Instrukcja obsługi mikroskopu dwuokularowego Motic BA310E Series Elite LED

Wstęp

This manual provides comprehensive instructions for the safe and effective use of your Motic BA310E Series Elite LED Binocular Compound Microscope. The BA310E is an advanced upright microscope designed for routine work in educational, clinical, and laboratory settings, offering quality optical performance for various life science and medical applications. It features a full Koehler configuration for optimal illumination and supports additional contrast methods such as Phase contrast, Polarization, and Dark field.

Informacje dotyczące bezpieczeństwa

• Zawsze obchodź się z mikroskopem ostrożnie. Unikaj gwałtownych ruchów i uderzeń.
• Upewnij się, że mikroskop jest umieszczony na stabilnej i równej powierzchni, aby zapobiec jego przewróceniu.
• Use only the specified power adapter and connect to a grounded outlet.
• Do not expose the microscope to direct sunlight, high temperatures, or excessive humidity.
• Unplug the microscope before cleaning or performing any maintenance.
• Keep liquids away from the electrical components.
• Nie próbuj samodzielnie demontować ani naprawiać mikroskopu. Skontaktuj się z wykwalifikowanym personelem serwisowym.

Zawartość opakowania

Po rozpakowaniu należy sprawdzić, czy wszystkie elementy są obecne:

• Motic BA310E Series Elite LED Binocular Compound Microscope (Main Unit)
• Przewód zasilający
• Osłona przeciwpyłowa
• Instrukcja obsługi (ten dokument)
• (Additional accessories may vary by specific package)

Organizować coś

1. Rozpakowywanie: Carefully remove the microscope and all accessories from the packaging. Retain the original packaging for future transport or storage.
2. Umieszczenie: Place the microscope on a stable, vibration-free surface away from direct sunlight and heat sources. Ensure adequate ventilation.
3. Montaż okularu: Insert the eyepieces into the binocular head tubes. Secure them if necessary according to the head's design.
4. Cel instalacji: Rotate the revolving nosepiece to allow space for objective installation. Carefully screw each objective lens into the nosepiece in ascending order of magnification (e.g., 4x, 10x, 40x, 100x).
5. Podłączenie zasilania: Connect the power cord to the microscope's power input and then to a grounded electrical outlet.

Rysunek 1: The Motic BA310E Series Elite LED Binocular Compound Microscope. This image displays the complete microscope unit, highlighting the binocular head, revolving nosepiece with objective lenses, mechanical stage, and illumination system.

Instrukcja obsługi

1. Włączanie: Flip the power switch located on the side of the microscope to the 'ON' position. The LED illumination should light up.
2. Dostosuj oświetlenie: Use the intensity control knob to adjust the brightness of the LED light source to a comfortable level.
3. Umieść próbkę: Umieść przygotowany preparat w urządzeniu mechanicznymtage, zabezpieczając go za pomocą stagklipy elektroniczne.
4. Select Objective: Rotate the revolving nosepiece to select the lowest power objective lens (e.g., 4x or 10x). Ensure it clicks firmly into place.
5. Skupienie:
   • Look through the eyepieces.
   • Use the coarse focus knob to bring the specimen into approximate focus.
   • Use the fine focus knob for precise focusing and to achieve a sharp image.
6. StagRuch: Użyj XYtage control knobs to move the specimen slide horizontally and vertically across the field of view.
7. Adjusting Interpupillary Distance and Diopter:
   • Adjust the distance between the eyepieces until you see a single, circular field of view.
   • If one eyepiece has a diopter adjustment ring, focus with the non-adjustable eyepiece first, then adjust the diopter ring on the other eyepiece until both eyes see a sharp image.
8. Zmiana powiększenia: Rotate the nosepiece to a higher power objective. Use only the fine focus knob to refocus. The BA310E features Infinity Corrected CCIS Plan Achromatic objectives, minimizing the need for extensive refocusing when changing objectives.
9. Koehler Illumination: The BA310E's full Koehler configuration allows for optimal illumination. Adjust the field diaphragm and aperture diaphragm for even illumination and maximum contrast. Refer to advanced microscopy texts for detailed Koehler setup.
10. Wyłączone: When finished, turn off the illumination, remove the specimen slide, and cover the microscope with the dust cover.

Konserwacja

• Czyszczenie optyki: Use a soft, lint-free cloth or lens paper specifically designed for optics. For stubborn smudges, use a small amount of lens cleaning solution. Avoid touching optical surfaces with bare fingers.
• Czyszczenie ciała: Przetrzyj korpus mikroskopu miękką,amp płótno. Nie używaj ostrych środków chemicznych ani ściernych środków czyszczących.
• Składowanie: Always cover the microscope with the provided dust cover when not in use. Store in a cool, dry place.
• Smarowanie: Moving parts are factory-lubricated. Do not attempt to lubricate them yourself.

Rozwiązywanie problemów

Specyfikacje

Gwarancja i wsparcie

For warranty information, technical support, or service inquiries, please contact Motic customer service or your authorized Motic dealer. Keep your purchase receipt and model number (1100100402632) readily available when contacting support.

Producent: Motyczny

Data pierwszej dostępności: 15 czerwca 2017 r.