VGEBY Brushless Motor Controller Instruction Manual

1. Wprowadzenie

This manual provides detailed instructions for the installation, operation, and maintenance of your VGEBY 36V/48V 250W Electric Bicycle Brushless Motor Speed Controller. This controller is designed to provide stable speed and sensitive control for braking and direction changes in electric bicycles and scooters. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Informacje dotyczące bezpieczeństwa

• Przed przystąpieniem do prac instalacyjnych, konserwacyjnych lub rozwiązywania problemów należy zawsze odłączyć zasilanie.
• Aby zapobiec zwarciom, należy upewnić się, że wszystkie połączenia są solidne i właściwie zaizolowane.
• Installation should ideally be performed by a qualified technician to avoid damage to the product or personal injury.
• Nie wystawiaj kontrolera na działanie wody i ekstremalnych temperatur.
• Sprawdź, czy objętośćtage and power ratings of your motor and battery are compatible with this controller (36V/48V, 250W).

3. Koniec produktuview i funkcje

The VGEBY Brushless Motor Controller features an aluminum alloy shell with a groove design. This design enhances heat dissipation, protecting the internal circuitry from thermal overloading and ensuring reliable performance. The controller is engineered for sensitive speed control, providing smooth acceleration and responsive braking for your electric vehicle.

Rysunek 3.1: Nadview of the VGEBY Brushless Motor Controller, showing its compact design and numerous wire connections.

Rysunek 3.2: Szczyt view of the controller, highlighting the aluminum casing and wire harness.

4. Specyfikacje

Below are the key specifications for the VGEBY Brushless Motor Controller:

Rysunek 4.1: Physical dimensions of the controller, approximately 9cm (3.54 inches) in length, 5.3cm (2.08 inches) in width, and 3cm (1.18 inches) in height.

5. Instalacja i okablowanie

The controller features clearly labeled interfaces for easy installation. Follow the steps below and refer to the wiring diagram for correct connections.

Rysunek 5.1: The controller with its complete set of wires, each designed for a specific function.

Rysunek 5.2: Detailed wiring diagram illustrating each connection point on the controller.

Połączenia elektryczne:

• Motor Cable A, B, C: Connect these three cables to the corresponding motor phase wires. These are typically thicker wires.
• Światło stopu: Connect to your electric bicycle's brake light system.
• Intelligent Identification 1 & 2: These are for automatic motor phase identification. Connect them together briefly during initial setup, then disconnect once the motor runs smoothly.
• Funkcja tempomatu: Connect to activate the cruise control feature, if your system supports it.
• Battery Positive Electrode: Connect the red wire to the positive terminal of your 36V/48V battery.
• Speed Steering Handle: Connect to the throttle or speed control grip.
• Low Potential Brake: Connect to the brake lever switch for low-level braking signal.
• Assist Sensor: Connect to the pedal assist sensor (PAS) for assisted riding.
• Battery Negative Electrode: Connect the black wire to the negative terminal of your 36V/48V battery.

Ensure all connections are firm and insulated to prevent electrical hazards and ensure optimal performance.

6. Instrukcja obsługi

Once the controller is correctly installed and all connections are secure:

1. Włączanie: Turn on the main power switch of your electric bicycle or scooter.
2. Kontrola przepustnicy: Gently twist the speed steering handle (throttle) to engage the motor. The controller will provide steady speed output.
3. Hamowanie: Apply the brakes. The controller is designed for sensitive control of braking, ensuring a quick and safe stop.
4. Asystent pedałowania: If an assist sensor is connected, pedaling will activate motor assistance, providing power based on your pedaling input.
5. Cruise Function (if applicable): If your system supports and is connected to the cruise function, activate it as per your vehicle's specific instructions to maintain a constant speed.

7. Konserwacja

To ensure the longevity and optimal performance of your VGEBY Brushless Motor Controller, follow these maintenance guidelines:

• Regularna kontrola: Periodically check all wire connections for looseness or damage. Ensure they are securely fastened and insulated.
• Czyszczenie: Keep the controller clean and free from dust, dirt, and moisture. Use a dry, soft cloth for cleaning. Do not use harsh chemicals or immerse in water.
• Ochrona środowiska: Avoid exposing the controller to extreme heat, direct sunlight for prolonged periods, or corrosive environments.
• Rozpraszanie ciepła: Ensure the controller's aluminum casing is not obstructed, allowing for proper airflow and heat dissipation.

8. Rozwiązywanie Problemów

If you encounter issues with your controller, refer to the following common troubleshooting steps:

• Brak zasilania:
  • Sprawdź połączenia akumulatora i upewnij się, że jest naładowany.
  • Verify the main power switch is on.
  • Inspect all power wires for damage or loose connections.
• Silnik nie reaguje:
  • Ensure motor phase wires (Motor Cable A, B, C) are correctly connected.
  • Check the speed steering handle (throttle) connection.
  • If applicable, re-perform the intelligent identification process by connecting the two intelligent identification wires briefly.
• Erratic Speed or Performance:
  • Inspect all signal wires (throttle, brake, assist sensor) for secure connections and damage.
  • Ensure no wires are short-circuiting or making intermittent contact.
• Przegrzanie:
  • Ensure the controller is mounted in a location with adequate airflow.
  • Verify the motor is not drawing excessive current, which could indicate a motor issue.

If problems persist after troubleshooting, contact customer support.

9. Gwarancja i wsparcie

Gwarancja: We offer an unconditional return and refund policy within 180 days if you are not satisfied with our product. This warranty covers manufacturing defects and ensures your satisfaction with the product.

Obsługa klienta: For any questions, technical assistance, or warranty claims regarding this product, please contact our customer service team. You can typically find contact information on the product packaging or through your purchase platform. We are committed to providing timely responses and support.