Elitech LogEt 8 BLE Bluetooth Wireless Data Logger User Manual

1. Koniec produktuview

The Elitech LogEt 8 BLE is a Bluetooth wireless multi-use PDF data logger designed for monitoring temperature in various life science applications. It features a USB port for direct data download and PDF report generation, and Bluetooth connectivity for remote management via the Elitech App.

Główne cechy:

• Bezprzewodowa technologia Bluetooth: Enables one-click pairing and remote programming/management via the Elitech App within meters.
• Szeroki zakres pomiaru temperatury: -22℉ to 158℉ (-30℃ to 70℃) with an accuracy of ±0.9℉ (±0.5℃).
• Zgodność z aplikacją mobilną: Free Elitech App for iOS and Android devices facilitates remote logger management and cold chain monitoring.
• Multi-use Capability: Designed for repeated use over approximately 2 years under room temperature conditions.
• Automatyczna synchronizacja danych: Automatically uploads all recorded data to your account when connected to the Elitech APP.
• High Recording Capacity: Stores up to 16,000 recording points.

Rycina 1: Przód view of the LogEt 8 BLE data logger with labeled components.

2. Zawartość opakowania

Sprawdź, czy po rozpakowaniu w opakowaniu znajdują się wszystkie elementy:

• 1 x LogEt 8 BLE Data Logger
• 1 x Instrukcja obsługi
• 1 x certyfikat kalibracji

Figure 2: Contents included in the LogEt 8 BLE package.

3. Komponenty urządzenia

Familiarize yourself with the main components of the LogEt 8 BLE data logger:

• Port USB: Located at the top, protected by a removable cap. Used for direct connection to a computer for data download and configuration.
• Ekran LCD: Displays current temperature, alarm status, recording status, and battery level.
• Przycisk Start: Initiates data recording.
• Przycisk stopu: Halts data recording.
• Embedded Temperature Sensor: Internal sensor for accurate temperature measurement.

4. Konfiguracja

4.1 Konfiguracja początkowa

1. Rozpakuj urządzenie: Carefully remove the LogEt 8 BLE from its packaging.
2. Sprawdź, czy nie ma uszkodzeń: Check the device for any visible damage. If damaged, contact customer support.
3. Aktywacja baterii: The device comes with a pre-installed lithium metal battery. No initial activation is typically required.

4.2 Software Installation (Elitech App)

To fully utilize the LogEt 8 BLE's features, download the Elitech App on your mobile device:

• Szukaj "Elitech" in the Apple App Store (for iOS) or Google Play Store (for Android).
• Download and install the official Elitech App.
• Utwórz konto lub zaloguj się, jeśli już je posiadasz.

4.3 Łączenie przez Bluetooth

Po zainstalowaniu aplikacji:

1. Upewnij się, że Bluetooth jest włączony w Twoim urządzeniu mobilnym.
2. Open the Elitech App.
3. The app will scan for nearby Elitech data loggers. Select your LogEt 8 BLE from the list to pair.
4. Follow any on-screen prompts for one-click pairing.

4.4 Programming the Logger

Before starting a recording, configure the logger's parameters using the Elitech App or by connecting directly to a computer via USB:

• Via Elitech App: Within the app, navigate to the settings for your connected LogEt 8 BLE. You can set parameters such as sampling interval, alarm thresholds, start delay, and recording duration.
• Via USB (PC Software): Remove the protective cap to expose the USB port. Connect the logger to a computer. Use the Elitech data management software (downloadable from the Elitech website) to configure settings.

Figure 3: Default parameters sticker on the side of the device.

5. Instrukcja obsługi

5.1 Rozpoczęcie nagrywania

To begin data logging:

• Naciśnij i przytrzymaj START button for approximately 3 seconds until the "REC" indicator appears on the LCD screen.
• If a start delay was configured, the logger will begin recording after the specified delay.

5.2 Zatrzymywanie nagrywania

To end data logging:

• Naciśnij i przytrzymaj ZATRZYMYWAĆ SIĘ button for approximately 3 seconds until the "END" indicator appears on the LCD screen.
• Alternatively, connect the logger to the Elitech App or PC software and select the option to stop recording.

5.3 Data Download and Report Generation

After recording, data can be retrieved and analyzed:

• Przez USB: Remove the USB cap and plug the logger into a computer's USB port. The logger will automatically generate a PDF report and a CSV data file. Te files can be accessed directly from the logger's virtual drive.
• Via Elitech App: Connect the logger to the Elitech App via Bluetooth. The app will automatically sync and upload all data to your account. You can then view graphs, export data, or generate reports directly from the app.

Figure 4: LogEt 8 BLE with USB port exposed and key specifications.

6. Konserwacja

6.1 Informacje o baterii

The LogEt 8 BLE is powered by a non-rechargeable lithium metal battery. The battery is designed to last for approximately 2 years under normal operating conditions. The battery is contained within the equipment and is not user-serviceable. Attempting to replace the battery may damage the device and void the warranty.

6.2 Czyszczenie

Aby wyczyścić urządzenie:

• Wytrzyj obudowę miękką, suchą szmatką.
• Nie należy używać środków czyszczących o właściwościach ściernych ani rozpuszczalników. Nie należy również zanurzać urządzenia w wodzie.

6.3 Przechowywanie

When not in use, store the data logger in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Rozwiązywanie Problemów

If you encounter issues with your LogEt 8 BLE, refer to the following common problems and solutions:

• Urządzenie nie włącza się: Check battery level on the LCD. If the battery is depleted, the device may need replacement as the battery is not user-serviceable.
• Nie można połączyć się przez Bluetooth: Ensure Bluetooth is enabled on your mobile device and the Elitech App is open. Make sure the logger is within range. Restart both the logger and your mobile device.
• Brak zarejestrowanych danych: Verify that recording was properly started (check for "REC" on LCD). Ensure the logger's memory is not full.
• PDF report not generated: Ensure the logger is connected to a computer's USB port correctly. Try a different USB port or computer. Ensure the USB cap is fully removed.
• Niedokładne odczyty: Ensure the logger's sensor is not obstructed and is placed in an environment suitable for its operating range.

For further assistance, contact Elitech customer support.

8. Specyfikacje

9. Gwarancja i wsparcie

9.1 Informacje o gwarancji

Elitech products typically come with a limited warranty covering manufacturing defects. Please refer to the warranty card included in your package or visit the official Elitech website for specific warranty terms and conditions applicable to the LogEt 8 BLE.

9.2 Obsługa klienta

For technical support, troubleshooting assistance, or warranty claims, please contact Elitech customer service:

• Webstrona: Odwiedzać www.elitechus.com Aby uzyskać odpowiedzi na często zadawane pytania, pobrać oprogramowanie i uzyskać informacje kontaktowe.
• E-mail/Telefon: Refer to the Elitech webAby uzyskać aktualne dane kontaktowe, odwiedź witrynę lub opakowanie produktu.