APIELE 16mm Momentary Push Button Switch with 12V LED Ring Indicator User Manual

1. Koniec produktuview

The APIELE 16mm Momentary Push Button Switch is designed for various electrical applications. This switch features a 12V LED ring indicator and a durable metal construction. It operates as a momentary switch, meaning it activates only while pressed and deactivates upon release. The switch is rated for 5A/250VAC and includes 1 Normally Open (NO) and 1 Normally Closed (NC) contact configuration, offering versatility for different circuit controls.

Główne cechy obejmują:

• Momentary operation: Push to activate, release to deactivate.
• Integrated 12V LED ring indicator.
• Durable metal construction with IP67 waterproof and IK10 protection.
• Contact configuration: 1 Normally Open (NO) and 1 Normally Closed (NC).
• Electrical life: 200,000 cycles; Mechanical life: 1,000,000 cycles.

Figure 1: APIELE 16mm Momentary Push Button Switch (Example: Black Shell-Blue LED)

2. Konfiguracja i instalacja

2.1 Montaż

The switch requires a 16mm (0.63 inch) mounting hole. The recommended panel thickness for installation is between 1mm and 10mm. Secure the switch with a nut torque of 5-14Nm.

Figure 2: Mounting dimensions and specifications for the 16mm push button switch.

2.2 instrukcje okablowania

The switch comes with a pigtail socket for easy wiring. The LED operates on 12V DC. The switch contacts are 1 Normally Open (NO) and 1 Normally Closed (NC).

Refer to the wiring diagram below for connection details. The pigtail wires are color-coded as follows:

• Żółty przewód: Normal Closed Pin (NC)
• Niebieski przewód: Normal Open Pin (NO)
• Zielony przewód: Common Pin (C)
• Czerwony przewód: Positive LED Pin (+)
• Czarny przewód: Negative LED Pin (-)

Example Wiring for Normally Open (NO) Switch with Always-On LED:

• Połącz Zielony przewód (Common) to the power source positive (+).
• Połącz Niebieski przewód (Normal Open) to the positive (+) input of your device.
• Połącz Czerwony przewód (LED +) to a 12V switched power source.
• Połącz Czarny drut (LED -) to ground (-).
• Ten Żółty przewód (Normal Closed) is not used in this configuration.

This configuration allows the LED to be continuously lit when power is supplied to the red wire, and the switch will complete the circuit to your device when pressed.

Figure 3: Detailed wiring diagram for the APIELE 16mm push button switch, showing color codes for Normal Closed, Normal Open, Common, Positive LED, and Negative LED pins.

3. Instrukcja obsługi

This is a momentary push button switch. To operate, press and hold the button to activate the connected circuit. Release the button to deactivate the circuit. The integrated LED ring will illuminate according to its wiring configuration (e.g., always on, or only when the switch is pressed).

Figure 4: The switch is designed for high durability, with a mechanical life of 1,000,000 cycles and an electrical life of 200,000 cycles.

4. Konserwacja

The APIELE 16mm push button switch is designed for durability and minimal maintenance. It features an IP67 protection level, making it resistant to dust and water splashes. While it is splash-resistant, it is not designed to be submerged underwater.

• Czyszczenie: Use a soft, dry cloth to clean the switch surface. Avoid abrasive cleaners or solvents.
• Warunki środowiskowe: The switch is suitable for operation in temperatures ranging from -20℃ to +55℃.
• Ochrona: The IP67 rating ensures protection against dust ingress and temporary immersion in water (up to 1 meter for 30 minutes). However, prolonged submersion is not recommended.

Figure 5: The switch features IP67 protection, indicating high resistance to dust and water splashes.

5. Rozwiązywanie Problemów

If you encounter issues with your APIELE 16mm Momentary Push Button Switch, consider the following troubleshooting steps:

• Switch Not Activating:
  • Verify all wiring connections are secure and correctly matched to the diagram (Figure 3).
  • Upewnij się, że źródło zasilania zapewnia odpowiednią głośnośćtage (e.g., 12V for the LED).
  • Check for any loose connections at the pigtail socket or the device it controls.
• Dioda LED nie świeci:
  • Confirm the Red (+) and Black (-) LED wires are connected to a 12V power source and ground, respectively.
  • Check for proper polarity.
  • Ensure the 12V power source for the LED is active.
• Działanie przerywane:
  • Inspect all wires for damage or fraying.
  • Ensure the switch is securely mounted and the nut torque is within the specified range (5-14Nm).
  • Avoid exceeding the switch's rated current (5A/250VAC).

Jeśli po wykonaniu tych czynności problem nadal występuje, skontaktuj się z działem obsługi klienta, aby uzyskać dalszą pomoc.

6. Specyfikacje

7. Gwarancja i wsparcie

7.1 Informacje o gwarancji

Specific warranty details for this product are not provided in the available information. Please refer to the retailer's return policy or contact APIELE directly for warranty inquiries.

7.2 Obsługa klienta

For technical assistance, product inquiries, or support, please visit the official APIELE store or contact their customer service department.

APIELE Store: https://www.amazon.com/stores/APIELE/page/194CDEEB-78B9-40FE-ABD1-C1F44F9C5282