HYS TC-110M Antenna Magnet Mount User Manual

1. Koniec produktuview

The HYS TC-110M is a versatile magnetic mount designed for CB, VHF, UHF, and HF ham radio antennas. It features an SO-239 connection style, compatible with antennas using a PL-259 connector. The mount includes a 5-meter (16.4 ft) RG58 coaxial cable terminated with a PL-259 plug for connecting to your mobile radio. Its 4.3-inch diameter magnetic base provides a strong pull strength of 30.8 lbs, ensuring secure attachment to metallic surfaces. A protective rubber coating on the magnet prevents scratching the vehicle's finish.

Image: HYS TC-110M magnet mount with coiled coaxial cable and PL-259 connector.

2. Informacje dotyczące bezpieczeństwa

• Ensure the mounting surface is clean and dry before attaching the magnet mount to achieve maximum adhesion.
• Do not exceed the recommended antenna length of 1.3 meters (approximately 4.3 feet) and weight of 0.5 kg (approximately 1.1 lbs) for the magnetic base to prevent detachment, especially at high speeds.
• Route the coaxial cable carefully to avoid pinching, sharp bends, or interference with vehicle operations (e.g., doors, windows, pedals).
• Regularly inspect the magnet mount and cable for any signs of wear or damage. Replace if necessary.
• Avoid placing the magnet mount near sensitive electronic equipment inside the vehicle that could be affected by magnetic fields.

3. Zawartość opakowania

Sprawdź, czy w opakowaniu znajdują się wszystkie elementy:

• 1 x HYS TC-110M Magnetic Antenna Base with SO-239 connector
• 1 x 5-meter (16.4 ft) RG58 Coaxial Cable with PL-259 plug (pre-attached to the base)
• 1 x Protective Rubber Sleeve (pre-installed on the base)

Notatka: The antenna itself is not included with this magnet mount and must be purchased separately.

Image: HYS TC-110M magnet mount with coaxial cable, shown next to an antenna for reference, indicating antenna is not included.

4. Instrukcje konfiguracji

Follow these steps to set up your HYS TC-110M antenna magnet mount:

1. Przygotuj powierzchnię montażową: Choose a flat, metallic surface on your vehicle, such as the roof or trunk lid. Clean the surface thoroughly to remove any dirt, dust, or debris. This ensures optimal magnetic adhesion and prevents scratching.
2. Inspect the Protective Rubber Sleeve: The magnet mount comes with a protective rubber sleeve. Ensure it is properly seated around the base to protect your vehicle's paint.


Image: The protective rubber sleeve on the magnet mount base.

3. Attach the Magnet Mount: Place the magnet mount firmly on the prepared metallic surface. The strong magnet will secure it in place.
4. Podłącz antenę: Screw your compatible antenna (with a PL-259 connector) onto the SO-239 connector on the top of the magnet mount. Hand-tighten until secure.


Image: SO-239 (UHF Female) connector on the magnet mount and PL-259 (UHF Male) connector on the coaxial cable.

5. Poprowadź kabel koncentryczny: Carefully route the 5-meter RG58 coaxial cable from the magnet mount into your vehicle to your radio. Avoid sharp bends, kinks, or areas where the cable could be pinched or damaged. Ensure it does not interfere with doors, windows, or other moving parts.
6. Połącz się z radiem: Plug the PL-259 connector at the end of the coaxial cable into the corresponding antenna input on your CB, VHF, UHF, or HF mobile radio.

Film demonstracyjny konfiguracji

Video: This video demonstrates the process of connecting an antenna to the SO-239 magnet mount and highlights the protective rubber coating.

Produkt ponadview Wideo

Wideo: Krótki przeglądview of the HYS magnetic base, highlighting its size and pull strength.

5. Instrukcja obsługi

Once the magnet mount and antenna are securely installed and connected to your radio, you can begin operation. Ensure your radio is properly configured for the antenna type and frequency band you are using.

• SWR Adjustment: For optimal performance and to prevent damage to your radio, it is crucial to check and adjust the Standing Wave Ratio (SWR) of your antenna system. Refer to your antenna and radio manuals for specific SWR tuning procedures.
• Optymalne rozmieszczenie: The performance of your antenna system can be affected by the mounting location. Generally, a central location on a large metallic surface (like the vehicle roof) provides the best ground plane and radiation pattern.

Image: Reference diagram showing signal performance based on antenna mounting location on a vehicle.

6. Konserwacja

Proper maintenance ensures the longevity and performance of your magnet mount:

• Oczyść bazę: Periodically clean the underside of the magnetic base and the vehicle's mounting surface. Dirt and debris can reduce magnetic adhesion and scratch paint. Use a mild soap and water solution, then dry thoroughly.
• Sprawdź kable i złącza: Check the coaxial cable for any cuts, fraying, or damage. Ensure the PL-259 plug and SO-239 connector are clean and free of corrosion.
• Sprawdź połączenie antenowe: Verify that the antenna is securely tightened to the SO-239 connector on the mount.

7. Rozwiązywanie Problemów

If you encounter issues with your HYS TC-110M magnet mount, consider the following:

• Antenna Detaches at Speed:
  • Upewnij się, że powierzchnia montażowa jest czysta i płaska.
  • Verify the antenna's length and weight are within the recommended limits (max 1.3m / 0.5kg).
  • Check if the protective rubber sleeve is properly seated and not interfering with magnetic contact.
• Poor Signal Performance:
  • Sprawdź wszystkie połączenia kablowe pod kątem dokręcenia i prawidłowego osadzenia.
  • Ensure the SWR of your antenna system is properly tuned. High SWR can indicate a poor match or connection.
  • Confirm the antenna is compatible with the magnet mount's SO-239 connector.
  • Consider the mounting location; a central roof position generally offers better performance.
• Połączenie przerywane:
  • Inspect the coaxial cable for damage (cuts, kinks).
  • Check the PL-259 and SO-239 connectors for corrosion or loose pins.

8. Specyfikacje

Image: Dimensions of the HYS TC-110M magnet mount and cable length.

9. Gwarancja i wsparcie

For warranty information or technical support regarding your HYS TC-110M Antenna Magnet Mount, please refer to the documentation provided with your purchase or contact HYS Communication directly through their official webna stronie internetowej lub w kanałach obsługi klienta. Zachowaj paragon jako dowód zakupu na wypadek roszczeń gwarancyjnych.