Instrukcja obsługi samościemniającego hełmu spawalniczego Lincoln Electric

1. Koniec produktuview

The Lincoln Electric Auto-Darkening Welding Helmet with Grind Mode (Model K3446-1) is designed to provide eye and face protection during various welding and grinding operations. This helmet features an auto-darkening lens that automatically adjusts to the arc's brightness, eliminating the need to manually flip the helmet up and down. It includes a dedicated grind mode for clear visibility during grinding tasks.

Image: Lincoln Electric Auto-Darkening Welding Helmet, featuring a black shell with a distinctive red steel flame pattern and an auto-darkening lens.

2. Główne cechy

• Auto-Darkening Lens: Automatically adjusts shade level upon arc strike.
• Variable Shade Lens: Offers adjustable shade levels (9-13) for different welding processes.
• Tryb szlifowania: Provides clear vision for grinding tasks without removing the helmet.
• Adjustable Headgear: Features a 5-position tilt for customized fit and comfort.
• Lekka konstrukcja: Weighs approximately 1.7 pounds for reduced neck strain.
• Impact-Resistant Lenses: Includes 2 extra outside clear polycarbonate lenses for durability.
• Zgodność: ANSI approved and meets CSE/CE standard EN 379.

3. Konfiguracja

1. Rozpakowywanie: Carefully remove the welding helmet and all accessories from the packaging. Verify that all components, including the extra lenses and operator's manual, are present.
2. Regulacja nakrycia głowy: Place the helmet on your head. Adjust the top strap and the rear knob to ensure a snug yet comfortable fit. The 5-position tilt feature allows you to position the helmet for optimal viewkąt.
3. Usuwanie folii ochronnej: Remove any protective films from both sides of the inner and outer lenses before first use.
4. Kontrola wstępna: Before welding, perform a quick test by exposing the lens to a bright light source (not direct sunlight or a welding arc) to ensure the auto-darkening function is active. The lens should briefly darken.

4. Instrukcja obsługi

4.1 Tryb spawania

• Ensure the helmet is securely fitted and comfortable.
• Adjust the shade knob on the side of the helmet to the desired shade level (9-13) based on your welding process and ampAby uzyskać wskazówki, zapoznaj się ze standardowymi tabelami zacienienia spawalniczego.
• When the welding arc is struck, the lens will automatically darken to the selected shade. When the arc ceases, the lens will return to its light state.

4.2 Tryb mielenia

• To activate grind mode, locate the 'Grind' knob on the side of the helmet and turn it to the 'Grind' position.
• In grind mode, the auto-darkening function is deactivated, allowing for clear, unobstructed vision for grinding or cutting tasks.
• Ważny: Always switch back to a welding shade setting before initiating any welding operations.

5. Konserwacja

• Czyszczenie: Regularly clean the helmet shell with a mild soap and water solution. Avoid harsh abrasives or solvents.
• Pielęgnacja soczewek: Clean the inner and outer protective lenses with a soft, clean cloth and a non-abrasive lens cleaner. Replace scratched or damaged lenses immediately.
• Składowanie: Store the helmet in a dry, clean environment away from direct sunlight and extreme temperatures.
• Sprawdzenie baterii: The auto-darkening lens is solar-powered with a backup battery. Ensure the solar cells are clean and exposed to light regularly to maintain charge.

6. Rozwiązywanie Problemów

• Soczewka nie ściemnia się: Check if the helmet is in grind mode. Ensure the solar cells are clean and exposed to light. Verify the ambient temperature is within the operating range.
• Słaba widoczność: Clean the protective lenses. Ensure the correct shade level is selected for the welding process. Replace scratched or damaged lenses.
• Niewygodne dopasowanie: Adjust the headgear straps and tilt mechanism until a comfortable and secure fit is achieved.

7. Specyfikacje

8. Gwarancja i wsparcie

This Lincoln Electric product is backed by the manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Lincoln Electric website. For technical support, replacement parts, or service inquiries, please contact Lincoln Electric customer service directly.

Informacje kontaktowe:
Webstrona: www.lincolnelectric.com
Phone: 1-888-236-0044 (as per general Lincoln Electric contact information)