1. Koniec produktuview
The Astralpool Aster 99- Sand Filter is a high-performance filtration system designed for swimming pools. Constructed from laminated polyester and fiberglass, this filter ensures durability and efficient water purification. It features a lateral selector valve, a manometer for pressure monitoring, and a drain valve for easy water emptying. This manual provides essential information for the safe and effective installation, operation, and maintenance of your filter.
- Budowa: Laminated polyester and fiberglass for enhanced durability.
- Składniki: Equipped with a manometer, drain valve, and lateral selector valve.
- Maksymalne ciśnienie robocze: 2.5 kg/cm².
- Maximum Filtration Capacity: 50 m³/h/m².
2. Konfiguracja i instalacja
Proper installation is crucial for the optimal performance and longevity of your Astralpool Aster 99- Sand Filter. Ensure all connections are secure and watertight.
2.1. Wybór miejsca
Choose a level, solid surface for the filter, preferably close to the pool pump and the pool itself. The location should be protected from direct sunlight and adverse weather conditions, and allow sufficient space for maintenance and operation.
2.2. Zespół filtra
- Umieść filtr: Place the filter tank on its designated base.
- Dodaj filtr: Carefully fill the filter tank with the appropriate amount and type of filter sand (or other media) as recommended by Astralpool. Ensure the central pipe is protected during this process to prevent sand from entering it.
- Install Multi-Port Valve: Attach the lateral selector valve to the top of the filter tank. Ensure the O-ring is correctly seated and the clamp jest bezpiecznie zamocowany.
- Podłącz hydraulikę: Connect the pump outlet to the "PUMP" port on the valve, the pool return line to the "RETURN" port, and the waste line to the "WASTE" port. Use appropriate fittings and sealants to prevent leaks.
- Manometer Installation: Screw the manometer into its designated port on the multi-port valve.
- Zawór spustowy: Ensure the drain valve at the bottom of the filter is closed.
Rysunek 1: Technical drawing of the Astralpool Aster 99- Sand Filter, illustrating key dimensions (D, H, M, N, K) and overall structure. This diagram helps in understanding the physical layout and connection points of the filter.
3. Instrukcja obsługi
The multi-port valve controls the filter's operation. Always turn off the pump before changing the valve position to prevent damage.
3.1. Valve Positions
- FILTR: Normal filtration mode. Water flows through the filter media and returns to the pool.
- PŁUKANIE WSTECZNE: Cleans the filter media by reversing water flow. Water is discharged through the waste line.
- WYPŁUKAĆ: Used after backwashing to settle the filter media and flush out any remaining debris from the waste line.
- ODPAD/ODPROWADZANIE: Bypasses the filter, sending water directly to the waste line. Useful for vacuuming heavy debris or lowering pool water level.
- RECYRKULUJ: Omija filtr, kierując wodę bezpośrednio z powrotem do basenu. Przydatny do rozprowadzania środków chemicznych bez filtracji.
- ZAMKNIĘTE: Shuts off all flow to the filter and pool. Use for pump maintenance or when the filter is not in use.
3.2. Pierwsze uruchomienie
- Ensure the filter is filled with sand and all connections are secure.
- Set the multi-port valve to the "BACKWASH" position.
- Turn on the pump and backwash for 2-3 minutes, or until the water in the sight glass (if present) runs clear.
- Wyłącz pompę.
- Set the valve to the "RINSE" position.
- Włącz pompę i płucz przez 30–60 sekund.
- Wyłącz pompę.
- Set the valve to the "FILTER" position.
- Turn on the pump. The filter is now operating in normal filtration mode.
4. Konserwacja
Regular maintenance ensures efficient filtration and extends the life of your Astralpool Aster 99- Sand Filter.
4.1. Backwashing
Backwash the filter when the pressure gauge reading is 0.2-0.3 kg/cm² (3-5 psi) above the clean filter's starting pressure, or when pool water clarity decreases.
- Wyłącz pompę.
- Ustaw zawór wieloportowy w pozycji „PŁUKANIE WSTECZNE”.
- Turn on the pump and backwash until the water in the sight glass runs clear (typically 2-3 minutes).
- Wyłącz pompę.
- Set the valve to "RINSE".
- Włącz pompę i płucz przez 30–60 sekund.
- Wyłącz pompę.
- Set the valve to "FILTER".
- Włącz pompę, aby wznowić normalną filtrację.
4.2. Zimowanie (jeśli dotyczy)
In colder climates, proper winterization is essential to prevent freeze damage.
- Drain all water from the filter tank by opening the drain valve.
- Remove the manometer and store it in a warm, dry place.
- Set the multi-port valve handle between two positions (e.g., between "FILTER" and "CLOSED") to relieve pressure on the internal seal.
- Disconnect all plumbing and store pipes if necessary.
5. Rozwiązywanie Problemów
This section addresses common issues you might encounter with your sand filter.
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Low water flow / High pressure gauge reading | Clogged filter media; dirty pump strainer basket; closed valve. | Backwash the filter; clean pump strainer basket; ensure all valves are open. |
| Mętna woda w basenie | Insufficient filtration time; dirty filter media; improper chemical balance; damaged internal components. | Increase filtration time; backwash/rinse filter; check pool chemistry; inspect filter internals for damage. |
| Wyciek wody z zaworu | Worn O-rings or gaskets; loose clamp. | Inspect and replace O-rings/gaskets; tighten clamp. |
| Piasek powracający do basenu | Damaged laterals inside filter; improper rinsing after backwash. | Perform a thorough rinse cycle; inspect and replace damaged laterals. |
6. Specyfikacje techniczne
Detailed specifications for the Astralpool Aster 99- Sand Filter (Ø 500 model).
- Model: Aster 99- Ø 500
- Materiał konstrukcyjny: Laminated Polyester and Fiberglass
- Rodzaj zaworu: Lateral Selector Valve
- Dołączone akcesoria: Manometer, Drain Valve
- Maksymalne ciśnienie robocze: 2.5 kg/cm²
- Maximum Filtration Capacity: 50 m³/h/m²
6.1. Dimensions (for Ø 500 model)
| Wymiar | Wartość (mm) |
|---|---|
| Ø (Diameter) | 500 |
| D (Overall Diameter) | 500 |
| H (wysokość) | 855 |
| M (Valve Height from Base) | 415 |
| N (Lower Port Height from Base) | 290 |
| K (Port Size) | 1 1/2" |
Note: Dimensions are approximate and subject to manufacturing tolerances. Refer to Figure 1 for visual representation of dimensions.
7. Informacje o gwarancji
Specific warranty details for Astralpool products are typically provided at the point of purchase or within separate warranty documentation. Please retain your proof of purchase for any warranty claims. For detailed warranty terms and conditions, refer to the official Astralpool webodwiedź witrynę lub skontaktuj się z autoryzowanym dealerem.
8. Obsługa klienta
For technical assistance, spare parts, or further inquiries regarding your Astralpool Aster 99- Sand Filter, please contact your local Astralpool dealer or visit the official Astralpool webstrona.
Astralpool Official Webstrona: www.astralpool.com