VGEBY Universal Speedometer Magnet Instruction Manual

1. Koniec produktuview

The VGEBY Universal Speedometer Magnet is designed to work with various bicycle cycling computers and odometers. It serves as a replacement or an initial component for accurate speed and distance tracking.

• Trwała konstrukcja: Manufactured from high-quality plastic, metal, and magnet materials for long-lasting performance.
• Uniwersalna kompatybilność: Designed to be compatible with a wide range of bicycle computer brands, making it a versatile replacement part.
• Łatwa instalacja: Features a design suitable for various spoke specifications, ensuring straightforward and secure attachment.
• Enhanced Cycling Data: Facilitates precise data collection for speed and distance, supporting more scientific and efficient cycling training.

2. składniki

The VGEBY Universal Speedometer Magnet consists of the following parts:

• Magnet unit with textured edge
• Śruba montażowa
• Plastic housing for spoke attachment

Figure 2.1: Individual components of the magnet, including the metal screw and plastic housing.

Figure 2.2: Dimensions of the speedometer magnet.

3. Konfiguracja i instalacja

Follow these steps to properly install the speedometer magnet on your bicycle spoke:

1. Identify a suitable spoke on your bicycle wheel, typically on the front wheel.
2. Position the plastic housing of the magnet around the chosen spoke.
3. Insert the metal screw through the designated hole in the plastic housing and into the magnet unit.
4. Tighten the screw by hand until the magnet is securely fastened to the spoke. Ensure it is firm but do not overtighten to avoid damaging the plastic housing.
5. Adjust the magnet's position on the spoke so that it aligns with your bicycle computer's sensor. The gap between the magnet and the sensor should be minimal, typically a few millimeters, for accurate readings.

Figure 3.1: Magnet installed on a bicycle spoke.

Figure 3.2: Magnet positioned near a bicycle computer sensor.

4. Działanie

The speedometer magnet works in conjunction with a bicycle computer sensor. As the wheel rotates, the magnet passes by the sensor, generating a signal that the computer interprets to calculate speed and distance. No direct user operation is required for the magnet itself once installed correctly.

5. Konserwacja

To ensure optimal performance and longevity of your speedometer magnet:

• Regularne czyszczenie: Periodically wipe the magnet and its housing with a damp Ściereczką usuń brud i zanieczyszczenia. Unikaj silnych środków chemicznych.
• Sprawdź szczelność: Routinely inspect the mounting screw to ensure the magnet remains securely attached to the spoke. Tighten if necessary, but do not overtighten.
• Sprawdź, czy nie ma uszkodzeń: Check the plastic housing for any cracks or damage that could affect its secure fit or the magnet's position.

6. Rozwiązywanie Problemów

If your bicycle computer is not registering speed or distance, consider the following:

• Brak czytania: Ensure the magnet is correctly aligned with the sensor on your bicycle computer. The gap between the magnet and sensor should be small (typically 1-5mm). Adjust the magnet or sensor position as needed.
• Odczyty przerywane: Check if the magnet is loose on the spoke. Tighten the mounting screw if it has become loose. Also, verify that the sensor itself is securely mounted and not shifting.
• Utrata magnesu: If the magnet has fallen off, a replacement unit will be required.

7. Specyfikacje

8. Oficjalne filmy o produktach

9. Gwarancja i wsparcie

VGEBY offers a 180-day return and refund policy for this product if you are not satisfied. For any product-related issues or inquiries, please contact VGEBY customer support via email. They aim to respond promptly to assist you.