Zareba DEFT

Zareba DEFT Digital Electronic Fence Tester User Manual

Model: DEFT

1. Wprowadzenie

Thank you for choosing the Zareba DEFT Digital Electronic Fence Tester. This device is designed to accurately measure fence line and fence charger voltage, providing digital accuracy with ease and convenience. It is suitable for measuring voltage on any type of wire in an electric fence system. This manual provides comprehensive instructions for the safe and effective use of your new fence tester. Please read it thoroughly before operation.

2. Informacje dotyczące bezpieczeństwa

Always exercise caution when working with electric fences. High voltage can cause serious injury or death.

  • Ensure the fence charger is properly grounded according to its own instructions.
  • Do not touch the fence wire with bare hands while testing. Always use the insulated probe and ground lead provided.
  • Keep the tester dry. Do not use in wet conditions or allow moisture to enter the device.
  • This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Always wash hands after handling.
  • Store the tester in a safe place, away from children and pets.

3. Koniec produktuview

The Zareba DEFT Digital Electronic Fence Tester is a robust and user-friendly tool for electric fence maintenance.

Główne cechy:

  • Accurate Three Digit Read Out from .5 to 19.9 KV
  • Środki tomtage on Any Type of Wire
  • Back Lit Display - Visible Readings Night and Day
  • Rugged Pocket-Size Case Made of Heavy Duty ABS Plastic
  • Requires 9 Volt Battery Operation (Battery Not Included)

Zdjęcia produktu:

Zareba DEFT Digital Electronic Fence Tester, front view

Przód view of the Zareba DEFT Digital Electronic Fence Tester, showing the digital display and branding.

Zareba DEFT Digital Electronic Fence Tester in retail packaging

The Zareba DEFT Digital Electronic Fence Tester displayed in its retail packaging.

Uwaga: Sprzedawca nie udostępnił żadnych oficjalnych filmów prezentujących produkt, które można by umieścić w niniejszej instrukcji.

4. Konfiguracja

Montaż baterii:

  1. Znajdź komorę baterii z tyłu testera.
  2. Otwórz pokrywę komory baterii.
  3. Insert one (1) 9-volt battery, ensuring correct polarity (+/-).
  4. Dokładnie zamknij pokrywę komory baterii.

Ważny: Battery is not included with the product. Use a fresh 9-volt alkaline battery for optimal performance.

5. Instrukcja obsługi

The Zareba DEFT Digital Electronic Fence Tester is designed for simple and accurate voltagpomiar.

Measuring Fence Voltage:

  1. Uncoil the ground lead from the top of the tester.
  2. Insert the metal ground probe into the soil. Ensure good contact with moist earth for an accurate reading.
  3. Touch the metal contact point on the top of the tester firmly against the electric fence wire.
  4. The digital display will show the voltage reading in kilovolts (KV). The tester provides an accurate three-digit readout from 0.5 to 19.9 KV.
  5. The back-lit display ensures readings are visible both day and night.
  6. Remove the tester from the fence wire and soil after reading.

This tester can measure voltage on any type of electric fence wire, including polywire, polytape, and steel wire.

6. Konserwacja

Wymiana baterii:

When the display becomes dim or the readings are inconsistent, it's time to replace the 9-volt battery. Follow the battery installation steps in the "Setup" section.

Czyszczenie i przechowywanie:

  • Wipe the tester with a clean, dry cloth after each use. Do not use abrasive cleaners or solvents.
  • Ensure the tester is completely dry before storing.
  • Przechowuj tester w chłodnym i suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.
  • Jeśli urządzenie będzie przechowywane przez dłuższy czas, należy wyjąć baterię, aby zapobiec wyciekowi elektrolitu i uszkodzeniu urządzenia.

7. Rozwiązywanie Problemów

ProblemMożliwa przyczynaRozwiązanie
Brak odczytu na wyświetlaczuDead or low battery; Poor ground connection; No voltage na ogrodzeniu.Replace 9V battery; Ensure ground probe is firmly in moist soil; Check fence charger and connections.
Inaccurate or fluctuating readingPoor ground connection; Loose battery connection; Fence shorting out.Improve ground contact; Re-seat battery; Inspect fence line for shorts (e.g., vegetation, broken insulators).
Display difficult to read in bright sunlightHigh ambient light interfering with display visibility.Shade the display with your hand or body while taking a reading. The back-light helps, but direct sunlight can still be challenging.

8. Specyfikacje

AtrybutSzczegół
MarkaZareba
Numer modeluZGRABNY
Źródło zasilaniaBattery Powered (1 x 9V, not included)
KolorCzarny
Minimalna objętość roboczatage0.5 kilowoltów
Maximum Readout19.9 Kilovolts (KV)
Wymiary produktu (dł. x szer. x wys.)28.75 x 2.88 x 0.88 cala
Waga przedmiotu8.1 uncji
TworzywoHeavy Duty ABS Plastic
Kraj pochodzeniaChiny
UPC084644333823

9. Informacje o gwarancji

Specific warranty details for the Zareba DEFT Digital Electronic Fence Tester are typically provided with the product packaging or on the manufacturer's official website. Please refer to the documentation included with your purchase or visit the Zareba webna tej stronie znajdziesz najnowsze informacje dotyczące gwarancji.

10. Wsparcie

For technical assistance, troubleshooting beyond this manual, or inquiries about your Zareba DEFT Digital Electronic Fence Tester, please contact Zareba customer support.

Producent: Woodstream
Marka: Zareba
Webstrona: www.zarebasystems.com (Please check the official Zareba website for contact information and support resources.)

© 2024 Zareba. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.