Amazon Basics AC Powered PC Multimedia External Speakers

Wstęp

Thank you for choosing the Amazon Basics AC Powered PC Multimedia External Speakers. These speakers are designed to provide clear stereo sound for your computer, laptop, or other audio devices. This manual provides essential information for setting up, operating, and maintaining your new speakers.

Produkt ponadview

The Amazon Basics AC Powered PC Multimedia External Speakers feature dual 2.5-inch drivers per speaker, delivering 7 watts of total RMS power (3.5 watts per speaker) with a frequency range of 57 Hz - 20 KHz. They are designed for easy plug-and-play functionality and offer convenient controls.

Główne cechy:

• AC-powered (13W) for consistent performance.
• Dual 2.5-inch drivers per speaker for stereo sound.
• Easy-access volume control with On/Standby function.
• Plug and play setup via 3.5mm audio jack.
• Connects up to 2 devices simultaneously (3.5mm audio input plus auxiliary line).
• Built-in headphone jack for private listening.

Zawartość pudełka:

• 2 x Amazon Basics PC Multimedia Speakers

Organizować coś

Follow these steps to set up your speakers:

1. Pozycjonowanie głośników: Place the speakers on a flat, stable surface on either side of your computer monitor or laptop for optimal stereo separation.
2. Podłącz zasilanie: Plug the AC power cord from the speaker into a standard wall electrical outlet. The speakers are AC-powered and require a direct connection to a power source.
   

   Obraz: szczegółowy view of the standard AC power plug, which connects the speakers to a wall outlet for power.

   

   Image: One of the speakers with its power cable plugged directly into a wall electrical outlet.
3. Podłącz dźwięk: Plug the 3.5mm audio jack from the speaker into the headphone or audio output port of your computer, laptop, smartphone, tablet, or MP3 player.
   

   Image: The speakers set up next to a laptop, demonstrating the audio cable connected to the laptop's audio output jack.

4. Włączanie: Turn the volume knob clockwise to power on the speakers. A blue LED indicator will illuminate when the speakers are on.

Instrukcja obsługi

Once set up, operating your speakers is straightforward:

• Regulacja głośności: Use the large knob on the front of the primary speaker to adjust the volume. Turn clockwise to increase volume and counter-clockwise to decrease it. This knob also functions as the On/Standby switch.
  

  Image: This image displays the front panel of the speaker, highlighting the central volume control knob, the headphone output jack, and the auxiliary input port for connecting external audio devices.

• Gniazdo słuchawkowe: For private listening, plug your headphones into the dedicated headphone jack located on the front of the primary speaker. Plugging in headphones will mute the speaker output.
• Wejście pomocnicze: The speakers include an auxiliary input line, allowing you to connect a second audio device simultaneously.

Konserwacja

Aby zapewnić długowieczność i optymalną wydajność głośników, należy przestrzegać poniższych wskazówek dotyczących konserwacji:

• Czyszczenie: Use a soft, dry cloth to wipe down the speaker surfaces. Avoid using abrasive cleaners, waxes, or solvents.
• Umieszczenie: Trzymaj głośniki z dala od bezpośredniego światła słonecznego, źródeł ciepła i nadmiernej wilgoci.
• Zarządzanie kablami: Aby zapobiec uszkodzeniom, należy zadbać o to, aby wszystkie kable były starannie ułożone i nie były naprężone.

Rozwiązywanie problemów

If you encounter issues with your speakers, try the following solutions:

• Brak dźwięku:
  • Ensure the speakers are powered on (blue LED illuminated).
  • Sprawdź, czy pokrętło głośności jest ustawione na odpowiednią wartość.
  • Verify the 3.5mm audio jack is securely connected to both the speaker and your audio device.
  • Confirm that your audio device's volume is not muted or too low.
  • If headphones are plugged into the speaker, remove them to enable speaker output.
• Zniekształcony dźwięk:
  • Lower the volume on both the speakers and your audio device.
  • Sprawdź, czy kable audio nie są uszkodzone lub luźno podłączone.
  • Test with a different audio source to rule out device-specific issues.
• Wskaźnik zasilania nie świeci:
  • Check that the power cord is firmly plugged into both the speaker and a working wall outlet.
  • Upewnij się, że pokrętło głośności jest przekręcone zgodnie z ruchem wskazówek zegara poza pozycję „wyłączone”.

Specyfikacje

Gwarancja i wsparcie

This product is backed by an Amazon Basics 1-year limited warranty. For warranty claims or technical support, please refer to the contact information provided with your purchase or visit the Amazon Basics support page online.