Sunco Lighting SHW-40W-5K-2PK

Sunco LED Wraparound Shop Light Instruction Manual

Model: SHW-40W-5K-2PK | Brand: Sunco Lighting

Wstęp

Thank you for choosing the Sunco LED Wraparound Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.

Informacje dotyczące bezpieczeństwa

  • OSTRZEŻENIE: Ryzyko porażenia prądem. Przed instalacją lub serwisowaniem należy odłączyć zasilanie za pomocą bezpiecznika lub wyłącznika automatycznego.
  • Produkt ten musi zostać zainstalowany zgodnie z obowiązującymi przepisami instalacyjnymi. Montażu powinna dokonać osoba zaznajomiona z konstrukcją i działaniem produktu oraz związanymi z tym zagrożeniami.
  • Zapewnij objętość podażytage is compatible with the fixture (120-277V).
  • Nie dotykaj przewodów pod napięciem.
  • Nie modyfikuj urządzenia. Wszelkie modyfikacje mogą unieważnić gwarancję i stwarzać zagrożenie dla bezpieczeństwa.
  • Nadaje się do damp lokalizacje.

Zawartość opakowania

Przed rozpoczęciem instalacji sprawdź, czy wszystkie komponenty są obecne:

  • LED Wraparound Shop Light Fixture (2 units for 2-pack)
  • Sprzęt montażowy
  • Linking Cables (for connecting multiple fixtures)
  • Instrukcja obsługi

Specyfikacje

Numer modeluSHW-40W-5K-2PK
Pobór mocy40 watów
Moc światła3500 lumenów
Temperatura barwowa5000K Światło dzienne
Tomtage120-277 V
Wymiary48" dł. x 5.35" szer. x 2.36" wys.
Kąt wiązki110 stopni
CRI80+
Typ instalacjiFlush Mount / Hardwired
Cechy specjalnePrismatic Lens, Linkable (up to 8 units), Non-Dimmable
CertyfikatyETL

Instrukcje instalacji

This fixture is designed for direct surface mounting to the ceiling. Always ensure power is disconnected before starting installation.

  1. Przygotuj oprawę: Carefully remove the diffuser (Part B) from the lamp base (Part A) to access the wiring and mounting points.
  2. Zamontuj oprawę: Pozycja lamp base against the ceiling where you intend to install it. Mark the mounting holes. Use appropriate mounting hardware (screws, anchors) to securely attach the lamp base to the ceiling.
  3. Okablowanie: Bring the electrical supply wires from the junction box to the fixture. Connect the wires according to local electrical codes: Black to Black (Live), White to White (Neutral), Green/Bare Copper to Green (Ground). Ensure all connections are secure with wire nuts.
  4. Replace Diffuser: Once wiring is complete and secure, carefully reattach the diffuser to the lamp base. Ensure it snaps firmly into place along both sides.

Łączenie wielu urządzeń

These fixtures are linkable, allowing you to connect up to 8 units from a single power source. Use the provided linking cables or flush linking connectors to connect fixtures end-to-end. Ensure the total wattagliczba połączonych urządzeń nie przekracza pojemności obwodu.

Diagram showing three steps for easy installation: removing diffuser, wiring, and reattaching diffuser and mounting.
Rysunek 1: Łatwe kroki instalacji. This image illustrates the three primary steps for installing the Sunco LED Wraparound Shop Light: 1. Removing the diffuser (Part B) from the lamp base (Part A). 2. Connecting the electrical wires from the fixture to the junction box. 3. Replacing the diffuser and mounting the shop light directly onto the ceiling or wall.
Diagram showing two methods of linking multiple shop lights: using an 8-inch linking cable and a 1.5-inch flush linking connector.
Figure 2: Daisy Chain Linkability. This diagram demonstrates how to connect multiple Sunco LED shop lights. The top illustration shows connecting lights using an 8-inch linking cable, while the bottom shows a 1.5-inch flush linking connector for a seamless, continuous appearance. Up to 8 lights can be connected to a single power source.

Działanie

Once properly installed and powered, the Sunco LED Wraparound Shop Light will provide instant-on, flicker-free illumination. This fixture is non-dimmable and operates at a 5000K Daylight color temperature, designed to mimic natural daylight for enhanced visibility and alertness.

Image showing a person holding a smartphone displaying a brightly lit room, with an inset graphic highlighting 'Instant-on Technology' and 'Flicker-Free Lights'.
Figure 3: Flicker-Free Lights. The fixture features instant-on technology and provides flicker-free illumination, which helps minimize eye strain and fatigue, improving visual comfort in various environments.
Image of a parking garage with a blue car, highlighting the 5000K Daylight color temperature of the lights, with an inset showing the light source.
Figure 4: 5000K Daylight. The 5000K Daylight color temperature mimics natural daylight indoors, promoting alertness and enhancing visibility, making it ideal for workshops, garages, and other utility spaces.

Konserwacja

The Sunco LED Wraparound Shop Light is designed for long-lasting performance with minimal maintenance. The integrated LED design means there are no bulbs to replace.

  • Czyszczenie: Ensure power is off before cleaning. Wipe the fixture and diffuser with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or optical components.
  • Kontrola: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and contact a qualified electrician or Sunco Lighting support.
Text 'Never change a tube again!' with icons for 110-degree wide beam angle and 45+ years lifespan, set against an image of a modern office with many ceiling lights.
Figure 5: Long Lifespan. Designed to last over 45+ years under typical usage conditions, eliminating the need for frequent bulb replacements.

Rozwiązywanie problemów

If you experience issues with your Sunco LED Wraparound Shop Light, refer to the following common problems and solutions:

ProblemMożliwa przyczynaRozwiązanie
Światło się nie włączaBrak zasilania; Luźne okablowanie; Wadliwe wyposażenie.Check circuit breaker/fuse. Ensure all wire connections are secure. If problem persists, contact Sunco support.
Światło jest słabe lub migoczeIncompatible dimmer switch (fixture is non-dimmable); Loose wiring; Power fluctuation; Fixture nearing end of life.Ensure no dimmer switch is used. Check wiring connections. If dimming occurs after extended use (e.g., 1.5-2 years), it may indicate a component issue. Contact Sunco support for warranty assistance.
Only some linked lights are workingLoose linking cable connection; Faulty individual fixture in the chain.Check all linking cable connections. Isolate the non-working fixture to determine if it's an individual unit issue.

Jeśli wykonanie powyższych czynności nie pomoże, skontaktuj się z działem obsługi klienta Sunco Lighting.

Gwarancja i wsparcie

Sunco Lighting stands behind the quality of its products. This LED Wraparound Shop Light comes with a Ochrona 7-roczna warranty. For warranty claims, technical assistance, or any questions regarding your product, please contact our knowledgeable support specialists.

Informacje kontaktowe: Please refer to the Sunco Lighting webAby uzyskać najaktualniejsze dane kontaktowe, odwiedź witrynę lub dokumentację zakupu.

Video: Get to know Sunco. This official video from Sunco Lighting provides an overview of the company's commitment to quality, product testing, and customer service, highlighting their dedication to customer satisfaction and product reliability.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.