VGEBY Motor Speed Brush Controller User Manual

Wstęp

This manual provides essential information for the installation, operation, and maintenance of your VGEBY Motor Speed Brush Controller. This device is designed to provide stable speed control and responsive braking and direction changes for electric bicycles and scooters. Constructed from durable aluminum alloy, it offers circuit protection and efficient heat dissipation.

Środki ostrożności

• Always ensure the power is disconnected before making any connections or adjustments.
• Verify all connections are correct according to the labels to prevent damage to the controller or other components.
• Pay close attention to the polarity of the power cord: red for positive (+), black for negative (-). Incorrect polarity can cause severe damage.
• Jeśli masz jakiekolwiek wątpliwości, skonsultuj się z wykwalifikowanym technikiem.

Konfiguracja i instalacja

The controller features clearly labeled interfaces to facilitate easy installation. Carefully read the labels on each interface and connect them to their corresponding components.

1. Identify Interfaces: Locate the instruction labels on each connector. These labels indicate the function of each wire (e.g., battery, motor, throttle, brake, indicator light, charging port, power locks).
2. Podłączenie zasilania: Connect the thick red wire to the positive terminal of your battery and the thick black wire to the negative terminal. Double-check polarity before applying power.
3. Podłączenie silnika: Connect the motor wires to the corresponding motor output wires from the controller.
4. Połączenie przepustnicy: Connect the throttle assembly to the designated throttle interface. The speed regulator typically operates within a 1-4V range.
5. Brake Connections: Connect the brake levers to the brake interfaces. The controller is designed for sensitive control of braking.
6. Połączenia akcesoriów: Connect any additional accessories such as indicator lights, charging ports, or power locks to their respective labeled interfaces.

Figure 1: VGEBY Motor Speed Brush Controller showing the main unit and its various labeled wire connectors for different functions.

Rysunek 2: Zbliżenie view of the controller's wire harnesses, highlighting a connector labeled 'Indicator' in Chinese and English, demonstrating the clear labeling for installation.

Rysunek 3: Góra view of the VGEBY controller, displaying a label with model number LB27, rated voltage DC24V, rated power 250W, current, undervoltage protection, and speed regulator range.

Instrukcja obsługi

Once properly installed, the controller manages the power delivery to the motor, enabling smooth acceleration and responsive braking. The throttle provides variable speed control, typically within a 1-4V range, allowing for precise adjustment of motor speed.

• Włączanie: Ensure all connections are secure and the battery is charged. Turn on the main power switch of your electric bike or scooter.
• Kontrola przepustnicy: Gently twist the throttle to initiate movement. The controller will provide steady speed based on the throttle input.
• Hamowanie: Apply the brakes as needed. The controller is designed to provide sensitive and immediate braking response.

Konserwacja

The VGEBY Motor Speed Brush Controller is designed for durability with its aluminum alloy casing, which aids in heat dissipation. Regular maintenance is minimal but important for longevity.

• Zachowaj czystosc: Periodically clean the exterior of the controller to prevent dust and debris buildup, which can hinder heat dissipation.
• Sprawdź połączenia: Regularnie sprawdzaj wszystkie połączenia przewodów, aby upewnić się, że są solidne i nie mają korozji ani uszkodzeń. Luźne połączenia mogą prowadzić do przerw w działaniu lub awarii podzespołów.
• Unikaj przegrzania: Ensure the controller is mounted in a location with adequate airflow to prevent thermal overloading. The aluminum alloy casing helps, but proper ventilation is still crucial.
• Chronić przed wilgocią: While robust, avoid exposing the controller to excessive moisture or direct water spray to prevent internal circuit damage.

Rozwiązywanie problemów

If you encounter issues with your VGEBY Motor Speed Brush Controller, refer to the following common problems and solutions:

• Controller Not Functioning / No Power:
  • Check all power connections, especially the thick red and black battery wires, for correct polarity and secure attachment.
  • Ensure the battery is charged and providing the correct voltage (24V, 36V, or 48V depending on model).
  • Verify that any "ignition" or "power lock" wires are correctly connected or bridged if required by your system.
• Silnik nie reaguje na przepustnicę:
  • Inspect the throttle connection for proper seating and damage.
  • Confirm the motor wires are securely connected to the controller.
  • Check if the throttle provides a variable voltage output (typically 1-4V) when twisted.
• Intermittent Operation or Sudden Shutdown:
  • This could indicate loose connections. Re-check all wire connections.
  • The controller might be overheating. Ensure adequate ventilation and that the motor load is within the controller's specified limits.
  • Check for short circuits in the wiring or motor.
• Throttle is "ON/OFF" instead of Gradual:
  • This symptom suggests an issue with the throttle unit itself or its connection. Ensure you are using a compatible variable throttle.
  • Verify the throttle signal wire is correctly connected to the controller's throttle input.

Jeśli wykonanie tych czynności nie rozwiąże problemu, skontaktuj się z działem obsługi klienta, aby uzyskać dalszą pomoc.

Specyfikacje

Figure 4: The VGEBY controller with its approximate dimensions (75mm x 50mm x 35mm) clearly indicated, providing a visual reference for size.

Gwarancja i wsparcie

Ten produkt jest dostarczany z Gwarancja 180 dni. If you encounter any issues or problems with the product within this period, please contact the seller for assistance.

For support, please contact the seller, Linfote, through the platform where the purchase was made. They can provide guidance on installation, troubleshooting, and warranty claims.

For general inquiries or to visit the brand's store, you can find more information at the VGEBY Store.