith AO-US-200 Installation Guide. This video provides a visual walkthrough of the installation process for the 2-stage under sink water filter system.

Obsługa systemu

Once installed and flushed, your A. O. Smith AO-US-200 system is ready for use. Simply open the dedicated filtered water faucet to dispense clean, filtered water. The system filters water at a rate of 0.5 gallons per minute, suitable for families of 1 to 4 people.

Konserwacja: Wymiana filtra

For optimal performance, replace your filter cartridges every 6 months or after 500 gallons of use, whichever comes first. The system is designed for easy, tool-free filter replacement.

Technologia filtracji

Diagram illustrating how the 2-stage Claryum filtration system works, showing water flowing through two filter cartridges.
Figure 5: How the 2-Stage Claryum Filtration Works
Diagram detailing the Claryum filtration technology, showing activated carbon, catalytic carbon, ion-exchange, and absolute sub-micron mechanical filtration layers.
Figure 6: Claryum Filtration Technology Details

Etapy wymiany filtra

  1. Turn off the cold water supply to the system.
  2. Open the filtered water faucet to relieve pressure and drain any remaining water.
  3. Twist the old filter cartridges counter-clockwise to remove them from the unit housing.
  4. Discard the old filters.
  5. Insert new filter cartridges into the unit housing, aligning the connection points.
  6. Push the new filters up and twist clockwise until they are securely locked into place.
  7. Powoli odkręć dopływ zimnej wody.
  8. Open the filtered water faucet and allow water to run for 10 minutes to flush the new filters.
  9. Sprawdź, czy nie ma wycieków.
Pro tips for easy installation and filter replacement, including advice on not over-tightening sumps, inserting tubing completely, wetting tube ends, and noting that the system does not reduce TDS.
Figure 7: Pro Tips for Installation and Filter Replacement

Rozwiązywanie problemów

Problem Możliwa przyczyna Rozwiązanie
Wycieki na połączeniach Loose fittings, missing O-rings, improper tubing insertion. Ensure all nuts are tightened, check for properly seated O-rings, re-insert tubing fully into quick-connect fittings. Using plumber's tape on threaded connections can help.
Niski przepływ wody z kranu Clogged filters, kinked tubing, low incoming water pressure. Replace filters if they are past their service life. Check tubing for kinks. Verify adequate household water pressure.
Unpleasant taste/odor Filters are exhausted, initial carbon fines not fully flushed. Replace filters. Flush the system for an extended period (e.g., 15-20 minutes) after filter replacement.
Filter change indicator not working Należy wymienić baterię. Replace the battery in the filter unit's indicator.

Informacje o gwarancji

A. O. Smith provides a limited warranty for this product. Please refer to the warranty card included with your purchase or visit the official A. O. Smith webSzczegółowe warunki i zasady znajdziesz na stronie. Zachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.

Obsługa klienta

If you have any questions, require assistance with installation, or need to order replacement parts, please contact A. O. Smith Customer Support:

  • Webstrona: www.aosmith.com
  • Telefon: Refer to your product packaging or the A. O. Smith webstrona z najnowszymi numerami kontaktowymi.

© 2024 A. O. Smith. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.