Wstęp
This manual provides essential information for the safe and effective use of your Zeee 3S 5200mAh 11.1V 50C Lipo Battery. Please read all instructions carefully before use to ensure optimal performance and safety. This battery is designed for various RC models including helicopters, airplanes, multirotors, boats, cars, and trucks.
Ostrzeżenia dotyczące bezpieczeństwa
Lithium Polymer (LiPo) batteries require careful handling. Failure to follow these safety guidelines can result in fire, personal injury, or property damage.
- Users must read the safety manual before using the battery.
- Use only a Lithium Polymer (LiPo) specific balance charger.
- The suggested charge rate is 0.5 - 1C. Do not exceed 5C fast charge capability.
- Nigdy nie ładuj baterii bez nadzoru.
- Maintain ambient charging temperature between 41°F (5°C) and 95°F (35°C).
- Do not puncture, disassemble, short circuit, or expose the battery to extreme temperatures or direct sunlight.
- Jeśli bateria puchnie, przecieka lub wykazuje jakiekolwiek oznaki uszkodzenia, należy natychmiast zaprzestać jej używania i poddać odpowiedniej utylizacji.
Produkt ponadview
Główne cechy:
- Pojemność bateriitage: 11.1V (3S1P Configuration)
- Pojemność: 5200mAh
- Stawka rozładowania: 50C continuous
- Złącza: Soldered T Plug and XT60 Replacement Plug (not an adapter)
- Wymiary: 132mm x 43mm x 25mm (5.2 x 1.69 x 0.98 cale)
- Waga: Approximately 343g (12.1oz)
- Budowa: Soft Case Lithium Polymer Battery
Zgodność aplikacji:
This Zeee 3S 5200mAh Lipo battery is compatible with various RC models, including helicopters, airplanes, multirotors, boats, cars, and trucks. It is suitable for 1/10 scale vehicles or larger, such as Traxxas Slash VXL, Slash 4x4 VXL, E-Maxx Brushless, E-Revo Brushless, and Spartan models. Compatibility is ensured if the voltage, dimensions, and plug type match your specific RC model requirements.
Konfiguracja i ładowanie
Choosing a Charger:
- The charger must have a balance charging function.
- The charger must support 3S battery charging (11.1V nominal, 12.6V fully charged).
- The recommended charging current for this battery is 2.6A to 5.2A. Ensure your charger supports this range.
Proces ładowania:
- Connect the battery's main discharge plug (T Plug or XT60) to the charger's output.
- Connect the battery's balance lead to the charger's balance port.
- Select the LiPo balance charge program on your charger.
- Set the correct cell count (3S) and charging current (0.5-1C, e.g., 2.6A to 5.2A for a 5200mAh battery).
- Start the charging process and monitor the battery throughout. Never leave charging batteries unattended.
Instrukcja obsługi
- Ensure the battery is fully charged and balanced before use.
- Securely install the battery in your RC model, ensuring it does not shift during operation.
- Connect the battery's discharge plug to your RC model's ESC (Electronic Speed Controller).
- Always monitor battery temperature during operation. If the battery becomes excessively hot, stop use immediately and allow it to cool.
- Avoid over-discharging the battery. Most ESCs have a Low Voltage Cutoff (LVC) feature; ensure it is set correctly for 3S LiPo batteries.
- After use, allow the battery to cool down before recharging or storing.
Konserwacja i przechowywanie
- Pojemność pamięcitage: For long-term storage, charge or discharge the battery to its storage voltage (zwykle 3.8 V na ogniwo).
- Środowisko przechowywania: Store batteries in a cool, dry place, away from direct sunlight, heat sources, and flammable materials. A LiPo-safe bag or container is recommended.
- Regularna kontrola: Periodically inspect the battery for any signs of damage, swelling, or leaks. Do not use damaged batteries.
- Sprzedaż: Dispose of damaged or old LiPo batteries responsibly at designated battery recycling centers. Never throw them in household trash.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Bateria się nie ładuje | Incorrect charger settings, faulty charger/battery, poor connection. | Verify charger settings (3S, LiPo mode, current). Check all connections. Try a different charger if available. |
| Battery swells or gets hot during charge/discharge | Overcharging, over-discharging, internal damage, excessive current draw. | Immediately disconnect the battery. Do not use. Dispose of safely. Ensure correct charger settings and appropriate LVC in your RC model. |
| Krótki czas trwania | Battery degradation, high current draw from model, improper charging. | Ensure battery is fully balanced. Check for excessive load on your RC model. Consider battery age and cycle count. |
| Uneven cell voltage | Improper balance charging, damaged cell. | Always use a balance charger. If cells remain unbalanced after multiple balance charges, the battery may be damaged and should be replaced. |
Specyfikacje
| Funkcja | Wartość |
|---|---|
| Pojemność bateriitage | 11.1 V |
| Konfiguracja | 3S1P |
| Pojemność | 5200mAh |
| Szybkość rozładowania | 50C |
| Złącza | T Plug and XT60 Replacement Plug |
| Wymiary (dł.*szer.*wys.) | 132 × 43 × 25 mm (5.2 × 1.69 × 0.98 cala) |
| Waga | 343 g (12.1 uncji) |
| Skład ogniw baterii | Polimer litowy |
| Zalecane zastosowania | Pojazdy zdalnie sterowane |
| Numer modelu przedmiotu | SDL-9543125 |
Gwarancja i wsparcie
For any product-related issues or support, please contact Zeee customer service. You can reach us through the following methods:
- Access your order history and click the "Contact Seller" option.
- Visit our storefront and click "Ask a question."
Staramy się odpowiadać na wszystkie zapytania w ciągu 24 godzin.
Oficjalny film o produkcie
Video: Zeee Lipo Battery Overview. Ten film zapewnia ponadview of the Zeee Lipo Battery, showcasing its features and applications. (Source: ZEEE POWER Direct)