Casio PRG-650Y-1CR
Casio PRO TREK Solar Powered Silicone Watch User Manual
Model: PRG-650Y-1CR
Marka: Casio
Wstęp
Your Casio PRO TREK PRG-650Y-1CR is a solar-powered watch designed for outdoor enthusiasts, featuring a Triple Sensor for bearing, altitude/barometric pressure, and temperature measurements. Its robust design and advanced functionalities make it suitable for various outdoor activities, especially in low-light conditions with its Neon Illuminator.
This manual provides detailed instructions on setting up, operating, and maintaining your PRO TREK watch to ensure optimal performance and longevity.

Rycina 1: Przód view of the Casio PRO TREK PRG-650Y-1CR watch, showcasing its analog and digital display with a black dial and white hands.
Organizować coś
Initial Charging (Tough Solar)
Your PRO TREK watch is equipped with Tough Solar technology, converting light into energy to power the watch. For initial setup or after prolonged storage, ensure the watch is exposed to bright light for several hours to achieve a full charge. Avoid covering the watch face when charging.
- Place the watch in a location where it can receive direct sunlight or strong fluorescent light.
- Podczas ładowania zegarka należy unikać umieszczania go w bardzo gorącym otoczeniu.
- A fully charged watch can operate for approximately 6 months without further light exposure under normal use, or up to 25 months in power-saving mode.
Ustawianie czasu i daty
The watch automatically adjusts time and date based on its internal calendar. Manual adjustments may be necessary for specific time zones or if the watch has been without power for an extended period.
- Pull out the crown to the first click. The second hand will move to the current time zone city code.
- Rotate the crown to select your desired city code. The digital display will show the time for that city.
- Push the crown back in to set the time zone.
- For manual time adjustment, pull the crown out to the second click. The second hand will move to 12 o'clock.
- Use the buttons (usually A, B, C, D) to adjust hours, minutes, and date as indicated in the digital display. Refer to the specific button functions printed on the watch bezel or case for precise control.
- Push the crown back in to finalize the settings.

Figure 2: The watch comfortably worn on a wrist, demonstrating its size and fit.
Funkcje operacyjne
The PRO TREK PRG-650Y-1CR features a Triple Sensor for environmental data and various timekeeping modes.
Triple Sensor Functions
Access these functions using the dedicated sensor buttons, typically labeled ALTI (Altimeter), BARO (Barometer), and COMP (Compass).
- Wysokościomierz: Measures current altitude based on atmospheric pressure. Press the ALTI button to activate. The digital display will show the altitude.
- Barometr: Displays atmospheric pressure, which can indicate weather trends. Press the BARO button to activate. The digital display will show the barometric pressure.
- Termometr: Measures ambient temperature. For accurate readings, remove the watch from your wrist for at least 20-30 minutes to avoid body heat interference.
- Kompas cyfrowy: Determines magnetic north and displays bearing. Press the COMP button to activate. The second hand will point north, and the digital display will show the bearing in degrees.

Figure 3: Digital display showing an altitude reading in meters.

Figure 4: Digital display showing a compass bearing.
Timekeeping Modes
- Czas światowy: Displays the current time in various major cities around the world.
- Stoper: Pomiar upływu czasu z dużą dokładnością.
- Odliczanie czasu: Odliczanie od ustawionego czasu.
- Alarm: Ustawiaj codzienne alarmy.
Neon Illuminator
The Neon Illuminator provides enhanced visibility in the dark. Press the light button (usually located on the side) to illuminate the analog hands and digital display with a bright, neon glow.

Figure 5: The watch face illuminated by the Neon Illuminator in a dark environment, highlighting the hands and hour markers.
Konserwacja
Czyszczenie
Regularne czyszczenie pomaga zachować wygląd i funkcjonalność zegarka.
- Przetrzyj zegarek miękką, suchą ściereczką, aby usunąć brud i wilgoć.
- W przypadku uporczywych zabrudzeń należy użyć miękkiej szczotki i łagodnego roztworu mydła, następnie dokładnie spłukać czystą wodą i całkowicie wysuszyć.
- Avoid using harsh chemicals or abrasive materials, as they can damage the watch's finish or seals.
Odporność na wodę
The PRG-650Y-1CR is water-resistant up to 100 meters (10 BAR). This means it is suitable for swimming and snorkeling, but not for scuba diving.
- Nie należy naciskać przycisków ani koronki, gdy zegarek jest mokry lub zanurzony w wodzie.
- Po wystawieniu zegarka na działanie słonej wody należy go dokładnie opłukać czystą wodą i całkowicie wysuszyć.
Pielęgnacja ładowania słonecznego
To ensure continuous operation, expose the watch to light regularly. If the charge level drops too low, some functions may be disabled to conserve power.

Rysunek 6: Profesjonalizm bocznyfile of the watch, showing the buttons and crown.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Watch not functioning or display is blank. | Niski poziom naładowania baterii. | Aby naładować zegarek, wystaw go na działanie jasnego światła na kilka godzin. |
| Nieprawidłowa godzina lub data. | Time zone not set correctly or manual adjustment needed. | Adjust time zone and time manually as described in the Setup section. |
| Sensor readings are inaccurate. | External factors (e.g., body heat for temperature), or sensor calibration needed. | For temperature, remove watch from wrist. For compass/altimeter, perform calibration as per advanced manual (not covered here). |
| Luminescent band not glowing. | Insufficient light exposure to the band. | Expose the watch band to bright light for a period to allow it to absorb light for luminescence. |
Specyfikacje
- Numer modelu: PRG-650Y-1CR (also PRG-650Y-1)
- Materiał obudowy/ramki: Żywica / Stal nierdzewna
- Materiał paska: Silicone (DURA-SOFT)
- Źródło zasilania: Tough Solar (zasilany energią słoneczną)
- Wodoodporność: 10 BARÓW (100 metry)
- Czujniki: Triple Sensor (Altimeter, Barometer, Thermometer, Digital Compass)
- Oświetlenie: Neon Illuminator
- Wymiary: Około 1 x 1 x 1 cala
- Waga: Około 3.53 uncji
- Bateria: 1 CR2 battery (included, for backup/specific functions)

Figure 7: A size guide illustrating various watch diameters for comparison.
Oficjalne filmy produktowe
Casio Men's 'PRO TREK' Solar Powered Silicone Watch Overview
Ten film przedstawia ogólny przeglądview of the Casio PRO TREK Solar Powered Silicone Watch, highlighting its key features and design.
Wideo marki Casio
This video showcases the Casio brand's commitment to durability and innovation, featuring various G-SHOCK and PRO TREK models in action.
Gwarancja i wsparcie
Casio provides a limited warranty for its products. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical support, service, or inquiries regarding your Casio PRO TREK watch, please visit the official Casio webOdwiedź witrynę lub skontaktuj się z działem obsługi klienta. Zachowaj dowód zakupu na wypadek reklamacji.
Więcej informacji i zasobów pomocy znajdziesz na stronie Sklep Casio na Amazonie.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.