V-TAC LED Floodlight VT-20-W 20W 6400K White Instruction Manual

1. Wprowadzenie

Thank you for choosing the V-TAC LED Floodlight VT-20-W. This manual provides essential information for the safe installation, operation, and maintenance of your new LED floodlight. Please read these instructions carefully before installation and retain them for future reference.

Image 1.1: V-TAC LED Floodlight VT-20-W (Front View)

This image shows the V-TAC LED Floodlight VT-20-W from the front, highlighting its compact design and LED array.

2. Informacje dotyczące bezpieczeństwa

OSTRZEŻENIE: Zawsze odłączaj zasilanie przed instalacją lub konserwacją.

• Instalację powinien przeprowadzić wykwalifikowany elektryk.
• Upewnij się, że napięcie zasilaniatage matches the product's requirements (AC 220-240V, 50Hz).
• Do not operate the floodlight if the housing or cable is damaged.
• This product is designed for outdoor use (IP65 rated). Ensure all connections are waterproof.
• Nie należy patrzeć bezpośrednio w źródło światła LED, gdy jest ono włączone.
• Trzymać z dala od materiałów łatwopalnych.
• Zapewnij prawidłowe uziemienie.

3. Zawartość opakowania

W skład pakietu wchodzą następujące elementy:

• 1 x V-TAC LED Floodlight VT-20-W
• Instrukcja obsługi (ten dokument)

Image 3.1: Product Packaging

This image displays the retail packaging for the V-TAC LED Floodlight, indicating key features like 20W power, 100° beaming angle, 1600lm brightness, and 30,000H long life.

4. Koniec produktuview i funkcje

The V-TAC LED Floodlight VT-20-W is a high-performance outdoor lighting solution.

Główne cechy:

• Moc: 20 watów
• Temperatura barwowa: 6400K (zimna biel)
• Strumień świetlny: 1600 lumenów
• Beaming Angle: 100°
• Materiał korpusu: Odlew aluminiowy
• Stopień ochrony IP: IP65 (odporność na wodę i kurz)
• Efektywność energetyczna: Up to 85% energy saving compared to traditional lighting.
• Długa żywotność: Około 30,000 godzin.
• Efficient Heat Sink: Designed to prevent overheating and prolong lamp długość życia.
• Diody LED SMD: Utilizes Surface Mounted Device (SMD) LEDs for efficient illumination.

Wymiary:

The floodlight has compact dimensions suitable for various outdoor installations.

• Długość: 15.3 cm
• Szerokość: 13.2 cm
• Głębokość: 2.7 cm
• Waga: 400 gramów

Ilustracja 4.1: Wymiary produktu

This image illustrates the physical dimensions of the V-TAC LED Floodlight, showing a length of 153 mm, a height of 132 mm, and a depth of 27 mm.

Image 4.2: IP65 Rating

This image highlights the IP65 rating of the floodlight, indicating its resistance to water and dust, making it suitable for outdoor use.

Image 4.3: Efficient Heat Sink

This image displays the rear of the floodlight, emphasizing the efficient heat sink design which helps prevent overheating and extends the product's lifespan.

5. Konfiguracja i instalacja

This floodlight is designed for outdoor use and can be mounted as a freestanding unit. Professional installation by a qualified electrician is highly recommended to ensure safety and compliance with local electrical codes.

Kroki instalacji:

1. Odłączenie zasilania: Przed rozpoczęciem jakiejkolwiek instalacji należy upewnić się, że główne zasilanie w miejscu instalacji jest wyłączone za pomocą wyłącznika automatycznego.
2. Miejsce montażu: Choose a suitable outdoor location that provides the desired illumination coverage and allows for secure mounting. The floodlight comes with a bracket for surface mounting.
3. Bezpieczne mocowanie: Use appropriate screws and anchors (not included) to securely fasten the mounting bracket to the desired surface. Ensure the surface can support the weight of the floodlight.
4. Połączenie okablowania:
   • Connect the brown wire (L) to the Live terminal.
   • Connect the blue wire (N) to the Neutral terminal.
   • Connect the yellow/green wire (E) to the Earth/Ground terminal.
   Ensure all connections are tight and properly insulated, especially for outdoor environments, to maintain the IP65 rating. Use a waterproof junction box if necessary.
5. Dostosuj kąt: Once mounted and wired, adjust the floodlight's angle to direct the light as required.
6. Przywrócenie zasilania: Restore power to the circuit and test the floodlight.

Image 5.1: Wiring Connections

This image displays the rear of the floodlight, showing the electrical cable with brown (Live), blue (Neutral), and yellow/green (Earth) wires for connection.

6. Instrukcja obsługi

The V-TAC LED Floodlight VT-20-W operates by direct connection to your electrical mains.

1. Ensure the floodlight is correctly installed and wired according to the "Setup and Installation" section.
2. Switch on the power supply to the floodlight circuit. The floodlight will illuminate instantly.
3. To turn off the floodlight, switch off the power supply to its circuit.

For automated operation (e.g., dusk-to-dawn or motion sensing), an external sensor or timer switch must be installed by a qualified electrician.

Image 6.1: Floodlight in Outdoor Application

This image shows multiple V-TAC LED Floodlights illuminating the exterior of a building at night, demonstrating their effectiveness in outdoor lighting.

7. Konserwacja

The V-TAC LED Floodlight VT-20-W requires minimal maintenance.

• Czyszczenie: Ensure the floodlight is switched off and cool before cleaning. Wipe the exterior with a soft, damp ściereczka. Nie należy używać środków czyszczących o właściwościach ściernych ani rozpuszczalników.
• Kontrola: Periodically inspect the floodlight and its wiring for any signs of damage, wear, or loose connections. Address any issues promptly.
• Brak części nadających się do samodzielnej naprawy przez użytkownika: There are no user-serviceable parts inside the floodlight. Do not attempt to open or repair the unit.

8. Rozwiązywanie Problemów

If you encounter issues with your V-TAC LED Floodlight, refer to the following troubleshooting guide:

If the problem persists after attempting these solutions, contact V-TAC customer support or a qualified electrician.

9. Specyfikacje

Image 9.1: EU Energy Label

This image shows the EU energy label for the V-TAC LED Floodlight, indicating an energy efficiency class of F and an energy consumption of 20 kWh per 1000 hours. More details can be found at eprel.ec.europa.eu/qr/966766.

10. Gwarancja i wsparcie

V-TAC products are manufactured to high standards and are designed for durability. While specific warranty details are not provided in this manual, V-TAC typically offers a warranty period for its products. Please refer to your purchase documentation or the official V-TAC webStrona zawiera szczegółowe informacje o gwarancji.

For technical support, troubleshooting assistance, or warranty claims, please contact your local V-TAC distributor or visit the official V-TAC webstrona.

Producent: V-TAC Europe Ltd.
Adres: bul. Rozhen 41, Sofia, Bulgaria